3,964 IT Hardware jobs in India
Hardware Engineer
Posted today
Job Viewed
Job Description
**1. If you are a first time user, please create your candidate login account before you apply for a job. (Click Sign In > Create Account)**
**2. If you already have a Candidate Account, please Sign-In before you apply.**
**Job Description:**
Role: Design of SRAM/RFcustom/compiler memories in 3nm/5nm/7FF technologies.
Exp: 5 - 15 Years Responsibilities: SRAM architecture and design; SRAM design to meet yield target, bitcell characterization; advanced circuit design experiences like write/read assist; SRAM characterization flow setup; SRAM deliverables, QA and release process,
Skills needed: EDA tools like Cadence Virtuoso, simulation tools finsim, hspice and xa-ra. Design validation tools solido and MC analysis, Very good debug skill, problem solving and logical reasoning skills. Good communication skills. Should be flexible with work hours and hard working. Good in scripting to analyze large data and summarize. Quick ramp up with new tools and flows.
**Broadcom is proud to be an equal opportunity employer. We will consider qualified applicants without regard to race, color, creed, religion, sex, sexual orientation, national origin, citizenship, disability status, medical condition, pregnancy, protected veteran status or any other characteristic protected by federal, state, or local law. We will also consider qualified applicants with arrest and conviction records consistent with local law.**
**If you are located outside USA, please be sure to fill out a home address as this will be used for future correspondence.**
Welcome! Thank you for your interest in Broadcom!
We are a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions.
For more information please visit our video library ( and check out our Connected by Broadcom ( series.
Follow us on Linked In Broadcom Inc ( .
Hardware Engineer
Posted 3 days ago
Job Viewed
Job Description
IBM Systems division builds Servers, Storage and Systems Software which are the building blocks for next-generation IT infrastructure of enterprise customers and data centers. IBM Servers provide best-in-class reliability, scalability, performance, and end-to-end security to handle mission-critical workloads and provide seamless extension to hybrid multi cloud environments.
India Systems Development Lab (ISDL) is part of word-wide IBM Systems division. Established in 1996, the ISDL Lab is headquartered in Bengaluru, with presence in Pune and Hyderabad as well. ISDL teams work across the IBM Systems stack including Processor development, Firmware, Operating Systems, Systems Software, Storage Software, Cloud Software, Performance Engineering, System Test etc. The ISDL teams also ushered in new development models such as Agile, Design Thinking and DevOps.
**Your role and responsibilities**
IBM Systems development lab works on the development of latest generation processors that power the IBM Z Systems (Mainframe) & IBM Power Systems.
The Enterprise Systems Development team in Bangalore is a microcosm of the global Systems development lab. As a member of the ESD team you will have an opportunity to work on the Design/ Verification/ Pre Silicon Validation / Physical design/ EDA / Library/ Memory characterization/ Post silicon validation of the Processor chip that is being developed in the latest technologies of 5nm , 3nm & Beyond.
**Required technical and professional expertise**
* Digital Logic design, Computer Architecture, RISC V or other processor pipeline knowledge, VLSI design flow and process knowledge, Good understanding of custom circuits , Analog , Digital logic design, memory technologies
* Good programming and scripting ( Python/ Perl) skills are highly desired
**Preferred technical and professional experience**
* Strong Communication, analytical, interpersonal & problem-solving skills
* Master's Degree in VLSI design / Electronics / Computer Science engineering or other relevant specializations in Hardware.
IBM is committed to creating a diverse environment and is proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, caste, genetics, pregnancy, disability, neurodivergence, age, veteran status, or other characteristics. IBM is also committed to compliance with all fair employment practices regarding citizenship and immigration status.
Hardware Engineer
Posted 3 days ago
Job Viewed
Job Description
IBM Systems division builds Servers, Storage and Systems Software which are the building blocks for next-generation IT infrastructure of enterprise customers and data centers. IBM Servers provide best-in-class reliability, scalability, performance, and end-to-end security to handle mission-critical workloads and provide seamless extension to hybrid multi cloud environments.
India Systems Development Lab (ISDL) is part of word-wide IBM Systems division. Established in 1996, the ISDL Lab is headquartered in Bengaluru, with presence in Pune and Hyderabad as well. ISDL teams work across the IBM Systems stack including Processor development, Firmware, Operating Systems, Systems Software, Storage Software, Cloud Software, Performance Engineering, System Test etc. The ISDL teams also ushered in new development models such as Agile, Design Thinking and DevOps.
**Your role and responsibilities**
IBM Systems development lab works on the development of latest generation processors that power the IBM Z Systems (Mainframe) & IBM Power Systems.
The Enterprise Systems Development team in Bangalore is a microcosm of the global Systems development lab. As a member of the ESD team you will have an opportunity to work on the Design/ Verification/ Pre Silicon Validation / Physical design/ EDA / Library/ Memory characterization/ Post silicon validation of the Processor chip that is being developed in the latest technologies of 5nm , 3nm & Beyond.
**Required technical and professional expertise**
* Digital Logic design, Computer Architecture, RISC V or other processor pipeline knowledge, VLSI design flow and process knowledge, Good understanding of custom circuits , Analog , Digital logic design, memory technologies
* Good programming and scripting ( Python/ Perl) skills are highly desired
**Preferred technical and professional experience**
* Strong Communication, analytical, interpersonal & problem-solving skills
* Master's Degree in VLSI design / Electronics / Computer Science engineering or other relevant specializations in Hardware.
IBM is committed to creating a diverse environment and is proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, caste, genetics, pregnancy, disability, neurodivergence, age, veteran status, or other characteristics. IBM is also committed to compliance with all fair employment practices regarding citizenship and immigration status.
Hardware Engineer
Posted 3 days ago
Job Viewed
Job Description
IBM Systems division builds Servers, Storage and Systems Software which are the building blocks for next-generation IT infrastructure of enterprise customers and data centers. IBM Servers provide best-in-class reliability, scalability, performance, and end-to-end security to handle mission-critical workloads and provide seamless extension to hybrid multi cloud environments.
India Systems Development Lab (ISDL) is part of word-wide IBM Systems division. Established in 1996, the ISDL Lab is headquartered in Bengaluru, with presence in Pune and Hyderabad as well. ISDL teams work across the IBM Systems stack including Processor development, Firmware, Operating Systems, Systems Software, Storage Software, Cloud Software, Performance Engineering, System Test etc. The ISDL teams also ushered in new development models such as Agile, Design Thinking and DevOps.
**Your role and responsibilities**
IBM Systems development lab works on the development of latest generation processors that power the IBM Z Systems (Mainframe) & IBM Power Systems.
The Enterprise Systems Development team in Bangalore is a microcosm of the global Systems development lab. As a member of the ESD team you will have an opportunity to work on the Design/ Verification/ Pre Silicon Validation / Physical design/ EDA / Library/ Memory characterization/ Post silicon validation of the Processor chip that is being developed in the latest technologies of 5nm , 3nm & Beyond.
**Required technical and professional expertise**
* Digital Logic design, Computer Architecture, RISC V or other processor pipeline knowledge, VLSI design flow and process knowledge, Good understanding of custom circuits , Analog , Digital logic design, memory technologies
* Good programming and scripting ( Python/ Perl) skills are highly desired
**Preferred technical and professional experience**
* Strong Communication, analytical, interpersonal & problem-solving skills
* Master's Degree in VLSI design / Electronics / Computer Science engineering or other relevant specializations in Hardware.
IBM is committed to creating a diverse environment and is proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, caste, genetics, pregnancy, disability, neurodivergence, age, veteran status, or other characteristics. IBM is also committed to compliance with all fair employment practices regarding citizenship and immigration status.
Hardware Engineer
Posted 3 days ago
Job Viewed
Job Description
+ Experience working in 16/32-bit Micro-controllers / Microprocessor with strong understanding of controller architecture and peripherals.
+ Prior experience of full product development life cycle from requirement to product launch.
+ Low Power supply design and development, Analog signal conditioning using Op-Amp and Digital circuit interfaces.
+ Peripheral interface design experience like - Ethernet / USB / DDRs / ADC / SPI / I2C / LCD Display
+ Circuit simulation (PSpice/LTSpice), signal integrity analysis
+ Hands on experience in board layout and following the best industry standard practices using Altium
+ Experience in DFMEA to identify potential failures and develop remedies to address failures.
+ Experience in EMI/EMC design and testing as per IEC-61326 and other industrial standards.
+ Strong Analytical and debugging skills.
+ Willingness to learn new technology & develop solution needed to meet product needs.
+ Dealing with ambiguous requirements and developing clarity that meets business objectives.
+ Excellent communication and social skills to collaborate with multi-functional teams.
+ Communication Protocols - HART, Bluetooth, Ethernet/IP, PROFINET will be advantageous.
+ Experience working with standard development tools for configuration management, design, and tracking.
**Who You Are:**
You tackle new opportunities and tough challenges with a sense of urgency, high energy, and passion. You relate openly and comfortably with diverse groups of people. You make good and timely decisions that keep the organization moving forward.
**Preferred Qualifications that Set You Apart:**
+ Bachelor of Engineering or equivalent experience in Electronics / Electrical or Equivalent Engineering.
+ 6 + hardware development experience that involves Digital/Analog/Mixed signal designs.
+ Strong core embedded skills to analyze requirements, develop solutions and fix technical challenges.
+ Proven experience in designing the product based on initial requirements that demonstrate end-to-end product development & leading design team from concept to release.
+ Experience developing hardware designs that meets EMI/EMC requirements for harsh industrial environment is must.
+ Well versed with or ability to interpret various industry standards applicable for industrial products and translate them into product design.
+ Experience working in a global engineering environment.
+ Working experience on Bluetooth & other industrial protocols like Ethernet/IP, PROFINET, HART etc from the perspective of developing the hardware will be advantageous.
+ Experience in developing hardware for product that involves pneumatic actuators control valve interface will be an added advantage.
+ Experience working in pneumatic actuators will be advantageous.
+ Strong exposure to product development life cycle processes, tools & methodologies
**Our Culture & Commitment to You**
At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results.
We recognize the importance of employee wellbeing. We prioritize providing competitive benefits plans, a variety of medical insurance plans, Employee Assistance Program, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave.
**WHY EMERSON**
**Our Commitment to Our People**
At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration.
We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor.
At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together.
**Accessibility Assistance or Accommodation**
If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: .
**ABOUT EMERSON**
Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability.
With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety.
We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go!
**No calls or agencies please.**
**Requisition ID** : 25020696
Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.
Hardware Engineer
Posted 3 days ago
Job Viewed
Job Description
About HME Solutions
HME Solutions is a leading innovator in the global mining industry, specialising in the development of advanced Hardware, Technology, and SaaS-based Fleet Management Solutions (FMS) for heavy mining equipment (HME). Our flagship platform, FMS Live™, integrates cutting-edge GNSS machine guidance and automation technologies to drive productivity, precision, and efficiency in both surface and underground mining environments.
Headquartered in Perth, Australia, HME Solutions is rapidly expanding into international markets to meet growing demand. As part of this growth, we are investing in a world-class administrative and technical support hub in Hyderabad, India—home to our software and infrastructure engineering teams. This office plays a critical role in supporting our global operations and driving innovation in mining technology.
Role Overview
We are seeking a technically proficient and hands-on Hardware Engineer to join our fast-growing engineering team at HME Solutions’ new development centre in Hitec City, Hyderabad. This role focuses on the design, validation, integration, and ongoing support of rugged embedded hardware and sensor systems used in real-world mining environments.
You will play a central role in the end-to-end lifecycle of HME’s proprietary hardware platforms, ranging from reverse engineering and vehicle interface mapping to CAN protocol diagnostics, edge integration, and support for GNSS-based control and telemetry modules.
The ideal candidate will bring deep practical knowledge of automotive or industrial electronics, be comfortable working across bench and field environments, and thrive in a multidisciplinary engineering culture that spans embedded systems, mechatronics, and cloud-connected mining technology.
Key Responsibilities
- Interface with automotive and industrial control systems using Automotive CAN, CAN FD , and CAN Open protocols; configure, debug, and validate communication with ECUs and controllers.
- Develop and support PLC logic for system control and industrial automation.
- Perform reverse engineering on third-party or legacy hardware, including signal tracing, schematic recovery, and interface mapping.
- Participate in embedded system integration—working across firmware, Analog or Digital I/O and/or sensors, and control interfaces.
- Conduct in-depth diagnostics using logic analysers, CAN analysers, oscilloscopes, and test instrumentation.
- Support schematic validation, PCB-level debugging, and bring-up of new hardware.
- Define test procedures, perform functional validation, and document hardware behaviour under varying load and environmental conditions.
- Collaborate with software, mechanical, and systems engineers to ensure full-stack system interoperability in mining environments.
- Provide support during field testing and deployment, including debugging at the edge (on mobile equipment in live mine sites).
- Build and maintain an internal hardware compatibility matrix for supported mining equipment models and OEMs (CAT, Komatsu, Hitachi, etc.).
- Lead bench testing and environmental stress testing (vibration, temperature, EMI) to validate hardware performance under mining conditions.
- Create and maintain technical documentation, including wiring schematics, hardware configuration guides, and diagnostic flowcharts.
- Assist with regulatory and compliance preparation (EMC, CE, FCC) for hardware products, where applicable.
- Collaborate with the product and QA teams to simulate edge scenarios and fault modes for hardware validation.
- Participate in cross-site collaboration with HME Australia and mine-site teams during active deployment cycles.
- Provide technical training and mentoring to junior technicians or support engineers during hardware rollouts.
Required Skills & Experience
- 5-7 years of hands-on experience in embedded hardware engineering or automotive electronics.
- Solid working knowledge and hand on experience on Automotive CAN, CAN Open , CAN FD
- Work experience with integrating Analog / Digital IO’s and Sensors.
- Good understanding and knowledge on embed systems development and integration.
- Practical experience with PLC programming for automation or control systems.
- Experience in hardware-level fault isolation, bus signal analysis, and interface debugging.
- Proficiency with diagnostic tools: CAN bus analysers (Vector, Peak, Kvaser), oscilloscopes, and multimeters.
- Strong understanding of digital and analogue circuit behaviour, grounding, shielding, and noise mitigation in harsh environments.
- Experience with reverse engineering hardware or analysing undocumented systems.
- Ability to read and interpret schematics, wiring diagrams, and datasheets.
- Understanding of power systems (12V/24V), automotive-grade signal conditioning, and protection circuitry in harsh environments.
- Experience developing or supporting sensor-based systems (IMUs, RTK GNSS, load sensors, temperature sensors, etc.).
- Ability to assess EMI/ESD sensitivity and mitigate issues in equipment exposed to industrial RF environments.
- Familiarity with firmware bootloaders or flashing procedures for field-deployed embedded devices.
Preferred Qualifications
- Bachelor’s degree in Electronics, Electrical, Mechatronics, or Instrumentation Engineering.
- Experience in automotive, heavy vehicle, or off-highway equipment electronics.
- Familiarity with embedded C for hardware diagnostics or system monitoring.
- Exposure to PCB design tools (Altium Designer, Eagle, or KiCAD).
- Experience in system integration for real-time telemetry or data acquisition platforms.
- Knowledge of ISO 11898 or J1939 standards for heavy vehicle electronics.
- Proficiency with environmental validation tools and lab equipment for field-ready systems.
- Exposure to Modbus, RS-485, or similar legacy fieldbus protocols.
- Prior experience working with mining, construction, or agriculture equipment control systems.
Why Join HME Solutions
- Work on mission-critical hardware for advanced fleet and machine control systems in mining.
- Collaborate with a highly technical global engineering team across electronics, software, and AI domains.
- Be part of a hardware-centric R&D environment focused on ruggedisation, connectivity, and performance.
- Operate from a brand-new facility in Hitec City, Hyderabad , designed to support hardware prototyping, testing, and systems integration.
- Take ownership of hardware that powers live mine operations across India, Australia, and the Middle East.
- Build products that operate at the intersection of industrial automation, edge intelligence, and AI-driven analytics.
- Access to lab infrastructure, test equipment, and prototypes at our Hyderabad technology centre.
- Opportunities to visit field sites and directly observe your solutions in use, driving real operational impact.
- Work in a cross-functional team with opportunities to grow into system architecture or product innovation roles.
Hardware Engineer
Posted 4 days ago
Job Viewed
Job Description
Company Profile:
Blue Star is India's leading Heating, Ventilation, Air conditioning and Commercial Refrigeration (HVAC&R) Company, with an annual revenue of over Rs 8000 crores, a network of 30 offices, 7 modern manufacturing facilities including the new state-of-the-art deep freezer facility at Wada, and Blue Star Climatech Limited’s world-class facility at Sri City; 3132 employees, and 4040 channel partners. The Company has manufacturing facilities at Dadra, Himachal Pradesh, Wada and Ahmedabad, which use modern, state-of-the-art manufacturing equipment to ensure that the products have consistent quality and reliability. The Company has a manufacturing footprint of more than 1 lakh sq m, with the mainstay of product development and R&D being energy-efficiency, coupled with eco-friendly and sustainable products.
Website:
PURPOSE OF THE ROLE:
Design & Develop Electronics as per the requirement of HVAC product.
Education: B.E/B.Tech/M.E/M.Tech - Electronics/ Electrical/Instrumentation
Responsibilities:
- To Design & Develop Electronics for HVAC Ensuring its DFM, Reliability, Cost Targets & On-time Delivery.
- Perform EMI-EMC & Environmental test to prove reliability of designs.
- Prepare Schematic, BOM, Design Calculations & Test Reports.
- Prepare Quality Documents like DFMEA, MTBF, Derating
- Provide Support for developing Setups for ICT & FCT
- Directly own and contributes to solving Field issues.
Technical Expertise:
- Minimum 5 years of hands on experience in designing AC to DC, DC-DC Power Supply & Microcontroller based electronics Circuits.
- Knowledge of New Product Development Process of Electronic product.
- Hands On Experience in using Altium Designer.
- Knowledge of Quality documents like DFMEA, MTBF & Derating.
- Hands On Experience of Electronics Circuit Simulation tools.
Be The First To Know
About the latest It hardware Jobs in India !
Hardware Engineer
Posted 4 days ago
Job Viewed
Job Description
About Us
Founded in New Delhi, India, Esconet Technologies Limited is a leading name in IT Infrastructure solution sales and services. Formerly known as Esconet Technologies Pvt. Ltd., we transitioned to a public company in September 2023. With a goal to elevate the future of digital transformation, we are committed to providing robust, scalable, and sustainable IT solutions to our diverse clientele.
Esconet Technologies is a trusted partner for top OEMs, including Dell Technologies, HPE, VMware, Intel, AMD, NVIDIA, Cisco, Arista, Cato Networks and Microsoft. Our offerings range from Servers, GPU-based Workstations, Data Storage Systems, to Supercomputers under our own brand, HexaData. We design, develop, and deploy high-quality solutions that are tailored to meet the unique needs of businesses in SME, Enterprise, Government, and Public Sector verticals.
About the Role:
We’re looking for a technically sound and detail-oriented professional to lead the certification process of HexaData servers, storage systems, and HPC appliances on leading operating systems and hypervisors. The role involves planning, testing, documentation, and liaising with OEMs and software vendors to obtain official compatibility certifications.
Location: New Delhi (On-site)
Key Responsibilities:
- Drive end-to-end certification of HexaData hardware on:
-Enterprise Linux distributions (RHEL, Ubuntu, SUSE, etc.)
-Microsoft Windows Server OS
-VMware ESXi
-ProxMox
- Coordinate with OS and hypervisor vendors for submission and approval.
- Set up test labs with target configurations and simulate real-world use cases.
- Work closely with product engineering and QA teams to resolve compatibility or driver issues.
- Prepare and submit detailed documentation, hardware compatibility matrices (HCL), and test logs as required.
- Track and manage certification timelines and ensure compliance with vendor-specific requirements.
- Maintain and publish up-to-date certification statuses and documentation for customer use.
Skills & Qualifications :
- Bachelor’s degree in computer science, Electronics, or a related field.
- 3+ years of experience in hardware testing, OS installation/configuration, or system validation roles.
- Hands-on experience with enterprise servers, BIOS/firmware, RAID/HBA cards, and drivers.
- Familiarity with certification programs of Microsoft, Red Hat, VMware, etc.
- Working knowledge of scripting (Bash, PowerShell) is a plus.
- Strong documentation and coordination skills.
Hardware Engineer
Posted 4 days ago
Job Viewed
Job Description
BTL India is looking for an electronics hardware Engineer for a senior role with 6 to 8 years of experience to join our R&D Improvement and Support team, which play a major role in ensuring continued design support to post market releases.
ROLES AND RESPONSIBILITIES
As part of the R&D team, should be able to perform the following duties as assigned by Manager/Leads to support the team’s goals but not limited to the following:
- Understanding of system level, hardware design & requirements of the system/product.
- Lead the investigation of production and field issues/failures
- Understand the technical issues and drive the root cause analysis.
- Collaborate with engineering and production to provide solutions.
-Work on closures as per commitments
- Own and execute mitigations for components obsolescence/supply chain issues:
- Provide timely solutions to prevent production stop situations
-Identify alternate components based on design requirements & component specification/datasheet comparisons
- Perform evaluation & testing as needed for alternate qualifications
- Perform necessary hands-on testing at circuit level / module level / product level to evaluate the hardware performance for identified HW design changes.
- Work on circuit simulations, schematics entry, BOM management and PCB layout reviews as needed.
- Responsible in design change implementations through ECO
-Own documentation and co-ordinate reviews and approvals required to process the ECO.
- Own and implement new feature developments, compliance testing and country registrations for products in production.
- Responsible for planning, coordinating and implementing considering the timeline, capacities and cost impact etc.
- Work efficiently with cross functional and production teams to deliver the assigned task/project with quality within the timelines. Production testing – Responsible in fixture and tools development needed for production.
ESSENTIAL QUALIFICATION AND EXPERIENCE
QUALIFICATION:
- BE / B.Tech / ME / M.Tech in Electrical/Electronics/Biomedical engineering or equivalent.
- 6 to 8 Years of experience in working with Hardware designs
TECHNICAL COMPETENCY:
- Strong in fundamentals of Analog and digital electronics.
- Familiar with the concepts of Microcontrollers / Microprocessors operation and the hardware requirements for designing circuits using them.
- Understanding of power management systems – DCDC (Buck/Boost) and LDOs.
- Knowledge of hardware design for communication protocols like UART, SPI, I2C, RS232, USB.
- Proficient in component selection for circuit design.
- Experience in using common lab equipment like DMMs, Oscilloscopes, power supplies, Signal generators.
- Understanding of production process of PCB assembly & production testing
BEHAVIORAL COMPETENCY:
- Good analytical skills
- Passion for success and being proactive - Take risk and time sensitive approach.
- Systemic and going in-depth approach
- Be flexible, hands-on and willing to learn new technologies
- Be a good team player, with good collaboration skills.
ADDITIONAL QUALIFICATION AND EXPERIENCE
- Circuit simulation experience (LT spice or equivalent)
- Familiar or exposure in EMI/EMC testing
- Understanding of Production, Regulatory and Standards
- Project Management - planning and effort estimation experience will be an added advantage.
Hardware Engineer
Posted today
Job Viewed
Job Description
About HME Solutions
HME Solutions is a leading innovator in the global mining industry, specialising in the development of advanced Hardware, Technology, and SaaS-based Fleet Management Solutions (FMS) for heavy mining equipment (HME). Our flagship platform, FMS LiveTM, integrates cutting-edge GNSS machine guidance and automation technologies to drive productivity, precision, and efficiency in both surface and underground mining environments.
Headquartered in Perth, Australia, HME Solutions is rapidly expanding into international markets to meet growing demand. As part of this growth, we are investing in a world-class administrative and technical support hub in Hyderabad, India—home to our software and infrastructure engineering teams. This office plays a critical role in supporting our global operations and driving innovation in mining technology.
Role Overview
We are seeking a technically proficient and hands-on Hardware Engineer to join our fast-growing engineering team at HME Solutions’ new development centre in Hitec City, Hyderabad. This role focuses on the design, validation, integration, and ongoing support of rugged embedded hardware and sensor systems used in real-world mining environments.
You will play a central role in the end-to-end lifecycle of HME’s proprietary hardware platforms, ranging from reverse engineering and vehicle interface mapping to CAN protocol diagnostics, edge integration, and support for GNSS-based control and telemetry modules.
The ideal candidate will bring deep practical knowledge of automotive or industrial electronics, be comfortable working across bench and field environments, and thrive in a multidisciplinary engineering culture that spans embedded systems, mechatronics, and cloud-connected mining technology.
Key Responsibilities
- Interface with automotive and industrial control systems using Automotive CAN, CAN FD, and CAN Open protocols; configure, debug, and validate communication with ECUs and controllers.
- Develop and support PLC logic for system control and industrial automation.
- Perform reverse engineering on third-party or legacy hardware, including signal tracing, schematic recovery, and interface mapping.
- Participate in embedded system integration—working across firmware, Analog or Digital I/O and/or sensors, and control interfaces.
- Conduct in-depth diagnostics using logic analysers, CAN analysers, oscilloscopes, and test instrumentation.
- Support schematic validation, PCB-level debugging, and bring-up of new hardware.
- Define test procedures, perform functional validation, and document hardware behaviour under varying load and environmental conditions.
- Collaborate with software, mechanical, and systems engineers to ensure full-stack system interoperability in mining environments.
- Provide support during field testing and deployment, including debugging at the edge (on mobile equipment in live mine sites).
- Build and maintain an internal hardware compatibility matrix for supported mining equipment models and OEMs (CAT, Komatsu, Hitachi, etc.).
- Lead bench testing and environmental stress testing (vibration, temperature, EMI) to validate hardware performance under mining conditions.
- Create and maintain technical documentation, including wiring schematics, hardware configuration guides, and diagnostic flowcharts.
- Assist with regulatory and compliance preparation (EMC, CE, FCC) for hardware products, where applicable.
- Collaborate with the product and QA teams to simulate edge scenarios and fault modes for hardware validation.
- Participate in cross-site collaboration with HME Australia and mine-site teams during active deployment cycles.
- Provide technical training and mentoring to junior technicians or support engineers during hardware rollouts.
Required Skills & Experience
- 5-7 years of hands-on experience in embedded hardware engineering or automotive electronics.
- Solid working knowledge and hand on experience on Automotive CAN, CAN Open, CAN FD
- Work experience with integrating Analog / Digital IO’s and Sensors.
- Good understanding and knowledge on embed systems development and integration.
- Practical experience with PLC programming for automation or control systems.
- Experience in hardware-level fault isolation, bus signal analysis, and interface debugging.
- Proficiency with diagnostic tools: CAN bus analysers (Vector, Peak, Kvaser), oscilloscopes, and multimeters.
- Strong understanding of digital and analogue circuit behaviour, grounding, shielding, and noise mitigation in harsh environments.
- Experience with reverse engineering hardware or analysing undocumented systems.
- Ability to read and interpret schematics, wiring diagrams, and datasheets.
- Understanding of power systems (12V/24V), automotive-grade signal conditioning, and protection circuitry in harsh environments.
- Experience developing or supporting sensor-based systems (IMUs, RTK GNSS, load sensors, temperature sensors, etc.).
- Ability to assess EMI/ESD sensitivity and mitigate issues in equipment exposed to industrial RF environments.
- Familiarity with firmware bootloaders or flashing procedures for field-deployed embedded devices.
Preferred Qualifications
- Bachelor’s degree in Electronics, Electrical, Mechatronics, or Instrumentation Engineering.
- Experience in automotive, heavy vehicle, or off-highway equipment electronics.
- Familiarity with embedded C for hardware diagnostics or system monitoring.
- Exposure to PCB design tools (Altium Designer, Eagle, or KiCAD).
- Experience in system integration for real-time telemetry or data acquisition platforms.
- Knowledge of ISO 11898 or J1939 standards for heavy vehicle electronics.
- Proficiency with environmental validation tools and lab equipment for field-ready systems.
- Exposure to Modbus, RS-485, or similar legacy fieldbus protocols.
- Prior experience working with mining, construction, or agriculture equipment control systems.
Why Join HME Solutions
- Work on mission-critical hardware for advanced fleet and machine control systems in mining.
- Collaborate with a highly technical global engineering team across electronics, software, and AI domains.
- Be part of a hardware-centric R&D environment focused on ruggedisation, connectivity, and performance.
- Operate from a brand-new facility in Hitec City, Hyderabad, designed to support hardware prototyping, testing, and systems integration.
- Take ownership of hardware that powers live mine operations across India, Australia, and the Middle East.
- Build products that operate at the intersection of industrial automation, edge intelligence, and AI-driven analytics.
- Access to lab infrastructure, test equipment, and prototypes at our Hyderabad technology centre.
- Opportunities to visit field sites and directly observe your solutions in use, driving real operational impact.
- Work in a cross-functional team with opportunities to grow into system architecture or product innovation roles.