17 Lifting Supervisor jobs in India

Scope of Services

The selected candidate will work in coordination with the company's project engineers. Services may include, but are not limited to:

• Engineering analysis and documentation for heavy lift and transport load handling plans
• Development of load handling plans, including load path analysis
• Structural calculations, equipment selection, and rigging configuration
• Finite Element Analysis (FEA) and other simulations as required
• CAD modeling and drafting of lift configurations and equipment layouts
• Compliance verification with relevant US and Canadian codes, standards, and safety regulations (e.g., ASME, OSHA, AISC, etc.)

Qualification Requirements

Interested candidates should demonstrate:

• Proven experience in heavy lift, transport and rigging engineering
• Educational background with relevant discipline (Civil, Structural, Mechanical)
• Proficiency with relevant engineering software (AutoCAD, Inventor, RISA3D, MathCAD, etc.)
• Familiarity with heavy lift equipment such as hydraulic gantries, strand jacks, hydraulic skidding systems, cranes, etc.
• Ability to respond quickly to project demands with flexibility and efficiency

Software Requirements

Qualified candidates must have access to and demonstrate proficiency with the following software programs:

• Autodesk Suite (AutoCAD, Inventor, Revit, etc.)
• Microsoft Office Suite
• RISA3D v22.0
• RISASection v2.1
• MathCad Prime v10.0
• Ansys 2024 (FEA and structural simulation)

Practical and Technical Assessment (Mandatory)

All candidates are required to complete a Practical and Technical assessment designed to evaluate their engineering capabilities, critical thinking, and application of relevant standards and equipment. This assessment is a key component in the overall evaluation and scoring of proposals.

Assessment Scenario

A 250,000-pound cylindrical pressure vessel (approximately 60 feet long and 12 feet in diameter) must be:

• Offloaded from a hydraulic platform trailer using a hydraulic gantry system
• Lowered onto a slide track system
• Horizontally translated under a pipe rack with 14 feet of clearance above grade
• Upended to vertical orientation using a mobile crane in conjunction with the gantry system used to tail the vessel
• Set onto a concrete foundation

Site constraints include:

• Limited headroom under the pipe rack
• Limited space for crane setup adjacent to the upending area
• Soil bearing capacity of 3,500 psf
• No overhead obstructions other than the pipe rack

Required Deliverables

Each candidate shall develop and submit a complete engineering and lift plan package that addresses all five steps above. Deliverables must include:

1. Lift Sequence Narrative

· Detailed step-by-step description of each phase of the operation

· Identification of critical lifts and transitions (e.g., from gantry to crane)

· Discussion of site constraints, setup logistics, and safety precautions

2. Engineering Calculations

· Rigging configuration loads and capacity checks

· Hydraulic gantry and crane selection and justification

· Ground bearing pressure and support analysis for equipment

· Sliding system design or configuration

· Upending load sharing and stability analysis during transition phase

3. Drawings and Diagrams

· Plan and elevation views of each phase of the lift

· Equipment layout including gantry, crane, slide path, and foundation

· Load paths, rigging geometry, and CG location

· Schematic of upending transition (combined lift)

Scope of Services

The selected candidate will work in coordination with the company's project engineers. Services may include, but are not limited to:

• Engineering analysis and documentation for heavy lift and transport load handling plans
• Development of load handling plans, including load path analysis
• Structural calculations, equipment selection, and rigging configuration
• Finite Element Analysis (FEA) and other simulations as required
• CAD modeling and drafting of lift configurations and equipment layouts
• Compliance verification with relevant US and Canadian codes, standards, and safety regulations (e.g., ASME, OSHA, AISC, etc.)

Qualification Requirements

Interested candidates should demonstrate:

• Proven experience in heavy lift, transport and rigging engineering
• Educational background with relevant discipline (Civil, Structural, Mechanical)
• Proficiency with relevant engineering software (AutoCAD, Inventor, RISA3D, MathCAD, etc.)
• Familiarity with heavy lift equipment such as hydraulic gantries, strand jacks, hydraulic skidding systems, cranes, etc.
• Ability to respond quickly to project demands with flexibility and efficiency

Software Requirements

Qualified candidates must have access to and demonstrate proficiency with the following software programs:

• Autodesk Suite (AutoCAD, Inventor, Revit, etc.)
• Microsoft Office Suite
• RISA3D v22.0
• RISASection v2.1
• MathCad Prime v10.0
• Ansys 2024 (FEA and structural simulation)

Practical and Technical Assessment (Mandatory)

All candidates are required to complete a Practical and Technical assessment designed to evaluate their engineering capabilities, critical thinking, and application of relevant standards and equipment. This assessment is a key component in the overall evaluation and scoring of proposals.

Assessment Scenario

A 250,000-pound cylindrical pressure vessel (approximately 60 feet long and 12 feet in diameter) must be:

• Offloaded from a hydraulic platform trailer using a hydraulic gantry system
• Lowered onto a slide track system
• Horizontally translated under a pipe rack with 14 feet of clearance above grade
• Upended to vertical orientation using a mobile crane in conjunction with the gantry system used to tail the vessel
• Set onto a concrete foundation

Site constraints include:

• Limited headroom under the pipe rack
• Limited space for crane setup adjacent to the upending area
• Soil bearing capacity of 3,500 psf
• No overhead obstructions other than the pipe rack

Required Deliverables

Each candidate shall develop and submit a complete engineering and lift plan package that addresses all five steps above. Deliverables must include:

1. Lift Sequence Narrative

·   Detailed step-by-step description of each phase of the operation

·   Identification of critical lifts and transitions (e.g., from gantry to crane)

·   Discussion of site constraints, setup logistics, and safety precautions

2. Engineering Calculations

·   Rigging configuration loads and capacity checks

·   Hydraulic gantry and crane selection and justification

·   Ground bearing pressure and support analysis for equipment

·   Sliding system design or configuration

·   Upending load sharing and stability analysis during transition phase

3. Drawings and Diagrams

·   Plan and elevation views of each phase of the lift

·   Equipment layout including gantry, crane, slide path, and foundation

·   Load paths, rigging geometry, and CG location

·   Schematic of upending transition (combined lift)

Dispensary Operator - Day Shift - Must have heavy lifting experience - Pharma

Dispensary Operator - Day Shift

Seeking a Dispensary Operator who has a good drive for results, is reliable, energetic, physically fit with good numerical competence. Apply now!

Hourly rate: $35.90 (40 Hour Week)Spread of hours: 6:00/7:00 – 14:20-15:20 as well as 9am-5pm

South Eastern SuburbsTraining and Development opportunities

Stable Secure Employment within the Pharmaceutical Industry (Essential Services)Excellent management & team

Permanent Full-Time RoleMust have heavy lifting experience e.g:

The role has a high level of intensity required for the manual handling aspect. Operators may be required to be stacking 25kg containers for consecutive hours of the day, or, handling 200kg (net) drums or scooping ~4kg scoop-fulls of material for consecutive hours of the day. Whilst all safety and manual handling precautions are in place, we’re looking for people ready and willing to take on this physical aspect; as you’re moving and working the entire shift.

3+ years experience in a similar role is a must along with experience working on the day shift is mandatory, also must have PR residency or NZ/AU citizenship.

Purpose of the Role:

Pick and Dispense materials in accordance with Manufacturing Methods, Recipes, Standard Operating Procedures (SOPs) and other requirements as specified whilst ensuring all pharmaceutical manufacturing product is made according to all relevant quality standards in a safe and timely manner.

Day to day tasks include, but not limited to:

Work in all areas of Manufacturing as required with the primary responsibility being the Dispensary and Material Staging, reviewing and signing off on batch documents.

Carry out tasks in the required time frames.

Use computerised systems such as 3WS, SAP, Bulk Dispensing systems and Manufacturing HMIs to control processes. Investigate and resolve issues with SAP, 3WS, Deviations, Out of Limits Results and other anomalies.

Optimise materials usage and time.

Work with R&D, QA and Engineering to develop and improve manufacturing methods and related processes while continuously reviewing these and striving to minimise the use of resources including labour, equipment capacity, cost, waste, water, energy and surfactants.

Proactively identify and implement improvements to manufacturing processes.

Analyse non-conformances and deviations, recommend solutions and develop & implement matrices to track outcomes.

Analyse process data and report findings based on statistical evidence and trending.

Provide recommendations based on analysis for manufacturing improvements which will enhance capability and performance.

Become a leader in continuous improvement.

Undertake technical ‘hands on’ activities when required.

Participate in process improvement teams to assist improvements and aid changes involved in the manufacturing department.

Implement new technology and equipment within the manufacturing environment to improve efficiency and quality.

Perform troubleshooting activities for manufacturing processes with the objective to guarantee that product is delivered on time and always meets quality standards.

Liaise with Production Planner, Engineering and Quality.

Documentation

Follow SOPs that apply in all relevant areas.

Create, contribute to and maintain SOPs and Forms according to standards for all manufacturing operations.

Comply with Good Manufacturing Practice (GMP) principles and protocols.

Utilise good documentation practices for all documentation including completion of manufacturing methods, checklists, forms and logbooks.

Prepare Deviation Reports, including thorough investigations to determine root cause and suitable corrective and preventive actions.

Review all completed batch documents for correctness and completion before they are submitted to Quality as required.

Clean and sanitise equipment according to SOPs.

Ensure that routine quality maintenance and calibrations are performed in accordance to the published schedule.

Perform Material Handling duties as required.

Report any quality or safety issues to Team Leader or Supervisor.

Participate in required training, including SOPs, GMP, OH&S and 5S.

To be selected for this role you must:

Have 3+ years experience in a similar role along with experience working on the night shift is mandatory.

Mechanical Aptitude and can-do attitude.

Be a quick learner and have the ability to multitask.

Proven track record with leading safety and continuous improvement initiatives.

Possess high attention to detail and genuine care and pride in your work.

Have excellent communication skills and the ability to develop strong working relationships right across the business.

Demonstrated knowledge of GMP principles and OH&S requirements.

Car & Licence

Live in close proximity to the South Eastern Suburbs or have proof that you are moving nearby

Due to the high amount of candidate responses we are receiving at the moment, please note that only shortlisted candidates will be notified

IMPORTANT: It is a requirement of all our jobs that you have a PR or AU/NZ Citizenship. A work visa is not sufficient as all our jobs are permanent. Please do not apply if you do not meet these requirements.

Apply Now

Job Overview

We are seeking a dedicated Construction Safety professional for a full-time, mid-level position based in Coimbatore. The candidate must have a minimum of 4 years of work experience in the construction safety domain. This role involves ensuring the highest safety standards at construction sites and managing risk effectively.

Qualifications and Skills

• OSHA Compliance (Mandatory skill): Proven ability to understand and implement OSHA standards and guidelines in a construction environment.
• Incident Investigation (Mandatory skill): Experience in conducting thorough investigations of safety incidents to determine root causes and prevent recurrences.
• Risk Assessment (Mandatory skill): Skilled in evaluating potential risks at construction sites and implementing measures to mitigate them.
• Hazard Identification: Proficiency in identifying potential safety hazards on construction sites and addressing them promptly.
• Safety Training: Ability to develop and conduct safety training programs to educate workers on company policies and practices.
• PPE Management: Efficient management of personal protective equipment to ensure availability and compliance on site.
• Monitoring Compliance: Expertise in monitoring compliance with safety regulations and actions to rectify non-compliance issues.
• Communication Skills: Strong verbal and written communication skills for preparing safety reports and interaction at all levels.

Roles and Responsibilities

• Ensure company adherence to all safety laws and regulations at construction sites.
• Conduct regular inspections and risk assessments to identify potential hazards.
• Lead incident investigations and develop action plans to prevent future occurrences.
• Develop and deliver safety training to promote awareness among construction teams.
• Manage and oversee the distribution and correct use of personal protective equipment.
• Prepare detailed reports on safety operations, incidents, and compliance activities.
• Collaborate with construction managers to integrate safety into all aspects of operations.
• Liaise with regulatory bodies to ensure conformity with safety legislation and standards.

Job Overview

We are seeking a dedicated Construction Safety professional for a full-time, mid-level position based in Coimbatore. The candidate must have a minimum of 4 years of work experience in the construction safety domain. This role involves ensuring the highest safety standards at construction sites and managing risk effectively.

Qualifications and Skills

• OSHA Compliance (Mandatory skill): Proven ability to understand and implement OSHA standards and guidelines in a construction environment.
• Incident Investigation (Mandatory skill): Experience in conducting thorough investigations of safety incidents to determine root causes and prevent recurrences.
• Risk Assessment (Mandatory skill): Skilled in evaluating potential risks at construction sites and implementing measures to mitigate them.
• Hazard Identification: Proficiency in identifying potential safety hazards on construction sites and addressing them promptly.
• Safety Training: Ability to develop and conduct safety training programs to educate workers on company policies and practices.
• PPE Management: Efficient management of personal protective equipment to ensure availability and compliance on site.
• Monitoring Compliance: Expertise in monitoring compliance with safety regulations and actions to rectify non-compliance issues.
• Communication Skills: Strong verbal and written communication skills for preparing safety reports and interaction at all levels.

Roles and Responsibilities

• Ensure company adherence to all safety laws and regulations at construction sites.
• Conduct regular inspections and risk assessments to identify potential hazards.
• Lead incident investigations and develop action plans to prevent future occurrences.
• Develop and deliver safety training to promote awareness among construction teams.
• Manage and oversee the distribution and correct use of personal protective equipment.
• Prepare detailed reports on safety operations, incidents, and compliance activities.
• Collaborate with construction managers to integrate safety into all aspects of operations.
• Liaise with regulatory bodies to ensure conformity with safety legislation and standards.

1. Job Title : Construction Safety Officer
2. Location : Hyderabad
3. Interested Candidates can share your resumes to WhatsApp: or you can mail @ (HIDDEN TEXT)
4. Ensure the highest safety standards are maintained.

• Develop and implement site-specific safety plans and procedures.
• Conduct regular safety inspections and audits of construction sites.
• Identify potential hazards and implement corrective actions to mitigate risks.
• Ensure compliance with all applicable health and safety regulations and standards.
• Provide safety training and toolbox talks to site personnel.
• Investigate accidents, incidents, and near misses, and prepare detailed reports.
• Recommend and implement measures to prevent recurrence of incidents.
• Maintain accurate safety records and documentation.
• Promote a strong safety culture throughout the organization.
• Liaise with site management, clients, and regulatory authorities on safety matters.

• Bachelor's degree in Occupational Health and Safety, Engineering, or a related field.
• Professional certification in safety management (e.g., NEBOSH, OSHA).
• Proven experience as a Safety Officer in the construction industry.
• In-depth knowledge of construction site operations and safety practices.
• Strong understanding of health and safety legislation and compliance requirements.
• Excellent analytical, problem-solving, and risk assessment skills.
• Proficiency in safety management software and tools.
• Strong communication, presentation, and reporting skills.
• Ability to work independently and manage responsibilities remotely.
• Commitment to promoting a safe and healthy work environment.