5,112 Bharat Electronics Limited jobs in India

Seeking a hands-on Electronics Design Engineer with experience in:

● Circuit design (analog/digital, power electronics, protection)

● Microcontroller integration

● Schematic and PCB design

● End-to-end hardware development from prototype to production

Key Responsibilities

Circuit Design & Analysis:

● Design analog/digital circuits for embedded systems

● Build custom power supply circuits: buck/boost converters, linear regulators

● Implement protection circuits: overvoltage, reverse polarity, ESD, current limiting

● Perform intelligent component selection (electrical, thermal, cost, lifecycle)

Embedded System Integration:

● Interface microcontrollers (ESP32, STM32, etc.) with sensors and peripherals

● Design communication interfaces: SPI, I2C, UART, CAN, RS-485, Ethernet

● Handle signal conditioning and level translation where needed

● Understand signal integrity, grounding, and noise mitigation in mixed-signal designs

Schematic & PCB Development:

● Develop production-ready schematics and multi-layer PCB layouts● Use Altium Designer, KiCAD, or Eagle for design and layout

● Apply layout best practices: power distribution, trace impedance, analog/digital isolation

P

rototyping, Testing & Validation:●

Perform hardware bring-up and debugging using lab tools (oscilloscope, multimeter,l

ogic analyzer)●

Validate electrical functionality and system-level behavior●

Create and maintain all design documentation: schematics, BOMs, Gerbers, testp

rocedures, and reports●

Work closely with firmware and mechanical teams for full-stack integration●

Coordinate with external vendors for PCB fabrication and assemblyR

equired Qualifications●

Bachelor’s/Master’s in Electronics or Electrical Engineering●

2+ years of experience in circuit and embedded system design●

Proficient in PCB tools (Altium, KiCAD, Eagle)●

Strong in power electronics, analog/digital interfacing, microcontroller-based design●

Deep understanding of component behavior, datasheet interpretation, and electricala

nalysis●

Hands-on with debugging, test equipment, and circuit validation●

Familiar with EMI/EMC, grounding, and layout best practicesP

referred Skills●

Experience in robotics, automation, or IoT●

Experience with external PCB/assembly vendors●

Familiarity with thermal design, power budgeting, and current calculations

Seeking a hands-on Electronics Design Engineer with experience in:

● Circuit design (analog/digital, power electronics, protection)

● Microcontroller integration

● Schematic and PCB design

● End-to-end hardware development from prototype to production

Key Responsibilities

Circuit Design & Analysis:

● Design analog/digital circuits for embedded systems

● Build custom power supply circuits: buck/boost converters, linear regulators

● Implement protection circuits: overvoltage, reverse polarity, ESD, current limiting

● Perform intelligent component selection (electrical, thermal, cost, lifecycle)

Embedded System Integration:

● Interface microcontrollers (ESP32, STM32, etc.) with sensors and peripherals

● Design communication interfaces: SPI, I2C, UART, CAN, RS-485, Ethernet

● Handle signal conditioning and level translation where needed

● Understand signal integrity, grounding, and noise mitigation in mixed-signal designs

Schematic & PCB Development:

● Develop production-ready schematics and multi-layer PCB layouts● Use Altium Designer, KiCAD, or Eagle for design and layout

● Apply layout best practices: power distribution, trace impedance, analog/digital isolation

P

rototyping, Testing & Validation:●

Perform hardware bring-up and debugging using lab tools (oscilloscope, multimeter,l

ogic analyzer)●

Validate electrical functionality and system-level behavior●

Create and maintain all design documentation: schematics, BOMs, Gerbers, testp

rocedures, and reports●

Work closely with firmware and mechanical teams for full-stack integration●

Coordinate with external vendors for PCB fabrication and assemblyR

equired Qualifications●

Bachelor’s/Master’s in Electronics or Electrical Engineering●

2+ years of experience in circuit and embedded system design●

Proficient in PCB tools (Altium, KiCAD, Eagle)●

Strong in power electronics, analog/digital interfacing, microcontroller-based design●

Deep understanding of component behavior, datasheet interpretation, and electricala

nalysis●

Hands-on with debugging, test equipment, and circuit validation●

Familiar with EMI/EMC, grounding, and layout best practicesP

referred Skills●

Experience in robotics, automation, or IoT●

Experience with external PCB/assembly vendors●

Familiarity with thermal design, power budgeting, and current calculations

Seeking a hands-on Electronics Design Engineer with experience in:

● Circuit design (analog/digital, power electronics, protection)

● Microcontroller integration

● Schematic and PCB design

● End-to-end hardware development from prototype to production

Key Responsibilities:

Circuit Design & Analysis

● Design analog/digital circuits for embedded systems

● Build custom power supply circuits: buck/boost converters, linear regulators

● Implement protection circuits: overvoltage, reverse polarity, ESD, current limiting

● Perform intelligent component selection (electrical, thermal, cost, lifecycle)

Embedded System Integration

● Interface microcontrollers (ESP32, STM32, etc.) with sensors and peripherals

● Design communication interfaces: SPI, I2C, UART, CAN, RS-485, Ethernet

● Handle signal conditioning and level translation where needed

● Understand signal integrity, grounding, and noise mitigation in mixed-signal designs

Schematic & PCB Development

● Develop production-ready schematics and multi-layer PCB layouts

● Use Altium Designer, KiCAD, or Eagle for design and layout

● Apply layout best practices: power distribution, trace impedance, analog/digital isolation

Prototyping, Testing & Validation

● Perform hardware bring-up and debugging using lab tools (oscilloscope, multimeter, logic analyzer)

● Validate electrical functionality and system-level behavior

● Create and maintain all design documentation: schematics, BOMs, Gerbers, test p

rocedures, and reports

● Work closely with firmware and mechanical teams for full-stack integration

● Coordinate with external vendors for PCB fabrication and assembly

Seeking a hands-on Electronics Design Engineer with experience in:● Circuit design (analog/digital, power electronics, protection)● Microcontroller integration● Schematic and PCB design● End-to-end hardware development from prototype to productionKey ResponsibilitiesCircuit Design & Analysis:● Design analog/digital circuits for embedded systems● Build custom power supply circuits: buck/boost converters, linear regulators● Implement protection circuits: overvoltage, reverse polarity, ESD, current limiting● Perform intelligent component selection (electrical, thermal, cost, lifecycle)Embedded System Integration:● Interface microcontrollers (ESP32, STM32, etc.) with sensors and peripherals● Design communication interfaces: SPI, I2 C, UART, CAN, RS-485, Ethernet● Handle signal conditioning and level translation where needed● Understand signal integrity, grounding, and noise mitigation in mixed-signal designsSchematic & PCB Development:● Develop production-ready schematics and multi-layer PCB layouts● Use Altium Designer, Ki CAD, or Eagle for design and layout● Apply layout best practices: power distribution, trace impedance, analog/digital isolationPrototyping, Testing & Validation:● Perform hardware bring-up and debugging using lab tools (oscilloscope, multimeter,logic analyzer)● Validate electrical functionality and system-level behavior● Create and maintain all design documentation: schematics, BOMs, Gerbers, testprocedures, and reports● Work closely with firmware and mechanical teams for full-stack integration● Coordinate with external vendors for PCB fabrication and assemblyRequired Qualifications● Bachelor’s/Master’s in Electronics or Electrical Engineering● 2+ years of experience in circuit and embedded system design● Proficient in PCB tools (Altium, Ki CAD, Eagle)● Strong in power electronics, analog/digital interfacing, microcontroller-based design● Deep understanding of component behavior, datasheet interpretation, and electricalanalysis● Hands-on with debugging, test equipment, and circuit validation● Familiar with EMI/EMC, grounding, and layout best practicesPreferred Skills● Experience in robotics, automation, or Io T● Experience with external PCB/assembly vendors● Familiarity with thermal design, power budgeting, and current calculations

Seeking a hands-on Electronics Design Engineer with experience in:

● Circuit design (analog/digital, power electronics, protection)

● Microcontroller integration

● Schematic and PCB design

● End-to-end hardware development from prototype to production

Key Responsibilities:

Circuit Design & Analysis

● Design analog/digital circuits for embedded systems

● Build custom power supply circuits: buck/boost converters, linear regulators

● Implement protection circuits: overvoltage, reverse polarity, ESD, current limiting

● Perform intelligent component selection (electrical, thermal, cost, lifecycle)

Embedded System Integration

● Interface microcontrollers (ESP32, STM32, etc.) with sensors and peripherals

● Design communication interfaces: SPI, I2C, UART, CAN, RS-485, Ethernet

● Handle signal conditioning and level translation where needed

● Understand signal integrity, grounding, and noise mitigation in mixed-signal designs

Schematic & PCB Development

● Develop production-ready schematics and multi-layer PCB layouts

● Use Altium Designer, KiCAD, or Eagle for design and layout

● Apply layout best practices: power distribution, trace impedance, analog/digital isolation

Prototyping, Testing & Validation

● Perform hardware bring-up and debugging using lab tools (oscilloscope, multimeter, logic analyzer)

● Validate electrical functionality and system-level behavior

● Create and maintain all design documentation: schematics, BOMs, Gerbers, test p

rocedures, and reports

● Work closely with firmware and mechanical teams for full-stack integration

● Coordinate with external vendors for PCB fabrication and assembly

Seeking a hands-on Electronics Design Engineer with experience in:

● Circuit design (analog/digital, power electronics, protection)

● Microcontroller integration

● Schematic and PCB design

● End-to-end hardware development from prototype to production

Key Responsibilities:

Circuit Design & Analysis

● Design analog/digital circuits for embedded systems

● Build custom power supply circuits: buck/boost converters, linear regulators

● Implement protection circuits: overvoltage, reverse polarity, ESD, current limiting

● Perform intelligent component selection (electrical, thermal, cost, lifecycle)

Embedded System Integration

● Interface microcontrollers (ESP32, STM32, etc.) with sensors and peripherals

● Design communication interfaces: SPI, I2C, UART, CAN, RS-485, Ethernet

● Handle signal conditioning and level translation where needed

● Understand signal integrity, grounding, and noise mitigation in mixed-signal designs

Schematic & PCB Development

● Develop production-ready schematics and multi-layer PCB layouts

● Use Altium Designer, KiCAD, or Eagle for design and layout

● Apply layout best practices: power distribution, trace impedance, analog/digital isolation

Prototyping, Testing & Validation

● Perform hardware bring-up and debugging using lab tools (oscilloscope, multimeter, logic analyzer)

● Validate electrical functionality and system-level behavior

● Create and maintain all design documentation: schematics, BOMs, Gerbers, test p

rocedures, and reports

● Work closely with firmware and mechanical teams for full-stack integration

● Coordinate with external vendors for PCB fabrication and assembly

Seeking a hands-on Electronics Design Engineer with experience in:

● Circuit design (analog/digital, power electronics, protection)

● Microcontroller integration

● Schematic and PCB design

● End-to-end hardware development from prototype to production

Key Responsibilities

Circuit Design & Analysis:

● Design analog/digital circuits for embedded systems

● Build custom power supply circuits: buck/boost converters, linear regulators

● Implement protection circuits: overvoltage, reverse polarity, ESD, current limiting

● Perform intelligent component selection (electrical, thermal, cost, lifecycle)

Embedded System Integration:

● Interface microcontrollers (ESP32, STM32, etc.) with sensors and peripherals

● Design communication interfaces: SPI, I2C, UART, CAN, RS-485, Ethernet

● Handle signal conditioning and level translation where needed

● Understand signal integrity, grounding, and noise mitigation in mixed-signal designs

Schematic & PCB Development:

● Develop production-ready schematics and multi-layer PCB layouts● Use Altium Designer, KiCAD, or Eagle for design and layout

● Apply layout best practices: power distribution, trace impedance, analog/digital isolation

P

rototyping, Testing & Validation:●

Perform hardware bring-up and debugging using lab tools (oscilloscope, multimeter,l

ogic analyzer)●

Validate electrical functionality and system-level behavior●

Create and maintain all design documentation: schematics, BOMs, Gerbers, testp

rocedures, and reports●

Work closely with firmware and mechanical teams for full-stack integration●

Coordinate with external vendors for PCB fabrication and assemblyR

equired Qualifications●

Bachelor’s/Master’s in Electronics or Electrical Engineering●

2+ years of experience in circuit and embedded system design●

Proficient in PCB tools (Altium, KiCAD, Eagle)●

Strong in power electronics, analog/digital interfacing, microcontroller-based design●

Deep understanding of component behavior, datasheet interpretation, and electricala

nalysis●

Hands-on with debugging, test equipment, and circuit validation●

Familiar with EMI/EMC, grounding, and layout best practicesP

referred Skills●

Experience in robotics, automation, or IoT●

Experience with external PCB/assembly vendors●

Familiarity with thermal design, power budgeting, and current calculations

Seeking a hands-on Electronics Design Engineer with experience in:

● Circuit design (analog/digital, power electronics, protection)

● Microcontroller integration

● Schematic and PCB design

● End-to-end hardware development from prototype to production

Key Responsibilities:

Circuit Design & Analysis

● Design analog/digital circuits for embedded systems

● Build custom power supply circuits: buck/boost converters, linear regulators

● Implement protection circuits: overvoltage, reverse polarity, ESD, current limiting

● Perform intelligent component selection (electrical, thermal, cost, lifecycle)

Embedded System Integration

● Interface microcontrollers (ESP32, STM32, etc.) with sensors and peripherals

● Design communication interfaces: SPI, I2C, UART, CAN, RS-485, Ethernet

● Handle signal conditioning and level translation where needed

● Understand signal integrity, grounding, and noise mitigation in mixed-signal designs

Schematic & PCB Development

● Develop production-ready schematics and multi-layer PCB layouts

● Use Altium Designer, KiCAD, or Eagle for design and layout

● Apply layout best practices: power distribution, trace impedance, analog/digital isolation

Prototyping, Testing & Validation

● Perform hardware bring-up and debugging using lab tools (oscilloscope, multimeter, logic analyzer)

● Validate electrical functionality and system-level behavior

● Create and maintain all design documentation: schematics, BOMs, Gerbers, test p

rocedures, and reports

● Work closely with firmware and mechanical teams for full-stack integration

● Coordinate with external vendors for PCB fabrication and assembly

Valeo is a tech global company, designing breakthrough solutions to reinvent the mobility. We are an automotive supplier partner to automakers and new mobility actors worldwide. Our vision? Invent a greener and more secured mobility, thanks to solutions focusing on intuitive driving and reducing CO2 emissions. We are leader on our businesses, and recognized as one of the largest global innovative companies.

Mission

Connect Globally with PEM Product group and manage the project technically along with the team for the
activities delivery as per the requirement

Responsibilities

Highlight the main responsibilities

To be the main technical key contact for the project and its design
To be responsible for day to day progress, relevant dashboard update and maintenance of project KPI as
requested
To direct and assist the project level team of people for details design, validation testing