69 Design Teams jobs in India

About Company

Founded in 1956, Dar Al-Handasah (Shair and Partners) is one of the world’s leading international consultancies with five design centers in Beirut, Cairo, London, Pune, and, Amman and 45 regional operation offices in 30 countries throughout the Middle East, Europe, Africa, Asia, and Commonwealth of Independent States (CIS) countries. We provide planning, design, management and consultancy for the world’s most important and exciting projects.

Dar Al-Handasah (Shair and Partners) is the founding company of the Dar Group, an international consortium of professional service firms. Through its 18,000 staff members, Dar Group assists clients in over 100 countries around the world. Dedicated to planning, designing, engineering, and project managing facilities, installations and structures, Dar Group further contributes to the sustainable advance of communities worldwide. Undermentioned shows ranking of Dar Group among the top 225 companies worldwide. For more information, you may visit

Position: HVAC, Plumbing, and Firefighting Design Engineers with experience of Airport Projects

Department: Mechanical

Job Location: Bengaluru & Pune

Experience: 2-15 years

Key Responsibilities:

HVAC Design Engineers:

• Design and optimize HVAC systems for airport terminals, airside buildings, hangars, and other airport facilities.
• Ensure systems meet airport-specific requirements, such as air quality, thermal comfort, and energy efficiency.
• Coordinate with architects, electrical engineers, and other disciplines to integrate HVAC systems seamlessly into the building design.
• Perform system calculations, heat load calculations using tools like HAP (Hourly Analysis Program) to determine heating and cooling requirements for buildings.
• Design HVAC systems including water-cooled and air-cooled chiller plants, Variable Refrigerant flow (VRF) systems, Direct Expansion (DX) systems, etc.
• Selection of equipment such as chillers, cooling towers, VRF systems, fan coil units, air handling units (AHUs), fans, and DX units based on project specifications.
• Calculating ventilation requirements, air balancing, pressurization needs, smoke management systems, pump head calculations, external static pressure, and sizing ducts and pipes.
• Selection of air distribution components like Variable Air Volume (VAV) boxes, grilles, diffusers, louvers, etc.
• Coordinating HVAC designs with other disciplines such as architecture, structural engineering, electrical engineering, etc.
• Applying knowledge of international codes and standards such as ASHRAE, AHRI, CIBSE, HTM, ASPE, etc., in HVAC system design.
• Preparing design reports, specifications, take-off sheets and bill of quantities (BOQ) for HVAC systems.
• Attending meetings with clients, subcontractors, suppliers, and collaborating with various disciplines to ensure coordinated project delivery.
• Active participation in project meetings, providing technical insights, and resolving engineering issues as they arise.
• Proven experience in HVAC system design, heat load calculations, equipment selection, and system optimization.
• In-depth knowledge of HVAC principles, thermodynamics, fluid mechanics, and refrigeration cycles.
• Familiarity with a variety of HVAC equipment, controls, and components.
• Excellent analytical and problem-solving skills to troubleshoot complex HVAC issues.
• Effective communication skills to collaborate with multidisciplinary teams and stakeholders.
• Planning and designing various HVAC systems considering energy efficiency, sustainability, and indoor air quality.
• Proficiency in Building Information Modeling (BIM) tools like Navisworks and BIM Collaboration (BIM 360).

Plumbing Design Engineers:

• Design of plumbing systems for the project including but not limited to domestic water, sanitary, storm water, hot water, gas systems etc.
• Performing appropriate calculations as directed by senior engineer
• Designing and developing plumbing system layouts, including pipe sizing and equipment selection.
• Ensure compliance with local and international standards, codes, and regulations, particularly in high-traffic public spaces.
• Collaborate with other design engineers to ensure all systems function together cohesively.
• Develop detailed design drawings, specifications, and cost estimates for plumbing systems.
• Knowledge of International Plumbing design codes(IPC, UPC, ASPE, CIBSE etc.)
• Knowledge of Revit and ability to work in BIM environment.
• Coordinate and collaborate real time with other in-house disciplines such as electrical, structural, architectural, landscape etc to develop designs.
• Experience with LEED and sustainable design projects
• Ability to work independently and fulfil design requirements for projects.
• Manage and coordinate complex designs/efforts and teams.
• Apply advanced engineering principles to solve technical and coordination issues.

Firefighting Design Engineers:

• Design fire protection and firefighting systems, including sprinklers, fire suppression, for airports.
• Work closely with fire safety consultants and local authorities to ensure compliance with fire safety regulations.
• Provide fire risk assessments, fire safety modeling, and system integration solutions to meet specific project requirements.
• Ensure seamless coordination with other building systems to support airport safety protocols.
• Developing and designing fire suppression and detection systems tailored to meet building codes and specific project requirements.
• Utilizing Revit software to create detailed plans and schematics for fire protection systems.
• Assessing and selecting appropriate firefighting equipment such as fire pumps, sprinkler systems, extinguishers, etc.
• Ensuring compatibility and integration with overall building design and functionality.
• Collaborating closely with architects to integrate fire protection systems seamlessly into building designs.
• Knowledge of fire safety codes, regulations, and industry standards (e.g., NFPA) to ensure all fire protection systems meet local, national, and international safety requirements.
• Master’s or Bachelor’s degree in Mechanical Engineering or Fire Protection Engineering.
• Professional certifications such as Certified Fire Protection Specialist (CFPS) are preferred.
• Demonstrating a strong knowledge of fire protection principles, codes, and standards relevant to the industry.
• Demonstrating excellent analytical, problem-solving, and communication skills to effectively convey technical information to diverse stakeholders.
• Ability to work collaboratively within multidisciplinary teams and under pressure during emergencies.
• Proficiency in Building Information Modeling (BIM) tools like Navisworks and BIM Collaboration (BIM 360).

Qualifications:

• Master’s or Bachelor’s degree in mechanical engineering
• Minimum of 5 years of experience in HVAC, plumbing, or firefighting system design with a focus on airport or large-scale infrastructure projects.
• In-depth knowledge of international airport design standards and codes (e.g., NFPA, ASHRAE, local fire codes).
• Proficiency in design software such as Revit, Navisworks, AutoCAD, Elite, and other industry-standard tools.
• Experience with BIM (Building Information Modeling) is a plus.
• Strong analytical and problem-solving skills.
• Excellent written and verbal communication skills.
• Ability to work collaboratively within multidisciplinary teams to deliver complex projects on time and within budget
• Strong project management and coordination skills.
• Knowledge of Building Management Systems (BMS) and energy-efficient solutions

• Perform structural analysis and design for various types of bridges (e.g., beam, arch, suspension, cable-stayed).
• Develop detailed design calculations, drawings, and specifications using industry-standard software.
• Conduct feasibility studies and preliminary design options for bridge projects.
• Ensure designs meet all safety, structural integrity, and performance requirements as per relevant codes (e.g., IRC, AASHTO).
• Collaborate with project managers, other engineering disciplines, and clients to refine designs and address technical challenges.
• Review shop drawings and construction submittals from contractors for compliance with design intent.
• Provide technical support during the construction phase, responding to RFIs and resolving site issues.
• Stay updated with the latest advancements in structural engineering, materials, and design methodologies.
• Mentor junior engineers and contribute to the team's knowledge base.
• Participate in design review meetings and present technical findings.

• Bachelor's or Master's degree in Civil/Structural Engineering.
• Minimum of 5 years of progressive experience in structural design, with a significant focus on bridge engineering.
• Proficiency in structural analysis and design software such as STAAD.Pro, SAP2000, CSiBridge, MIDAS Civil, etc.
• Strong knowledge of relevant Indian and international bridge design codes and standards.
• Excellent analytical and problem-solving skills.
• Ability to work independently and collaboratively in a remote team environment.
• Effective communication skills, both written and verbal.
• Professional Engineer (PE) certification or equivalent is highly desirable.

• Perform structural analysis and design for buildings, bridges, and other infrastructure projects.
• Develop detailed structural drawings, including plans, elevations, sections, and details, using CAD software.
• Prepare technical specifications and Bill of Quantities (BOQ) for structural elements.
• Ensure designs comply with relevant Indian Standards (IS codes) and other building regulations.
• Conduct site inspections and assessments to gather information for design.
• Collaborate with architects, project managers, and other engineers to ensure integrated design solutions.
• Review shop drawings and respond to site queries during construction.
• Utilize structural analysis software (e.g., STAAD.Pro, ETABS, SAP2000) for design calculations.
• Perform material take-offs and assist in cost estimation for structural works.
• Maintain organized project files and documentation.
• Assist in the preparation of project proposals and presentations.
• Stay updated with the latest advancements in structural engineering techniques and software.
• Ensure quality and accuracy in all design deliverables.

• Bachelor's degree in Civil Engineering, with a specialization in Structural Engineering.
• Minimum of 4-6 years of experience in structural design.
• Proficiency in structural analysis and design software.
• Strong knowledge of reinforced concrete and steel structures design.
• Familiarity with Indian Standards (IS codes) for structural design.
• Excellent CAD skills for creating detailed drawings.
• Good communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Strong analytical and problem-solving abilities.
• Attention to detail and commitment to producing high-quality work.

• Conceptualize, design, and analyze bridges for various transportation projects.
• Prepare detailed design calculations, drawings, and specifications for bridge construction.
• Conduct structural analysis using advanced software for load, stress, and deflection calculations.
• Ensure designs comply with relevant Indian Road Congress (IRC) codes and other relevant standards.
• Perform site inspections and provide technical support during the construction phase.
• Collaborate with project teams, clients, and regulatory authorities.
• Review and approve shop drawings and material submittals.
• Assess existing bridges for rehabilitation or strengthening needs.
• Stay updated with the latest advancements in bridge engineering technology and practices.
• Mentor junior engineers and contribute to the team's technical growth.

• Bachelor's or Master's degree in Civil Engineering with a specialization in Structural or Bridge Engineering.
• Minimum of 7 years of experience in the design of bridges.
• Proficiency in bridge design software (e.g., MIDAS Civil, CSiBridge, STAAD.Pro).
• Strong understanding of bridge construction techniques and materials.
• In-depth knowledge of IRC codes and relevant structural design standards.
• Excellent analytical, problem-solving, and communication skills.
• Ability to work collaboratively in a team environment.
• Experience with seismic analysis and design for bridges is advantageous.
• Professional Engineer (PE) certification or equivalent is a plus.

• Design and develop detailed engineering plans, specifications, and calculations for infrastructure projects (e.g., roads, highways, water supply, wastewater systems, drainage).
• Utilize Civil 3D, AutoCAD, and other relevant design software for drafting and modeling.
• Conduct site investigations and feasibility studies for new projects.
• Ensure designs comply with relevant codes, standards, regulations, and best practices.
• Prepare technical reports, project proposals, and cost estimates.
• Collaborate with project managers, architects, surveyors, and other engineering disciplines.
• Review contractor submittals and respond to Requests for Information (RFIs).
• Oversee the construction phase by providing technical support and site inspections as needed.
• Perform quality control checks on design documents and calculations.
• Manage project timelines and deliverables for assigned tasks.
• Stay current with advancements in civil engineering technologies and methodologies.
• Contribute to the development of design standards and procedures.

• Bachelor's degree in Civil Engineering from an accredited institution.
• Minimum of 6 years of experience in civil infrastructure design.
• Professional Engineer (PE) license or eligibility to obtain one is highly desirable.
• Proficiency in Civil 3D, AutoCAD, and other relevant design and analysis software.
• Strong understanding of structural analysis, soil mechanics, hydraulics, and transportation engineering principles.
• Experience in site development, grading, drainage, and utility design.
• Excellent analytical, problem-solving, and project management skills.
• Strong written and verbal communication skills, with the ability to present technical information clearly.
• Ability to work independently and manage multiple projects effectively in a remote setting.
• Experience with project bidding and contract administration is a plus.
• Commitment to safety and quality in design.

• Design and develop civil engineering plans for infrastructure projects, including roads, bridges, drainage systems, and utility networks.
• Perform structural analysis, load calculations, and geotechnical assessments using relevant software.
• Ensure designs comply with local, national, and international engineering codes, standards, and regulations.
• Prepare detailed technical drawings, specifications, and construction documents using CAD and other design software.
• Collaborate with project teams to define project scope, objectives, and deliverables.
• Conduct site investigations and feasibility studies for proposed projects.
• Review shop drawings and provide technical support during the construction phase.
• Manage project design schedules and ensure timely delivery of design packages.
• Assess environmental impacts and propose mitigation strategies for infrastructure development.
• Liaise with government agencies, permitting authorities, and stakeholders.
• Mentor junior engineers and provide technical guidance.
• Stay current with advancements in civil engineering technologies and design methodologies.

• Bachelor's or Master's degree in Civil Engineering.
• Minimum of 5 years of experience in civil design engineering, with a focus on infrastructure projects.
• Proven experience in designing roads, bridges, water/wastewater systems, or site development.
• Proficiency in civil engineering design software such as AutoCAD, Civil 3D, Revit, STAAD.Pro, or similar.
• Strong understanding of structural analysis, geotechnical principles, and hydraulics.
• Knowledge of relevant building codes, zoning laws, and environmental regulations.
• Excellent analytical, problem-solving, and critical thinking skills.
• Strong written and verbal communication skills.
• Ability to work effectively in a team environment and manage multiple projects simultaneously.
• Professional Engineer (PE) certification is a plus.

• Develop detailed designs and drawings for infrastructure projects.
• Perform structural analysis and calculations using engineering software.
• Ensure designs comply with relevant codes, standards, and regulations.
• Collaborate with project teams, including project managers and construction engineers.
• Conduct site investigations and prepare reports.
• Prepare technical specifications and Bills of Quantities (BoQ).
• Review and approve shop drawings and construction submittals.
• Provide technical support during the construction phase.
• Assist in the tendering process by preparing design documentation.
• Stay updated with the latest engineering technologies and practices.

• Bachelor's or Master's degree in Civil Engineering.
• Minimum of 4-6 years of experience in civil design engineering.
• Proficiency in AutoCAD, Civil 3D, or similar CAD software.
• Experience with structural analysis software (e.g., STAAD.Pro, ETABS) is desirable.
• Strong knowledge of civil engineering principles and construction practices.
• Excellent problem-solving and analytical skills.
• Good communication and teamwork abilities.
• Ability to manage design tasks and meet project deadlines.
• Understanding of local building codes and regulations.

About Company

Founded in 1956, Dar Al-Handasah (Shair and Partners) is one of the world’s leading international consultancies with five design centers in Beirut, Cairo, London, Pune, and, Amman and 45 regional operation offices in 30 countries throughout the Middle East, Europe, Africa, Asia, and Commonwealth of Independent States (CIS) countries. We provide planning, design, management and consultancy for the world’s most important and exciting projects.

Dar Al-Handasah (Shair and Partners) is the founding company of the Dar Group, an international consortium of professional service firms. Through its 18,000 staff members, Dar Group assists clients in over 100 countries around the world. Dedicated to planning, designing, engineering, and project managing facilities, installations and structures, Dar Group further contributes to the sustainable advance of communities worldwide. Undermentioned shows ranking of Dar Group among the top 225 companies worldwide. For more information, you may visit

Position: HVAC, Plumbing, and Firefighting Design Engineers with experience of Airport Projects

Department: Mechanical

Job Location: Bengaluru & Pune

Experience: 2-15 years

Key Responsibilities:

HVAC Design Engineers:

• Design and optimize HVAC systems for airport terminals, airside buildings, hangars, and other airport facilities.
• Ensure systems meet airport-specific requirements, such as air quality, thermal comfort, and energy efficiency.
• Coordinate with architects, electrical engineers, and other disciplines to integrate HVAC systems seamlessly into the building design.
• Perform system calculations, heat load calculations using tools like HAP (Hourly Analysis Program) to determine heating and cooling requirements for buildings.
• Design HVAC systems including water-cooled and air-cooled chiller plants, Variable Refrigerant flow (VRF) systems, Direct Expansion (DX) systems, etc.
• Selection of equipment such as chillers, cooling towers, VRF systems, fan coil units, air handling units (AHUs), fans, and DX units based on project specifications.
• Calculating ventilation requirements, air balancing, pressurization needs, smoke management systems, pump head calculations, external static pressure, and sizing ducts and pipes.
• Selection of air distribution components like Variable Air Volume (VAV) boxes, grilles, diffusers, louvers, etc.
• Coordinating HVAC designs with other disciplines such as architecture, structural engineering, electrical engineering, etc.
• Applying knowledge of international codes and standards such as ASHRAE, AHRI, CIBSE, HTM, ASPE, etc., in HVAC system design.
• Preparing design reports, specifications, take-off sheets and bill of quantities (BOQ) for HVAC systems.
• Attending meetings with clients, subcontractors, suppliers, and collaborating with various disciplines to ensure coordinated project delivery.
• Active participation in project meetings, providing technical insights, and resolving engineering issues as they arise.
• Proven experience in HVAC system design, heat load calculations, equipment selection, and system optimization.
• In-depth knowledge of HVAC principles, thermodynamics, fluid mechanics, and refrigeration cycles.
• Familiarity with a variety of HVAC equipment, controls, and components.
• Excellent analytical and problem-solving skills to troubleshoot complex HVAC issues.
• Effective communication skills to collaborate with multidisciplinary teams and stakeholders.
• Planning and designing various HVAC systems considering energy efficiency, sustainability, and indoor air quality.
• Proficiency in Building Information Modeling (BIM) tools like Navisworks and BIM Collaboration (BIM 360).

Plumbing Design Engineers:

• Design of plumbing systems for the project including but not limited to domestic water, sanitary, storm water, hot water, gas systems etc.
• Performing appropriate calculations as directed by senior engineer
• Designing and developing plumbing system layouts, including pipe sizing and equipment selection.
• Ensure compliance with local and international standards, codes, and regulations, particularly in high-traffic public spaces.
• Collaborate with other design engineers to ensure all systems function together cohesively.
• Develop detailed design drawings, specifications, and cost estimates for plumbing systems.
• Knowledge of International Plumbing design codes(IPC, UPC, ASPE, CIBSE etc.)
• Knowledge of Revit and ability to work in BIM environment.
• Coordinate and collaborate real time with other in-house disciplines such as electrical, structural, architectural, landscape etc to develop designs.
• Experience with LEED and sustainable design projects
• Ability to work independently and fulfil design requirements for projects.
• Manage and coordinate complex designs/efforts and teams.
• Apply advanced engineering principles to solve technical and coordination issues.

Firefighting Design Engineers:

• Design fire protection and firefighting systems, including sprinklers, fire suppression, for airports.
• Work closely with fire safety consultants and local authorities to ensure compliance with fire safety regulations.
• Provide fire risk assessments, fire safety modeling, and system integration solutions to meet specific project requirements.
• Ensure seamless coordination with other building systems to support airport safety protocols.
• Developing and designing fire suppression and detection systems tailored to meet building codes and specific project requirements.
• Utilizing Revit software to create detailed plans and schematics for fire protection systems.
• Assessing and selecting appropriate firefighting equipment such as fire pumps, sprinkler systems, extinguishers, etc.
• Ensuring compatibility and integration with overall building design and functionality.
• Collaborating closely with architects to integrate fire protection systems seamlessly into building designs.
• Knowledge of fire safety codes, regulations, and industry standards (e.g., NFPA) to ensure all fire protection systems meet local, national, and international safety requirements.
• Master’s or Bachelor’s degree in Mechanical Engineering or Fire Protection Engineering.
• Professional certifications such as Certified Fire Protection Specialist (CFPS) are preferred.
• Demonstrating a strong knowledge of fire protection principles, codes, and standards relevant to the industry.
• Demonstrating excellent analytical, problem-solving, and communication skills to effectively convey technical information to diverse stakeholders.
• Ability to work collaboratively within multidisciplinary teams and under pressure during emergencies.
• Proficiency in Building Information Modeling (BIM) tools like Navisworks and BIM Collaboration (BIM 360).

Qualifications:

• Master’s or Bachelor’s degree in mechanical engineering
• Minimum of 5 years of experience in HVAC, plumbing, or firefighting system design with a focus on airport or large-scale infrastructure projects.
• In-depth knowledge of international airport design standards and codes (e.g., NFPA, ASHRAE, local fire codes).
• Proficiency in design software such as Revit, Navisworks, AutoCAD, Elite, and other industry-standard tools.
• Experience with BIM (Building Information Modeling) is a plus.
• Strong analytical and problem-solving skills.
• Excellent written and verbal communication skills.
• Ability to work collaboratively within multidisciplinary teams to deliver complex projects on time and within budget
• Strong project management and coordination skills.
• Knowledge of Building Management Systems (BMS) and energy-efficient solutions