5,875 Electronics Hardware Engineer jobs in India

About SLTL Group,

A renowned name, Sahajanand Laser Technology Ltd. Situated at Gandhinagar, Gujarat is a Pioneer in the manufacturing of laser marking & and engraving, laser cutting, laser welding, and solar cell scribing / micro-machining systems in the industrial segment. Fiber laser marking system with automation like Laser Marking for Bearing, Laser Marking for Piston rings, Laser Marking for Valves, Laser Marking for Nozzles, and Laser Marking for jewelry.

Kindly go through our websites mentioned below for further details.

Website:

Position Summary

Hardware Engineer with 3–7 years of experience in designing both electronics and power electronics hardware. The ideal candidate will be involved in the development of analog/digital circuitry, power converters, PCB design, and system integration for high-performance embedded and power systems. The role requires a strong understanding of circuit design, component selection, and compliance with industry standards for electrical safety and EMC.

Job Description

Designation - Engineer/Sr Engineer

Department - Electronics Design (R&D)

Experience - 3 to 7 Years

Location - Gandhinagar, Gujarat.

Qualification - B.E./B.Tech or M.E./M.Tech in Electronics & Communication Engineering, or Power Electronics

Roles and responsibilities

• Design analog and digital circuits including signal conditioning, sensor interfaces, and control logic.
• Work on microcontroller/microprocessor-based hardware (e.g., STM32, TI, NXP, Atmel).
• Select components, design schematics, and review PCB layouts using tools like Altium, KiCAD, or OrCAD.
• Ensure signal integrity, thermal stability, and EMI robustness in circuit design.
• Develop DC-DC and DC-AC power converters, gate drivers, and protection circuits.
• Design and optimize motor drivers, or battery management circuits.
• Perform power and thermal calculations, simulate circuits (e.g., LTSpice, PLECS, PSIM) and conduct derating analysis.
• Conduct board-level and system-level testing using lab instruments (oscilloscopes, power analyzers, logic analyzers.
• Work closely with firmware, mechanical, and system teams for hardware integration.
• Maintain hardware documentation, BOMs, and version control.

About SLTL Group,

A renowned name, Sahajanand Laser Technology Ltd. Situated at Gandhinagar, Gujarat is a Pioneer in the manufacturing of laser marking & and engraving, laser cutting, laser welding, and solar cell scribing / micro-machining systems in the industrial segment. Fiber laser marking system with automation like Laser Marking for Bearing, Laser Marking for Piston rings, Laser Marking for Valves, Laser Marking for Nozzles, and Laser Marking for jewelry.

Kindly go through our websites mentioned below for further details.

Website:

Position Summary

Hardware Engineer with 3-7 years of experience in designing both electronics and power electronics hardware. The ideal candidate will be involved in the development of analog/digital circuitry, power converters, PCB design, and system integration for high-performance embedded and power systems. The role requires a strong understanding of circuit design, component selection, and compliance with industry standards for electrical safety and EMC.

Job Description

Designation - Engineer/Sr Engineer

Department - Electronics Design (R&D)

Experience - 3 to 7 Years

Location - Gandhinagar, Gujarat.

Qualification - B.E./B.Tech or M.E./M.Tech in Electronics & Communication Engineering, or Power Electronics

Roles and responsibilities

• Design analog and digital circuits including signal conditioning, sensor interfaces, and control logic.
• Work on microcontroller/microprocessor-based hardware (e.g., STM32, TI, NXP, Atmel).
• Select components, design schematics, and review PCB layouts using tools like Altium, KiCAD, or OrCAD.
• Ensure signal integrity, thermal stability, and EMI robustness in circuit design.
• Develop DC-DC and DC-AC power converters, gate drivers, and protection circuits.
• Design and optimize motor drivers, or battery management circuits.
• Perform power and thermal calculations, simulate circuits (e.g., LTSpice, PLECS, PSIM) and conduct derating analysis.
• Conduct board-level and system-level testing using lab instruments (oscilloscopes, power analyzers, logic analyzers.
• Work closely with firmware, mechanical, and system teams for hardware integration.
• Maintain hardware documentation, BOMs, and version control.

About SLTL Group,

A renowned name, Sahajanand Laser Technology Ltd. Situated at Gandhinagar, Gujarat is a Pioneer in the manufacturing of laser marking & and engraving, laser cutting, laser welding, and solar cell scribing / micro-machining systems in the industrial segment. Fiber laser marking system with automation like Laser Marking for Bearing, Laser Marking for Piston rings, Laser Marking for Valves, Laser Marking for Nozzles, and Laser Marking for jewelry.

Kindly go through our websites mentioned below for further details.

Website:

Position Summary

Hardware Engineer with 3-7 years of experience in designing both electronics and power electronics hardware. The ideal candidate will be involved in the development of analog/digital circuitry, power converters, PCB design, and system integration for high-performance embedded and power systems. The role requires a strong understanding of circuit design, component selection, and compliance with industry standards for electrical safety and EMC.

Job Description

Designation - Engineer/Sr Engineer

Department - Electronics Design (R&D)

Experience - 3 to 7 Years

Location - Gandhinagar, Gujarat.

Qualification - B.E./B.Tech or M.E./M.Tech in Electronics & Communication Engineering, or Power Electronics

Roles and responsibilities

• Design analog and digital circuits including signal conditioning, sensor interfaces, and control logic.
• Work on microcontroller/microprocessor-based hardware (e.g., STM32, TI, NXP, Atmel).
• Select components, design schematics, and review PCB layouts using tools like Altium, KiCAD, or OrCAD.
• Ensure signal integrity, thermal stability, and EMI robustness in circuit design.
• Develop DC-DC and DC-AC power converters, gate drivers, and protection circuits.
• Design and optimize motor drivers, or battery management circuits.
• Perform power and thermal calculations, simulate circuits (e.g., LTSpice, PLECS, PSIM) and conduct derating analysis.
• Conduct board-level and system-level testing using lab instruments (oscilloscopes, power analyzers, logic analyzers.
• Work closely with firmware, mechanical, and system teams for hardware integration.
• Maintain hardware documentation, BOMs, and version control.

About SLTL Group,

A renowned name, Sahajanand Laser Technology Ltd. Situated at Gandhinagar, Gujarat is a Pioneer in the manufacturing of laser marking & and engraving, laser cutting, laser welding, and solar cell scribing / micro-machining systems in the industrial segment. Fiber laser marking system with automation like Laser Marking for Bearing, Laser Marking for Piston rings, Laser Marking for Valves, Laser Marking for Nozzles, and Laser Marking for jewelry.

Kindly go through our websites mentioned below for further details.

Website:

Position Summary

Hardware Engineer with 3–7 years of experience in designing both electronics and power electronics hardware. The ideal candidate will be involved in the development of analog/digital circuitry, power converters, PCB design, and system integration for high-performance embedded and power systems. The role requires a strong understanding of circuit design, component selection, and compliance with industry standards for electrical safety and EMC.

Job Description

Designation - Engineer/Sr Engineer

Department - Electronics Design (R&D)

Experience - 3 to 7 Years

Location - Gandhinagar, Gujarat.

Qualification - B.E./B.Tech or M.E./M.Tech in Electronics & Communication Engineering, or Power Electronics

Roles and responsibilities

• Design analog and digital circuits including signal conditioning, sensor interfaces, and control logic.
• Work on microcontroller/microprocessor-based hardware (e.g., STM32, TI, NXP, Atmel).
• Select components, design schematics, and review PCB layouts using tools like Altium, KiCAD, or OrCAD.
• Ensure signal integrity, thermal stability, and EMI robustness in circuit design.
• Develop DC-DC and DC-AC power converters, gate drivers, and protection circuits.
• Design and optimize motor drivers, or battery management circuits.
• Perform power and thermal calculations, simulate circuits (e.g., LTSpice, PLECS, PSIM) and conduct derating analysis.
• Conduct board-level and system-level testing using lab instruments (oscilloscopes, power analyzers, logic analyzers.
• Work closely with firmware, mechanical, and system teams for hardware integration.
• Maintain hardware documentation, BOMs, and version control.

About SLTL Group,

A renowned name, Sahajanand Laser Technology Ltd. Situated at Gandhinagar, Gujarat is a Pioneer in the manufacturing of laser marking & and engraving, laser cutting, laser welding, and solar cell scribing / micro-machining systems in the industrial segment. Fiber laser marking system with automation like Laser Marking for Bearing, Laser Marking for Piston rings, Laser Marking for Valves, Laser Marking for Nozzles, and Laser Marking for jewelry.

Kindly go through our websites mentioned below for further details.

Website:

Position Summary

Hardware Engineer with 3–7 years of experience in designing both electronics and power electronics hardware. The ideal candidate will be involved in the development of analog/digital circuitry, power converters, PCB design, and system integration for high-performance embedded and power systems. The role requires a strong understanding of circuit design, component selection, and compliance with industry standards for electrical safety and EMC.

Job Description

Designation - Engineer/Sr Engineer

Department - Electronics Design (R&D)

Experience - 3 to 7 Years

Location - Gandhinagar, Gujarat.

Qualification - B.E./B.Tech or M.E./M.Tech in Electronics & Communication Engineering, or Power Electronics

Roles and responsibilities

• Design analog and digital circuits including signal conditioning, sensor interfaces, and control logic.
• Work on microcontroller/microprocessor-based hardware (e.g., STM32, TI, NXP, Atmel).
• Select components, design schematics, and review PCB layouts using tools like Altium, KiCAD, or OrCAD.
• Ensure signal integrity, thermal stability, and EMI robustness in circuit design.
• Develop DC-DC and DC-AC power converters, gate drivers, and protection circuits.
• Design and optimize motor drivers, or battery management circuits.
• Perform power and thermal calculations, simulate circuits (e.g., LTSpice, PLECS, PSIM) and conduct derating analysis.
• Conduct board-level and system-level testing using lab instruments (oscilloscopes, power analyzers, logic analyzers.
• Work closely with firmware, mechanical, and system teams for hardware integration.
• Maintain hardware documentation, BOMs, and version control.

About SLTL Group,

A renowned name, Sahajanand Laser Technology Ltd. Situated at Gandhinagar, Gujarat is a Pioneer in the manufacturing of laser marking & and engraving, laser cutting, laser welding, and solar cell scribing / micro-machining systems in the industrial segment. Fiber laser marking system with automation like Laser Marking for Bearing, Laser Marking for Piston rings, Laser Marking for Valves, Laser Marking for Nozzles, and Laser Marking for jewelry.

Kindly go through our websites mentioned below for further details.

Website:

Position Summary

Hardware Engineer with 3–7 years of experience in designing both electronics and power electronics hardware. The ideal candidate will be involved in the development of analog/digital circuitry, power converters, PCB design, and system integration for high-performance embedded and power systems. The role requires a strong understanding of circuit design, component selection, and compliance with industry standards for electrical safety and EMC.

Job Description

Designation - Engineer/Sr Engineer

Department - Electronics Design (R&D)

Experience - 3 to 7 Years

Location - Gandhinagar, Gujarat.

Qualification - B.E./B.Tech or M.E./M.Tech in Electronics & Communication Engineering, or Power Electronics

Roles and responsibilities

• Design analog and digital circuits including signal conditioning, sensor interfaces, and control logic.
• Work on microcontroller/microprocessor-based hardware (e.g., STM32, TI, NXP, Atmel).
• Select components, design schematics, and review PCB layouts using tools like Altium, KiCAD, or OrCAD.
• Ensure signal integrity, thermal stability, and EMI robustness in circuit design.
• Develop DC-DC and DC-AC power converters, gate drivers, and protection circuits.
• Design and optimize motor drivers, or battery management circuits.
• Perform power and thermal calculations, simulate circuits (e.g., LTSpice, PLECS, PSIM) and conduct derating analysis.
• Conduct board-level and system-level testing using lab instruments (oscilloscopes, power analyzers, logic analyzers.
• Work closely with firmware, mechanical, and system teams for hardware integration.
• Maintain hardware documentation, BOMs, and version control.