332 Fire Protection jobs in India

Job Profile for Position- Design-Generalist-Mechanical & Business unit - Power

First Class Graduate /Postgraduate in Mechanical Engineering.

Industry: Power plants (thermal, nuclear), Substation, Steel plant, Oil & Gas, chemical plant

Key Responsibilities:

Responsible as Lead Fire Protection Design Engineer

What are the main responsibilities for this individual (i.e., reasons we need this person)?

1. To prepare design basis report and estimate fire water pump sizing and dead storage of complete fire protection system.

2. To estimate the various types of Fire protection systems for various areas of the project under consideration.

3. To carry out equipment sizing, pipe sizing, prepare process flow diagram, P&ID’s.

4. To carry out hydraulic calculations using various software such as Pipenet. Hydraulic calculation for entire hydrant/ spray network/ spray/sprinkler/ gas protection system, study of fire hazard case scenarios.

5. To prepare detailed piping fire hydrant, spray, sprinkler piping layouts, foam system, gas protection system layouts FM200/Novec1230/CO2/Inergen/Argonite/Argon), isometrics layout drawings and construction/erection drawings

6. Estimate detailed bill of materials for fire protection equipment, piping, supports, paints, etc for procurement.

7. Prepare technical specifications, RFQ, technical datasheets for entire fire protection system.

8. To carry out bid meetings with Client & Vendor, bid analysis, technical bid evaluation report with respect to entire Fire protection systems.

9. Vendor drawing reviews for entire fire protection systems.

10. Carry out cost estimates, manhours & schedule planning activities for the project.

11. Able to do complete detailed engineering and issue drawings for construction as per NFPA, BIS, TAC, NBC, OISD, Local regulations. Getting approval from Client/ Local approving authorities. Value addition in design engineering to optimize cost.

12. Site field engineering support for erection and commissioning.

Key Skills Required:

What are the “must-have” skill sets, without which a candidate would not be considered and should not be submitted?

1. NFPA standards and detailed vendor design engineering as per NFPA is essential. FM Global standards detailed design is added advantage.

2. Work experience of entire fire protection system in power plant (thermal coal/gas/solar/substations) domestic & international is a must. Oil & gas industries experience is added advantage. Work experience in design of fire protection of transformers, cable galleries, coal conveyors, workshops, warehouse, control rooms, admin bldg, fuel oil tanks, and boilers is a must.

3. Work experience in infra projects like residential bldg, hospitals, shopping malls, commercial bldgs, hotels, etc will not be counted in relevant experience.

4. Knowledge of passive fire system, fire risk evaluation assessment is desired.

5. Good verbal and written communication skills, dynamic nature, good coordination skills with interdepartmental and with Client.

6. Familiarity with applicable Indian/International codes is a must.

7. Good decision-making capabilities & communication skills is a must.

8. Familiarization of fire alarm and detection system.

9. Deliver quality, error free documents/ drawings, take ownership of deliverable and maintain project schedule timeliness is a must.

10. Working knowledge prepare drawings on 3D platforms like PDS/PDMS/SP3D/SPPID is added advantage.

11. Ready to relocate to Project sites/ Client’s office (India/Global) on deputation (short term/long term) is a must.

What are key words you would expect to see on a resume?

NFPA, Fire protection system, Power Plant, Oil & Gas plant, Detailed engineering, Isometrics, BOQ, 3D software, Inert gas system, Pipenet, Fire risk assessment

Technical Competencies *

Acceptable Rating *

Basic engg. – basic study/concept note, System philosophy

Preparation of specifications/datasheets, TBE & contract

Hydraulic calculation on pipenet software, AutoCAD usage

Detailed Engg. - Preparation of detailed piping layout, isometrics, BOQs, 3D engineering. etc.

Vendor drawing reviews, coordination, sire support, etc

Job Profile for Position- Design-Generalist-Mechanical & Business unit - PowerFirst Class Graduate /Postgraduate in Mechanical Engineering. Industry: Power plants (thermal, nuclear), Substation, Steel plant, Oil & Gas, chemical plantKey Responsibilities:Responsible as Lead Fire Protection Design EngineerWhat are the main responsibilities for this individual (i.e., reasons we need this person)?1. To prepare design basis report and estimate fire water pump sizing and dead storage of complete fire protection system. 2. To estimate the various types of Fire protection systems for various areas of the project under consideration. 3. To carry out equipment sizing, pipe sizing, prepare process flow diagram, P&ID’s. 4. To carry out hydraulic calculations using various software such as Pipenet. Hydraulic calculation for entire hydrant/ spray network/ spray/sprinkler/ gas protection system, study of fire hazard case scenarios. 5. To prepare detailed piping fire hydrant, spray, sprinkler piping layouts, foam system, gas protection system layouts FM200/Novec1230/CO2/Inergen/Argonite/Argon), isometrics layout drawings and construction/erection drawings 6. Estimate detailed bill of materials for fire protection equipment, piping, supports, paints, etc for procurement. 7. Prepare technical specifications, RFQ, technical datasheets for entire fire protection system. 8. To carry out bid meetings with Client & Vendor, bid analysis, technical bid evaluation report with respect to entire Fire protection systems. 9. Vendor drawing reviews for entire fire protection systems. 10. Carry out cost estimates, manhours & schedule planning activities for the project. 11. Able to do complete detailed engineering and issue drawings for construction as per NFPA, BIS, TAC, NBC, OISD, Local regulations. Getting approval from Client/ Local approving authorities. Value addition in design engineering to optimize cost. 12. Site field engineering support for erection and commissioning.Key Skills Required:What are the “must-have” skill sets, without which a candidate would not be considered and should not be submitted?1. NFPA standards and detailed vendor design engineering as per NFPA is essential. FM Global standards detailed design is added advantage. 2. Work experience of entire fire protection system in power plant (thermal coal/gas/solar/substations) domestic & international is a must. Oil & gas industries experience is added advantage. Work experience in design of fire protection of transformers, cable galleries, coal conveyors, workshops, warehouse, control rooms, admin bldg, fuel oil tanks, and boilers is a must. 3. Work experience in infra projects like residential bldg, hospitals, shopping malls, commercial bldgs, hotels, etc will not be counted in relevant experience. 4. Knowledge of passive fire system, fire risk evaluation assessment is desired. 5. Good verbal and written communication skills, dynamic nature, good coordination skills with interdepartmental and with Client. 6. Familiarity with applicable Indian/International codes is a must. 7. Good decision-making capabilities & communication skills is a must. 8. Familiarization of fire alarm and detection system. 9. Deliver quality, error free documents/ drawings, take ownership of deliverable and maintain project schedule timeliness is a must. 10. Working knowledge prepare drawings on 3 D platforms like PDS/PDMS/SP3 D/SPPID is added advantage. 11. Ready to relocate to Project sites/ Client’s office (India/Global) on deputation (short term/long term) is a must. What are key words you would expect to see on a resume?NFPA, Fire protection system, Power Plant, Oil & Gas plant, Detailed engineering, Isometrics, BOQ, 3 D software, Inert gas system, Pipenet, Fire risk assessmentTechnical Competencies *Acceptable Rating *Basic engg. – basic study/concept note, System philosophyPreparation of specifications/datasheets, TBE & contractHydraulic calculation on pipenet software, Auto CAD usageDetailed Engg. - Preparation of detailed piping layout, isometrics, BOQs, 3 D engineering. etc.Vendor drawing reviews, coordination, sire support, etc

Job Profile for Position- Design-Generalist-Mechanical & Business unit - Power

First Class Graduate /Postgraduate in Mechanical Engineering.

Industry: Power plants (thermal, nuclear), Substation, Steel plant, Oil & Gas, chemical plant

Key Responsibilities:

Responsible as Lead Fire Protection Design Engineer

What are the main responsibilities for this individual (i.e., reasons we need this person)?

1. To prepare design basis report and estimate fire water pump sizing and dead storage of complete fire protection system.

2. To estimate the various types of Fire protection systems for various areas of the project under consideration.

3. To carry out equipment sizing, pipe sizing, prepare process flow diagram, P&ID’s.

4. To carry out hydraulic calculations using various software such as Pipenet. Hydraulic calculation for entire hydrant/ spray network/ spray/sprinkler/ gas protection system, study of fire hazard case scenarios.

5. To prepare detailed piping fire hydrant, spray, sprinkler piping layouts, foam system, gas protection system layouts FM200/Novec1230/CO2/Inergen/Argonite/Argon), isometrics layout drawings and construction/erection drawings

6. Estimate detailed bill of materials for fire protection equipment, piping, supports, paints, etc for procurement.

7. Prepare technical specifications, RFQ, technical datasheets for entire fire protection system.

8. To carry out bid meetings with Client & Vendor, bid analysis, technical bid evaluation report with respect to entire Fire protection systems.

9. Vendor drawing reviews for entire fire protection systems.

10. Carry out cost estimates, manhours & schedule planning activities for the project.

11. Able to do complete detailed engineering and issue drawings for construction as per NFPA, BIS, TAC, NBC, OISD, Local regulations. Getting approval from Client/ Local approving authorities. Value addition in design engineering to optimize cost.

12. Site field engineering support for erection and commissioning.

Key Skills Required:

What are the “must-have” skill sets, without which a candidate would not be considered and should not be submitted?

1. NFPA standards and detailed vendor design engineering as per NFPA is essential. FM Global standards detailed design is added advantage.

2. Work experience of entire fire protection system in power plant (thermal coal/gas/solar/substations) domestic & international is a must. Oil & gas industries experience is added advantage. Work experience in design of fire protection of transformers, cable galleries, coal conveyors, workshops, warehouse, control rooms, admin bldg, fuel oil tanks, and boilers is a must.

3. Work experience in infra projects like residential bldg, hospitals, shopping malls, commercial bldgs, hotels, etc will not be counted in relevant experience.

4. Knowledge of passive fire system, fire risk evaluation assessment is desired.

5. Good verbal and written communication skills, dynamic nature, good coordination skills with interdepartmental and with Client.

6. Familiarity with applicable Indian/International codes is a must.

7. Good decision-making capabilities & communication skills is a must.

8. Familiarization of fire alarm and detection system.

9. Deliver quality, error free documents/ drawings, take ownership of deliverable and maintain project schedule timeliness is a must.

10. Working knowledge prepare drawings on 3D platforms like PDS/PDMS/SP3D/SPPID is added advantage.

11. Ready to relocate to Project sites/ Client’s office (India/Global) on deputation (short term/long term) is a must.

What are key words you would expect to see on a resume?

NFPA, Fire protection system, Power Plant, Oil & Gas plant, Detailed engineering, Isometrics, BOQ, 3D software, Inert gas system, Pipenet, Fire risk assessment

Technical Competencies *

Acceptable Rating *

Basic engg. – basic study/concept note, System philosophy

Preparation of specifications/datasheets, TBE & contract

Hydraulic calculation on pipenet software, AutoCAD usage

Detailed Engg. - Preparation of detailed piping layout, isometrics, BOQs, 3D engineering. etc.

Vendor drawing reviews, coordination, sire support, etc

Job Profile for Position- Design-Generalist-Mechanical & Business unit - Power

First Class Graduate /Postgraduate in Mechanical Engineering.

Industry: Power plants (thermal, nuclear), Substation, Steel plant, Oil & Gas, chemical plant

Key Responsibilities:

Responsible as Lead Fire Protection Design Engineer

What are the main responsibilities for this individual (i.e., reasons we need this person)?

1. To prepare design basis report and estimate fire water pump sizing and dead storage of complete fire protection system.

2. To estimate the various types of Fire protection systems for various areas of the project under consideration.

3. To carry out equipment sizing, pipe sizing, prepare process flow diagram, P&ID’s.

4. To carry out hydraulic calculations using various software such as Pipenet. Hydraulic calculation for entire hydrant/ spray network/ spray/sprinkler/ gas protection system, study of fire hazard case scenarios.

5. To prepare detailed piping fire hydrant, spray, sprinkler piping layouts, foam system, gas protection system layouts FM200/Novec1230/CO2/Inergen/Argonite/Argon), isometrics layout drawings and construction/erection drawings

6. Estimate detailed bill of materials for fire protection equipment, piping, supports, paints, etc for procurement.

7. Prepare technical specifications, RFQ, technical datasheets for entire fire protection system.

8. To carry out bid meetings with Client & Vendor, bid analysis, technical bid evaluation report with respect to entire Fire protection systems.

9. Vendor drawing reviews for entire fire protection systems.

10. Carry out cost estimates, manhours & schedule planning activities for the project.

11. Able to do complete detailed engineering and issue drawings for construction as per NFPA, BIS, TAC, NBC, OISD, Local regulations. Getting approval from Client/ Local approving authorities. Value addition in design engineering to optimize cost.

12. Site field engineering support for erection and commissioning.

Key Skills Required:

What are the “must-have” skill sets, without which a candidate would not be considered and should not be submitted?

1. NFPA standards and detailed vendor design engineering as per NFPA is essential. FM Global standards detailed design is added advantage.

2. Work experience of entire fire protection system in power plant (thermal coal/gas/solar/substations) domestic & international is a must. Oil & gas industries experience is added advantage. Work experience in design of fire protection of transformers, cable galleries, coal conveyors, workshops, warehouse, control rooms, admin bldg, fuel oil tanks, and boilers is a must.

3. Work experience in infra projects like residential bldg, hospitals, shopping malls, commercial bldgs, hotels, etc will not be counted in relevant experience.

4. Knowledge of passive fire system, fire risk evaluation assessment is desired.

5. Good verbal and written communication skills, dynamic nature, good coordination skills with interdepartmental and with Client.

6. Familiarity with applicable Indian/International codes is a must.

7. Good decision-making capabilities & communication skills is a must.

8. Familiarization of fire alarm and detection system.

9. Deliver quality, error free documents/ drawings, take ownership of deliverable and maintain project schedule timeliness is a must.

10. Working knowledge prepare drawings on 3D platforms like PDS/PDMS/SP3D/SPPID is added advantage.

11. Ready to relocate to Project sites/ Client’s office (India/Global) on deputation (short term/long term) is a must.

What are key words you would expect to see on a resume?

NFPA, Fire protection system, Power Plant, Oil & Gas plant, Detailed engineering, Isometrics, BOQ, 3D software, Inert gas system, Pipenet, Fire risk assessment

Technical Competencies *

Acceptable Rating *

Basic engg. – basic study/concept note, System philosophy

Preparation of specifications/datasheets, TBE & contract

Hydraulic calculation on pipenet software, AutoCAD usage

Detailed Engg. - Preparation of detailed piping layout, isometrics, BOQs, 3D engineering. etc.

Vendor drawing reviews, coordination, sire support, etc

About the business

This mid – large scale engineering / construction company are based in Melbourne’s inner suburbs / CBD area. With a well organised and functional team of office and site based staff; this business are known for delivering mid – large scale construction projects across all market segments. Posessing a busy work load and sound future strategy; this group will be around for decades to come.

About the role

As a key member of this successful fire services group; you will be responsible for providing effective estimates and solutions for various buildings / construction projects. Projects will include; Health & Hospitals, commercial / retail office fit outs, plant rooms, new commercial / industrial buildings, Infrastructure and data centres. You will also be an increasingly key player in the business as you will get the chance to work more closely with

Benefits and perks

This company offers an attractive salary, car, laptop, great projects and development. Perhaps the biggest perk is the great people you’ll be delivering projects with.

Salary: $110 – $130K + Super + Car (Negotiable pending level of autonomy)

Skills and experience

• Ideally trade experience or Qualified Sprinkler Fitter (Or similar)
• Minimum 5 -8 years + previous experience working in a Trade / contractor environment.
• Estimating and quotation experience for Dry & wet fire projects
• Experience working on Fire detection, dry fire, fire sprinklers, Hydrants and general fire systems.
• Sound knowledge of the BCA, Australian Standards and local Authority requirements.
• Strong adherence to and awareness of Australian safety standards
• You must have the rights to work in Australia and be based in Melbourne
• Good communication skills written and verbal

If this role reads like it could be you, make sure you send a CV to 

You can also phone Alan on 0406 964 976 for a confidential chat about the role and general market.

**We are also looking for a Fire / Hydraulics Designer – Drafter who has experience working with local buildings projects. Get in touch for more info

Job Summary

The Fire Protection System Designer is responsible for preparing detailed design drawings, layouts, hydraulic calculations, and documentation for fire protection systems in compliance with relevant codes and client specifications. This role supports engineering and project teams in delivering safe, code-compliant, and cost-effective designs across a range of projects, including commercial buildings, industrial plants, oil & gas, data centres, and infrastructure facilities.

Location : Chennai HQ
Department : Process Safety – Industrial & Desalination
Reporting to : Design Engineering Head / Engineering Manager

Key Responsibilities:

 Codes & Standards:

Required Skills:

Construction & Commissioning Support:

Coordination & Communication:

Qualifications & Skills:

Education

Diploma or B.E./B.Tech in Mechanical/Fire Engineering or related field.

Technical Skills

 Soft Skills:

Experience:

--- XXX---

Key Responsibilities

• Plan all the works and monitor the same. Identify the risk and propose mitigation. Co-ordinate with internal and external stakeholders.
• Coordination with Design Consultants for ensure deliverables of all Fire Protection and Alarm services and co-ordination drawings and SLD, Schematic drawings etc.
• Collect Shop drawings from vendor for respective packages and get it validate with FIRE PROTECTION AND ALARM SERVICES consultants and issue contractors to execute the work.
• Getting work method of statement from respective FIRE PROTECTION AND ALARM SERVICES package from contractor and get it approved from consultants
• Execute and monitor in all the FIRE PROTECTION AND ALARM SERVICES related work
• Setting up the MEP Quality Manual, Inspection Testing Plan
• Ensure all the MIR s ar certified before using at site, also ensure consultant s representee too signed
• Setting up Documentation Process with respect to all services equipment
• Track FIRE PROTECTION AND ALARM SERVICES materials delivery and maintain long lead items delivery tracker
• Monitoring whether construction measures relating to the building are in conformity with the Design (GFC drawings) and the bills of quantities
• Participating Testing, commissioning of services activities and maintain testing certificates, checklist etc.
• Verification, evaluation and implementation of accompanying changes to the works and recommend to client for approval.
• Obtain relevant, necessary O & M documents, guaranty and warranties
• Ensure smooth handover of FIRE PROTECTION AND ALARM SERVICES packages