374 Fire Protection Engineer jobs in India

Job Profile for Position- Design-Generalist-Mechanical & Business unit - Power

First Class Graduate /Postgraduate in Mechanical Engineering.

Industry: Power plants (thermal, nuclear), Substation, Steel plant, Oil & Gas, chemical plant

Key Responsibilities:

Responsible as Lead Fire Protection Design Engineer

What are the main responsibilities for this individual (i.e., reasons we need this person)?

1. To prepare design basis report and estimate fire water pump sizing and dead storage of complete fire protection system.

2. To estimate the various types of Fire protection systems for various areas of the project under consideration.

3. To carry out equipment sizing, pipe sizing, prepare process flow diagram, P&ID’s.

4. To carry out hydraulic calculations using various software such as Pipenet. Hydraulic calculation for entire hydrant/ spray network/ spray/sprinkler/ gas protection system, study of fire hazard case scenarios.

5. To prepare detailed piping fire hydrant, spray, sprinkler piping layouts, foam system, gas protection system layouts FM200/Novec1230/CO2/Inergen/Argonite/Argon), isometrics layout drawings and construction/erection drawings

6. Estimate detailed bill of materials for fire protection equipment, piping, supports, paints, etc for procurement.

7. Prepare technical specifications, RFQ, technical datasheets for entire fire protection system.

8. To carry out bid meetings with Client & Vendor, bid analysis, technical bid evaluation report with respect to entire Fire protection systems.

9. Vendor drawing reviews for entire fire protection systems.

10. Carry out cost estimates, manhours & schedule planning activities for the project.

11. Able to do complete detailed engineering and issue drawings for construction as per NFPA, BIS, TAC, NBC, OISD, Local regulations. Getting approval from Client/ Local approving authorities. Value addition in design engineering to optimize cost.

12. Site field engineering support for erection and commissioning.

Key Skills Required:

What are the “must-have” skill sets, without which a candidate would not be considered and should not be submitted?

1. NFPA standards and detailed vendor design engineering as per NFPA is essential. FM Global standards detailed design is added advantage.

2. Work experience of entire fire protection system in power plant (thermal coal/gas/solar/substations) domestic & international is a must. Oil & gas industries experience is added advantage. Work experience in design of fire protection of transformers, cable galleries, coal conveyors, workshops, warehouse, control rooms, admin bldg, fuel oil tanks, and boilers is a must.

3. Work experience in infra projects like residential bldg, hospitals, shopping malls, commercial bldgs, hotels, etc will not be counted in relevant experience.

4. Knowledge of passive fire system, fire risk evaluation assessment is desired.

5. Good verbal and written communication skills, dynamic nature, good coordination skills with interdepartmental and with Client.

6. Familiarity with applicable Indian/International codes is a must.

7. Good decision-making capabilities & communication skills is a must.

8. Familiarization of fire alarm and detection system.

9. Deliver quality, error free documents/ drawings, take ownership of deliverable and maintain project schedule timeliness is a must.

10. Working knowledge prepare drawings on 3D platforms like PDS/PDMS/SP3D/SPPID is added advantage.

11. Ready to relocate to Project sites/ Client’s office (India/Global) on deputation (short term/long term) is a must.

What are key words you would expect to see on a resume?

NFPA, Fire protection system, Power Plant, Oil & Gas plant, Detailed engineering, Isometrics, BOQ, 3D software, Inert gas system, Pipenet, Fire risk assessment

Technical Competencies *

Acceptable Rating *

Basic engg. – basic study/concept note, System philosophy

Preparation of specifications/datasheets, TBE & contract

Hydraulic calculation on pipenet software, AutoCAD usage

Detailed Engg. - Preparation of detailed piping layout, isometrics, BOQs, 3D engineering. etc.

Vendor drawing reviews, coordination, sire support, etc

Job Profile for Position- Design-Generalist-Mechanical & Business unit - PowerFirst Class Graduate /Postgraduate in Mechanical Engineering. Industry: Power plants (thermal, nuclear), Substation, Steel plant, Oil & Gas, chemical plantKey Responsibilities:Responsible as Lead Fire Protection Design EngineerWhat are the main responsibilities for this individual (i.e., reasons we need this person)?1. To prepare design basis report and estimate fire water pump sizing and dead storage of complete fire protection system. 2. To estimate the various types of Fire protection systems for various areas of the project under consideration. 3. To carry out equipment sizing, pipe sizing, prepare process flow diagram, P&ID’s. 4. To carry out hydraulic calculations using various software such as Pipenet. Hydraulic calculation for entire hydrant/ spray network/ spray/sprinkler/ gas protection system, study of fire hazard case scenarios. 5. To prepare detailed piping fire hydrant, spray, sprinkler piping layouts, foam system, gas protection system layouts FM200/Novec1230/CO2/Inergen/Argonite/Argon), isometrics layout drawings and construction/erection drawings 6. Estimate detailed bill of materials for fire protection equipment, piping, supports, paints, etc for procurement. 7. Prepare technical specifications, RFQ, technical datasheets for entire fire protection system. 8. To carry out bid meetings with Client & Vendor, bid analysis, technical bid evaluation report with respect to entire Fire protection systems. 9. Vendor drawing reviews for entire fire protection systems. 10. Carry out cost estimates, manhours & schedule planning activities for the project. 11. Able to do complete detailed engineering and issue drawings for construction as per NFPA, BIS, TAC, NBC, OISD, Local regulations. Getting approval from Client/ Local approving authorities. Value addition in design engineering to optimize cost. 12. Site field engineering support for erection and commissioning.Key Skills Required:What are the “must-have” skill sets, without which a candidate would not be considered and should not be submitted?1. NFPA standards and detailed vendor design engineering as per NFPA is essential. FM Global standards detailed design is added advantage. 2. Work experience of entire fire protection system in power plant (thermal coal/gas/solar/substations) domestic & international is a must. Oil & gas industries experience is added advantage. Work experience in design of fire protection of transformers, cable galleries, coal conveyors, workshops, warehouse, control rooms, admin bldg, fuel oil tanks, and boilers is a must. 3. Work experience in infra projects like residential bldg, hospitals, shopping malls, commercial bldgs, hotels, etc will not be counted in relevant experience. 4. Knowledge of passive fire system, fire risk evaluation assessment is desired. 5. Good verbal and written communication skills, dynamic nature, good coordination skills with interdepartmental and with Client. 6. Familiarity with applicable Indian/International codes is a must. 7. Good decision-making capabilities & communication skills is a must. 8. Familiarization of fire alarm and detection system. 9. Deliver quality, error free documents/ drawings, take ownership of deliverable and maintain project schedule timeliness is a must. 10. Working knowledge prepare drawings on 3 D platforms like PDS/PDMS/SP3 D/SPPID is added advantage. 11. Ready to relocate to Project sites/ Client’s office (India/Global) on deputation (short term/long term) is a must. What are key words you would expect to see on a resume?NFPA, Fire protection system, Power Plant, Oil & Gas plant, Detailed engineering, Isometrics, BOQ, 3 D software, Inert gas system, Pipenet, Fire risk assessmentTechnical Competencies *Acceptable Rating *Basic engg. – basic study/concept note, System philosophyPreparation of specifications/datasheets, TBE & contractHydraulic calculation on pipenet software, Auto CAD usageDetailed Engg. - Preparation of detailed piping layout, isometrics, BOQs, 3 D engineering. etc.Vendor drawing reviews, coordination, sire support, etc

Job Profile for Position- Design-Generalist-Mechanical & Business unit - Power

First Class Graduate /Postgraduate in Mechanical Engineering.

Industry: Power plants (thermal, nuclear), Substation, Steel plant, Oil & Gas, chemical plant

Key Responsibilities:

Responsible as Lead Fire Protection Design Engineer

What are the main responsibilities for this individual (i.e., reasons we need this person)?

1. To prepare design basis report and estimate fire water pump sizing and dead storage of complete fire protection system.

2. To estimate the various types of Fire protection systems for various areas of the project under consideration.

3. To carry out equipment sizing, pipe sizing, prepare process flow diagram, P&ID’s.

4. To carry out hydraulic calculations using various software such as Pipenet. Hydraulic calculation for entire hydrant/ spray network/ spray/sprinkler/ gas protection system, study of fire hazard case scenarios.

5. To prepare detailed piping fire hydrant, spray, sprinkler piping layouts, foam system, gas protection system layouts FM200/Novec1230/CO2/Inergen/Argonite/Argon), isometrics layout drawings and construction/erection drawings

6. Estimate detailed bill of materials for fire protection equipment, piping, supports, paints, etc for procurement.

7. Prepare technical specifications, RFQ, technical datasheets for entire fire protection system.

8. To carry out bid meetings with Client & Vendor, bid analysis, technical bid evaluation report with respect to entire Fire protection systems.

9. Vendor drawing reviews for entire fire protection systems.

10. Carry out cost estimates, manhours & schedule planning activities for the project.

11. Able to do complete detailed engineering and issue drawings for construction as per NFPA, BIS, TAC, NBC, OISD, Local regulations. Getting approval from Client/ Local approving authorities. Value addition in design engineering to optimize cost.

12. Site field engineering support for erection and commissioning.

Key Skills Required:

What are the “must-have” skill sets, without which a candidate would not be considered and should not be submitted?

1. NFPA standards and detailed vendor design engineering as per NFPA is essential. FM Global standards detailed design is added advantage.

2. Work experience of entire fire protection system in power plant (thermal coal/gas/solar/substations) domestic & international is a must. Oil & gas industries experience is added advantage. Work experience in design of fire protection of transformers, cable galleries, coal conveyors, workshops, warehouse, control rooms, admin bldg, fuel oil tanks, and boilers is a must.

3. Work experience in infra projects like residential bldg, hospitals, shopping malls, commercial bldgs, hotels, etc will not be counted in relevant experience.

4. Knowledge of passive fire system, fire risk evaluation assessment is desired.

5. Good verbal and written communication skills, dynamic nature, good coordination skills with interdepartmental and with Client.

6. Familiarity with applicable Indian/International codes is a must.

7. Good decision-making capabilities & communication skills is a must.

8. Familiarization of fire alarm and detection system.

9. Deliver quality, error free documents/ drawings, take ownership of deliverable and maintain project schedule timeliness is a must.

10. Working knowledge prepare drawings on 3D platforms like PDS/PDMS/SP3D/SPPID is added advantage.

11. Ready to relocate to Project sites/ Client’s office (India/Global) on deputation (short term/long term) is a must.

What are key words you would expect to see on a resume?

NFPA, Fire protection system, Power Plant, Oil & Gas plant, Detailed engineering, Isometrics, BOQ, 3D software, Inert gas system, Pipenet, Fire risk assessment

Technical Competencies *

Acceptable Rating *

Basic engg. – basic study/concept note, System philosophy

Preparation of specifications/datasheets, TBE & contract

Hydraulic calculation on pipenet software, AutoCAD usage

Detailed Engg. - Preparation of detailed piping layout, isometrics, BOQs, 3D engineering. etc.

Vendor drawing reviews, coordination, sire support, etc

Job Summary

The Fire Protection System Designer is responsible for preparing detailed design drawings, layouts, hydraulic calculations, and documentation for fire protection systems in compliance with relevant codes and client specifications. This role supports engineering and project teams in delivering safe, code-compliant, and cost-effective designs across a range of projects, including commercial buildings, industrial plants, oil & gas, data centres, and infrastructure facilities.

Location : Chennai HQ
Department : Process Safety – Industrial & Desalination
Reporting to : Design Engineering Head / Engineering Manager

Key Responsibilities:

 Codes & Standards:

Required Skills:

Construction & Commissioning Support:

Coordination & Communication:

Qualifications & Skills:

Education

Diploma or B.E./B.Tech in Mechanical/Fire Engineering or related field.

Technical Skills

 Soft Skills:

Experience:

--- XXX---

AutoCAD Engineer / Design Engineer - Fire Protection Systems

We are looking for a skilled and detail-oriented AutoCAD Engineer / Design Engineer to join our team. The candidate will be responsible for preparing precise 2D/3D layouts and technical drawings for various fire protection systems such as fire hydrants, fire alarm systems, sprinklers, and smoke detectors.

Responsibilities:

• Create and revise AutoCAD drawings based on fire protection project requirements.
• Read and interpret MEP, architectural, and structural layouts.
• Coordinate with engineers and site teams to modify and update designs.
• Maintain drawing logs, revision records, and documentation registers.
• Ensure all drawings comply with NFPA standards, local codes, and project specs.

Skills and Qualifications:

• Diploma or B.E./B.Tech in Mechanical/Electrical Engineering or related field is required.
• 2-3 years of drafting experience in MEP, piping, or fire protection systems is essential.
• Proficient in AutoCAD 2D is mandatory (Revit knowledge is an added advantage).
• Ability to read technical drawings and construction plans is required.
• Good communication and coordination skills are necessary.

Sr. Sales Engineer - Pump/Valves/ Fire Protection

We are seeking a proactive Sr. Sales Engineer to drive sales of industrial consumable products within the fire protection sector , with a focus on Pumps and Valves. This role involves building strong client relationships, identifying new business opportunities through market research, and executing sales strategies to achieve targets. You will be instrumental in presenting tailored solutions and managing the full sales cycle for EPC Projects .

• Drive sales of industrial consumable products within the fire protection sector .
• Build and maintain strong relationships with customers to foster business growth.
• Conduct market research to identify new opportunities, generate leads , and secure appointments.
• Prepare and send quotations in coordination with the Sales Manager and follow up as needed.
• Visit client sites and meet with customers when required to understand needs and offer tailored solutions .
• Present product offerings to both new and existing clients, aligning solutions to meet client requirements.
• Develop and execute sales strategies aimed at reaching potential customers and achieving sales targets .
• Prepare proposals, technical documents , and other materials to support the sales process.
• Maintain ISO-compliant records and manage reporting through MIS as required.
• Must be handling EPC Projects .

Skills and Competencies:

• Strong communication skills .
• Proficient in identifying market segments and potential business opportunities .
• Experience in delivering product presentations .
• Goal-oriented with the ability to achieve sales objectives.
• This position requires a proactive approach to sales, a customer-focused 

We are seeking a seasoned and dynamic Sr. Estimation & Design Manager with over 3+ years of extensive experience in the operation and maintenance of Electronic Security, Fire Detection/Suppression, and Integrated Building Management Systems (IBMS). This pivotal role will oversee all design and engineering functions, ensuring compliance, technical excellence, and seamless project execution.

• Design & Engineering:
• Responsible for the complete design & engineering function within the organization.
• Ensure the release and review of all designs and detailed work to be executed within timelines.
• Ensure all designs adhere to NFPA rules and regulations and meet all compliance standards.
• Provide efficient technical presentations to clients .
• Project Support & Execution:
• Support and provide technical assistance to Project Managers and Site Engineers for successful execution (high-quality execution and timely completion of projects).
• Establish effective communication and coordination with vendors, consultants, and clients .
• Visit sites to ensure installation and commissioning are done as per design requirements.
• Ensure accurate capturing and maintenance of all Reports and MIS within the time-frame.
• Ensure proper handover of all relevant documents to clients upon project completion.
• Presales & Optimization:
• Actively involved in Presales Support to ensure offers sent to clients are technically correct.
• Follow an active and efficient mechanism for As-Built Drawings to ensure timely project closure.
• Ensure optimization of project costs through line balancing, verification of expenses, and adherence to project plans.
• Inter-Department Alignment:
• Improve supply chain and project processes for more effective material planning .
• Cross-functional planning with the Supply Chain function for reduction of Lead Time .
• Ensure the Design Plan is in coherence with the Project Plan, with weekly reviews with respective Project Managers.
• Improve processes and tighten quality control to reduce wastage and Poor Quality (PQ).
• MIS & Reports:
• Submission of Design trackers for all open projects.
• Prepare Do's and Don'ts for every system.
• Handle all internal and external escalation queries regarding documents, comments on observations, and settlement concerning assigned projects.
• Other Responsibilities:
• Ensure 100% Design compliance at all times.
• Share learnings from past projects and implement them in new projects.
• Learn at least two new system designs from the OEM.

• Diploma or Bachelor's degree in Engineering (Electrical/Mechanical).
• 3+ years of experience in designs of Electronic Security, Fire Detection, Fire Suppression, and IBMS.
• Strong communication and interpersonal skills .
• In-depth knowledge of industry-specific technologies and best practices .

If you are a team player with a successful track record in managing and delivering quality designs in the Electronic Security, Fire Detection/Suppression, and IBMS industry, we invite you to apply and contribute to the continued success of our organization and excel your career growth.