388 Hardware Design jobs in India

About Sun Mobility -

Welcome to SUN Mobility, where we aim to make electric vehicles affordable and accessible to all. At SUN Mobility, we believe electric vehicles are the future of mobility, and we aim to accelerate the adoption of electric mobility with our innovative battery swapping technology. Our technology is designed to be universally interoperable across various vehicle platforms and form factors, making it future-proof, sustainable and highly scalable. With our state-of-the art Smart Batteries and vast network of IoT-enabled Swap Points, long EV charging times, high upfront costs and range anxiety are a thing of the past. With collaborations and partnerships spanning the best of the industry’s vehicle manufacturers, battery cell technology providers, fleet operators, ride-sharing players and last-mile transport operators, we are proud to be at the forefront of the EV revolution.

Here’s more about us – SUN Mobility

Job Title:

Hardware Design Engineer

Ideal Experience:

3-6 years of Experience in the development of electronic products from concept to production with Graduation in BE / B.Tech/ M. Tech in Electronics / ECE / EEE / EI / Power Electronics.

Roles and Responsibilities:

• Familiarity with full electronic products life cycle management.
• Wide knowledge of electronic devices and circuits and their application, including power devices, microcontrollers, switch mode power supplies, RF circuits, analogue and digital circuits and design for EMC and printed circuit board design and manufacturing process.
• Hands-on design and development of hardware for embedded electronics systems. The hardware development may include power electronics topologies and control, various analog, digital, and wireless communications, battery management systems, battery chargers, etc.
• Performing component selection, cost estimation, hardware design calculations, simulations, and worst-case analysis.
• Support PCB designers in layout. Familiarity with PCB Assembly processes (EMS).
• Hands-on experience in board bring-up and testing.
• Creating and reviewing design verification and validation test plans.
• Experience in the automotive domain and functional safety (FuSa) is an added advantage.
• Works closely, interacts with, and discusses with different departments, E&E FAEs and Manufacturers.
• Incorporating safety, serviceability, scalability, and manufacturability feedback in design.
• Proactively identifying technical risks and developing mitigation strategies.
• Driving projects with CFT includes program teams, Validation teams, software teams, mechanical teams, Integration team, Field Team etc.
• Leading DFMEA discussions, root cause analysis (RCA), containment plans, and corrective actions.
• Supporting in mitigating product, sourcing, and program risks.
• Initiating value analysis/value engineering (VAVE) and cost reduction activities.
• Working Knowledge of Problem Resolution Techniques using 8D.

Key Skills& Attributes:

• Expertise in using 8bit, 16-bit, 32 bit & ARM based Microcontrollers.
• Hands-on Knowledge of Analog, Digital, power electronics.
• In Depth knowledge of various wired and wireless communication protocols CAN, UART, SPI, I2C, RS485, MODBUSBLE, Wi-Fi, GSM, GPRS, GPS.
• Understanding Embedded Software will be an added advantage.
• Excellent analytical, reasoning and communication skills.
• Expertise in electronic product standards and implementation to qualify products for IEC, ISO, AIS, etc.
• Expertise in using Instruments: Multimeter, oscilloscope, Power meter etc.
• Knowledge of PCB design guidelines and manufacturing constraints.
• Troubleshooting EMI/EMC issues.

Note : Looking for Immediate Joiners Only.

About Niqo Robotics

Niqo Robotics is a Bangalore based Agri-tech company focused on AI, Computer Vision and Robotics, revolutionizing the way farming is undertaken in India and the world. Through our robots we aim to provide smart and sustainable solutions to maximize farmer profitability whilst minimizing the ill effects of excessive chemical spraying on the environment.

Job Summary:

We are seeking a highly skilled and motivated Hardware Design Engineer to join our innovative engineering team. As a Hardware Design Engineer, you will play a crucial role in the design, analysis, and implementation of analog, digital and power circuitry for our cutting-edge products.

Experience: 4 - 7 Years

Responsibilities:

● Design and analyse analog, digital and power circuitry for our products, ensuring optimal performance, reliability, and power efficiency

● Understand and apply SOC/CPU/GPU architecture principles to guide hardware design decisions

● Select appropriate SOC/CPU/GPU components based on project requirements and specifications

● Design high-speed digital systems, considering signal integrity, noise reduction, and power distribution

● Develop a robust and reliable cable harnessing system to meet automotive and agricultural environments

● Conduct antenna selection and system interface design for wireless communication capabilities

● Implement impedance matching techniques to optimize signal transfer and minimize reflections

● Perform RF tuning and testing to ensure optimal wireless performance and compliance with wireless communication protocols such as Wi-Fi, Bluetooth, LoRa, and GNSS

● Select and configure microcontrollers, microprocessors, and DSPs, considering target performance, power consumption, and system requirements

● Design and validate driver circuits for various loads such as relays, solenoid valves and LED arrays

● Demonstrate proficiency in low-speed and high-speed serial and parallel communication protocols such as RS232, RS485, UART, SPI, I2C, USB, Ethernet, HDMI, MIPI, PCIe, DDR and CAN

● Collaborate with PCB layout designers and board fabricators to create well-organized and manufacturable PCB layouts

● Conduct signal integrity analysis to identify and mitigate potential issues related to noise, crosstalk, and impedance mismatches

● Profile the system power consumption and create a power tree to better understand and hence optimise the system’s power consumption

● Optimise component selection across sub-modules to achieve target product costs, reliability and performance

● Create designs keeping in mind concepts such as DFM and DFA Qualifications/Capabilities:

● Bachelor's degree in Electrical Engineering or related field (Master's degree preferred)

● Proven experience in analog, digital and power circuit design and analysis

● Strong understanding of SOC/CPU/GPU architecture and its application in hardware design

● Experience with high-speed digital system design and signal integrity analysis

● Familiarity with antenna selection, RF tuning, and wireless communication protocols

● Proficiency in selecting and configuring microcontrollers, microprocessors, and DSPs

● Knowledge of serial communication protocols (RS232, RS485, UART, SPI, I2C, USB, Ethernet, MIPI, PCIe and CAN)

● Experience in PCB layout design and signal integrity analysis

● Strong problem-solving skills and ability to troubleshoot hardware-related issues and establish RCA

● Excellent communication and collaboration skills to work effectively in cross-functional teams

Location – Indiranagar, Bangalore (Work from Office)

If you are passionate about hardware design, enjoy working on challenging projects, and want to contribute to the development of cutting-edge technology, we would love to hear from you.

Apply now to join our dynamic team of engineers and make a significant impact in the industry.

Job Title: Embedded Hardware Architect

Company – Zydus Medtech Pvt Ltd

Location - Ahmedabad

Key Roles & Responsibilities

Define the overall hardware architecture of embedded systems based on technical complexity and requirements.

Possess comprehensive knowledge of the hardware design flow and provide technical guidance to the team.

Responsible for:

• - Requirements gathering
• - Architecture and high-level block diagram design
• Interface requirements & design aspects of Architecture
• Scalable, Upgradable & Test based architecture
• Incorporating FMEA & Risk
• - PCB layout verification with consideration for EMI/EMC issues
• - Design validation and integration
• - Component selection
• - Prototype development and debugging
• - Board and system-level testing

Ensure adherence to hardware design standards and methodologies.

Document design specifications and implementation details.

Provide technical leadership and mentorship to hardware engineers and PCB layout engineers.

Desired Experience

Hands-on experience with processors such as TI, NXP, Qualcomm.

Expertise in power supply design including:

• - SMPS
• - DC/DC converters (Buck, Boost, LDO)
• - AC to DC converters
• - Battery Management Systems

Proficient in communication protocols: I2C, SPI, CAN, UART, JTAG, CSI, LVDS, MIPI, RS-232, RS-485, USB, Ethernet.

Familiarity with wireless and peripheral technologies: GPS, GSM, Wi-Fi, BLE, ZigBee, PCIe, HDMI, SD Card, LCD, PCI.

Experience with debugging/lab tools such as JTAG, oscilloscopes, logic analyzers, Function Generator

Experience with memory technologies: EEPROM, NOR, NAND, LPDDR4/5, DDR3/4, eMMC, RF protocols.

Proven ability to manage multiple projects for global and local clients.

Skilled in schematic and PCB design tools: Altium Designer, OrCAD, Mentor Graphics, PADS, KiCad.

Design of Six Sigma

Essential Qualifications

• Education: B.Tech/M.Tech in Electronics, Electrical, or related field (preferred).
• Experience: Minimum 6 years in embedded hardware development.