23 Machining jobs in India

Teamleider Machining

Een baan om trots op te zijn – dat is wat je vindt bij Fokker Landing Gear in Papendrecht. Als Teamleider Machining geef je leiding aan een team van CNC-operators die werken aan kritieke onderdelen van vliegtuiglandingsgestellen. Hiermee lever je direct een bijdrage aan de veiligheid van mensen wereldwijd. Je komt terecht in een hightech en innovatieve werkomgeving waar samenwerking, kwaliteit en persoonlijke ontwikkeling centraal staan.

Jouw rol

Als teamleider ben jij de schakel tussen de werkvloer en het management. Je stuurt het team van CNC-operators operationeel aan, bewaakt de voortgang en kwaliteit van het werk en zorgt dat de doelstellingen worden behaald. Je zorgt voor een veilige, efficiënte en prettige werkomgeving waarin iedereen zich kan ontwikkelen.

Taken en verantwoordelijkheden

Dagelijks aansturen van het CNC-machining team (circa 10-15 operators).

Plannen, coördineren en verdelen van werkzaamheden op basis van de productieplanning.

Toezien op naleving van kwaliteits-, veiligheids- en Arbo-richtlijnen.

Begeleiden, coachen en ontwikkelen van medewerkers via ontwikkelgesprekken en begeleiding op de werkvloer.

Signaleren en oplossen van technische en organisatorische knelpunten.

Actief bijdragen aan continue verbeterprocessen (bijv. Lean initiatieven, 5S).

Eerste aanspreekpunt voor technische ondersteuning en escalaties in de ploeg.

Samenwerken met andere afdelingen zoals Productieplanning, Engineering en Quality.

Rapporteren aan de Productiemanager.

Wat jij meebrengt

Mbo-4 of hbo werk- en denkniveau, bij voorkeur richting Werktuigbouwkunde of vergelijkbaar.

Aantoonbare ervaring in een leidinggevende rol binnen een technische of productieomgeving.

Ervaring met CNC verspaning (frezen, draaien).

Sterke communicatieve vaardigheden, een coachende stijl van leidinggeven en oplossingsgericht.

Je spreekt en schrijft goed Nederlands en Engels.

Wat wij bieden

Een uitdagende functie in een innovatieve en internationale organisatie binnen de luchtvaartindustrie.

Een jaarcontract met uitzicht op een vast dienstverband.

40 betaalde verlofdagen per jaar (27 vakantiedagen + 13 ATV-dagen bij fulltime dienstverband).

Marktconform salaris en uitstekende secundaire arbeidsvoorwaarden volgens de cao Metalektro.

Een degelijk pensioen via PME.

Reiskostenvergoeding vanaf 10 km enkele reis.

Regelmatig leuke personeelsactiviteiten via onze actieve personeelsvereniging.

Ruimte voor ontwikkeling, doorgroeimogelijkheden en opleiding.

Een informele werksfeer waarin collegialiteit en teamwork centraal staan.

Over Fokker Landing Gear

Fokker Landing Gear, onderdeel van GKN Aerospace, is gespecialiseerd in het ontwerp, de productie, assemblage en het onderhoud van complete landingsgestelsystemen. Onze systemen worden gebruikt in toonaangevende luchtvaartuigen zoals de F-35 Lightning II (JSF), Apache, NH90 en Bombardier Dash 8.

Solliciteren

Ben jij klaar voor de volgende stap in jouw carrière als teamleider binnen een hightech productieomgeving? Klik op de knop “Solliciteer” om direct te reageren.

WhatJobs is looking for a highly skilled and detail-oriented **CNC Machining Operative** to join our fully remote manufacturing team. In this role, you will be responsible for overseeing and optimizing CNC machinery operations from a distance, ensuring precision and efficiency in production processes. Your tasks will involve remote monitoring of machine performance, analyzing production data, troubleshooting operational issues, and implementing adjustments to improve output quality and reduce waste. You will work closely with on-site teams to communicate machine status, coordinate maintenance, and provide remote technical support. Proficiency in reading blueprints, understanding technical specifications, and operating various CNC machines (lathe, mill, router) is essential. The ideal candidate will possess a strong understanding of machining principles, G-code and M-code programming, and CAD/CAM software. You will be tasked with setting up, calibrating, and maintaining CNC equipment, ensuring adherence to strict quality control standards. This role requires a keen eye for detail, excellent problem-solving abilities, and the capacity to work independently in a remote setting. A background in mechanical engineering or a related field is highly desirable. You must have a reliable internet connection and a suitable home office environment to perform your duties effectively. We value individuals who are proactive, safety-conscious, and committed to achieving production goals. This is an excellent opportunity to leverage your expertise in a challenging and rewarding remote manufacturing environment, contributing directly to the success of our production lines. Join us and be a part of shaping the future of manufacturing through innovative remote operations.

Our client is looking for a skilled CNC Machining Specialist to join their manufacturing facility in Thiruvananthapuram, Kerala, IN . This role involves operating and maintaining a variety of CNC (Computer Numerical Control) machines to produce precision metal parts. The ideal candidate will have extensive experience in setting up CNC lathes, milling machines, and grinders, as well as proficiency in reading and interpreting technical drawings and blueprints. Key responsibilities include programming CNC machines using G-code and M-code, selecting appropriate tools and cutting speeds, and ensuring the quality of finished products through precise measurements and inspections. You will be responsible for performing routine maintenance on machines, troubleshooting any operational issues, and adhering to strict safety protocols. The successful applicant will also be involved in optimizing machining processes to improve efficiency and reduce waste. This position requires a strong understanding of metallurgy, tool wear, and surface finish requirements. Excellent attention to detail and the ability to work with tight tolerances are crucial. We are seeking a dedicated and reliable individual who is committed to producing high-quality components and contributing to the overall success of our manufacturing operations. Previous experience with CAD/CAM software is highly advantageous. Join our team and be a part of a company that values precision and innovation in manufacturing.

It's not just about your career or job title. It's about who you are and the impact you will make on the world. Because whether it's for each other or our customers, we put People First. When our people come together, we Expand the Possible and continuously look for ways to improve what we create and how we do it. If you are constantly striving to grow, you're in good company. We are revolutionizing the way the world moves for future generations, and we want someone who is ready to move with us.
**Mission**
**Key missions of the position:**
+ Development of Casting, machining, Forging and sheet metal components for assigned project with detail should costing workout to award the business to suppliers.
+ Closely work with Bid and product management team to commit the lowest direct material cost to win the business and the same cost should be achieved during the project execution
+ To take complete ownership of assigned project's Total cost ownership (TCO), drive and improve Project contract Margin. Bid to Execution
+ Localisation of all commodities like Casting, Forging, machining, Fabrications,
+ Define and execute Sourcing plan such as Make or buy, Localization and Transfer of Technology projects, dual sourcing.
+ Define Sourcing plan following retro-plaining methodology to meet Project Internal / Customer FAI milestones covering long lead time items, Internal (SISCO) products, sourced components, and sub-systems on time for optimizing the Project cost.
+ Deploy standard APQP process for component, sub-assembly, proprietary parts sourcing.
+ Manage Project Direct Material Cost Package, Identify and drive Margin Improvement Programs (MIP) for improving Project QCD, review periodically the QCD with the stakeholders, establish a robust "Forecast at completion" vision, taking into account risks, ambitions and uncertainties, establish waterfall analysis at each Project Gate reviews, engage commodity buyer and Souring team for managing the deliverables.
+ Present best possible execution plan to the NPI team.
+ To drive cost competitiveness by working closely with Engineering, Process Engineering, Product Management, Sales and Commodity Sourcing team.
+ Participate in all cost workshop in-coordination for improving the assigned product competitiveness.
+ Build business case for Make or Buy, localization in the assigned product line for delivery NPI project in time and for improving competitiveness.
**Measurement**
+ Q : First time right "First Article Inspection"
+ C : Contract Margin - Cost reduction vs. Target Cost
+ D : On time delivery of NPI Projects
+ Competitiveness DMC commitment to win the business for assigned product lines.
**Main responsibilities:**
**Project Souring Execution:**
+ Prepare retro-planning considering Internal and Customer FAI targets by engaging relevant stakeholders such as Project Engineering Manager, Project Supplier Quality, Project Supply Chain, Process Engineering, and execution of retro-plan until FAI milestone are met.
+ Organize necessary materials are available for timely testing, validation, and components. Propose multiple option for bringing visual/physical effect to the component being developed using considering not limited to quick sourcing, 3D-printing, RPT and other latest technologies.
+ Propose / Challenge manufacturability of each component given for development and propose alternate RM, manufacturing ideas, locally available RM for sustenance.
+ Plan and execute localization, Transfer of Technology Project, Make-or-buy, Re-sourcing, outsourcing decision for meeting project delivery commitment. Improving Product cost and competitiveness.
+ Identify and drive Cost Improvement Programs on regular basis for improving product cost including ideas from suppliers.
+ Maximize local spend for improving local content and competitiveness of the product.
+ Deploy Commodity Sourcing Strategies for all component / sub-assemblies sourcing.
**Tender & Competitiveness**
+ Perform Quick costing, ZBC - Zero based costing when the inputs are made available for building quick product costing for assessing / meeting NPI Project costs.
+ Conduct regular meetings with cross function team comprising Engineering, Product Management, Project, and Commodity Sourcing Teams for aligning the purchasing strategies in line with the project timelines for meeting set target costs.
+ Ensure that the commodity strategies are implemented all the time during NPI project, anticipate and communicate new supplier and technology needs to the commodity team.
+ Manage communication between Sourcing and Transfer Management team.
+ Maximize re-use of proven solution (Return on Experience).
+ Provide necessary inputs to Engineering, Product Management, during Product cost-work-out consistently for improving product cost.
+ Collect and formalize REX (Return on Experience) on solutions which were successful (QCD wise ).
**Deploy APQP**
+ Deploy Standard APQP process while sourcing components, Sub-assemblies, products with the support of SQA.
+ Organize and manage technical reviews with Suppliers, Supplier Quality, Engineering, and supply chain to formalize the team Feasibility Commitment during supplier selection and ensure all technical requirement are met.
+ Collect REX (Return on Experience) from the Previous projects and deploy/address those challenges while developing the components and NPI project review such that future components / products will be defect free and easily manufacturable at less feasible time.
People Management: No
Budget Management: Yes, Tender DMC commitment and Improvement plan to reduce the cost.
**Required Candidate Profile**
**Education/Training :** **_Bachelor of Engineering - Mechanical (Preferred)_**
**Professional** **Experience**
+ Minimum 12 years' of Sourcing experience in Industries, MNC preferred.
+ Strong knowledge on the casting , machining & Forging process
**Key Competences (Transversal/Professional)**
**Competence & Level**
Multi-Commodity expertise (Casting, machining, Forging etc.) : Level 1
APQP / PPAP, Supplier development, EHS Managements: Level 2
ZBC - Zero based costing, should costing, design / re-design to cost : Level 1
Proficiency in value engineering principles and product costing for project : Level 2
Knowledge of ERP / MRP tools, PDM tools, Tollgate process etc.:Level 3
**Languages**
+ English
+ Hindi
+ Tamil / Kanda / Telugu
**Other Specifications**
**Behavioural and Skills**
+ Strong interpersonal, communication skills.
+ Proficiency in value engineering principles and product costing for projects
+ ZBC - Zero based costing, should costing, design / re-design to cost.
+ Focused on delivery of activities within tight deadlines
+ Knowledge of ERP / MRP tools, PDM tools, Tollgate process etc.
+ APQP / PPAP, Supplier development, EHS Managements.
**Who are we?**
Wabtec Corporation is a leading global provider of equipment, systems, digital solutions, and value-added services for freight and transit rail as well as the mining, marine, and industrial markets. Drawing on nearly four centuries of collective experience across Wabtec, GE Transportation, and Faiveley Transport, the company has grown to become One Wabtec, with unmatched digital expertise, technological innovation, and world-class manufacturing and services, enabling the digital-rail-and-transit ecosystems.
Wabtec is focused on performance that drives progress and unlocks our customers' potential by delivering innovative and lasting transportation solutions that move and improve the world. We are lifelong learners obsessed with making things better to drive exceptional results. Wabtec has approximately 27K employees in facilities throughout the world. Visit our website to learn more! Commitment to Embrace Diversity:**
Wabtec is a global company that invests not just in our products, but also our people by embracing diversity and inclusion. We care about our relationships with our employees and take pride in celebrating the variety of experiences, expertise, and backgrounds that bring us together. At Wabtec, we aspire to create a place where we all belong and where diversity is welcomed and appreciated.
To fulfill that commitment, we rely on a culture of leadership, diversity, and inclusion. We aim to employ the world's brightest minds to help us create a limitless source of ideas and opportunities. We have created a space where everyone is given the opportunity to contribute based on their individual experiences and perspectives and recognize that these differences and diverse perspectives make us better.
We believe in hiring talented people of varied backgrounds, experiences, and styles. People like you! Wabtec Corporation is committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or expression, or protected Veteran status. If you have a disability or special need that requires accommodation, please let us know.

Embark on a rewarding career journey with our client as a CNC Machining Operations Apprentice. This is a fully remote apprenticeship program designed to equip you with the fundamental skills and knowledge required to excel in modern manufacturing environments. You will learn the intricacies of operating and maintaining CNC machines, interpreting technical drawings, and ensuring precision in component fabrication. Through a combination of online learning modules, virtual workshops, and simulated practical exercises, you will gain hands-on experience under the guidance of experienced mentors. Your training will cover essential areas such as blueprint reading, G-code and M-code programming, tool selection, quality control procedures, and safety protocols. We are seeking enthusiastic and dedicated individuals who are eager to learn and develop a strong foundation in machining. This role requires a commitment to completing all training modules and actively participating in virtual collaborative projects. You will develop critical thinking skills and a meticulous approach to your work, essential for success in this field. This is an excellent opportunity to gain valuable industry experience and potentially secure a full-time position upon successful completion of the apprenticeship. Join our forward-thinking company and begin your career in skilled trades from your remote location. This apprenticeship is based in Bhopal, Madhya Pradesh, IN .

**Job Duties and Responsibilities**:

- Job Description & Responsibilities:

- Manage & lead all cost engineering-related tasks for the designated project scope.
- Collaborate with Strategic Buyers, Category Managers, NPI Teams, Product & Design teams to achieve cost targets and sourcing strategy goals through proactive efforts.
- Expertly analyze costs, manufacturing processes, and material/supplier differences using cost methodologies, tools, and software models.
- Analyze costs and discover potential savings for both current and new parts/products through a cost reduction investigation.
- Maintain reliable and accurate data related to raw materials, processes, machines, labour rates etc. relevant to the scope of work.
- Requires knowledge of Cost estimation software’s such as “aPriori” or Costimator.
- Analyze supplier manufacturing process, infrastructure and quotes and provide arguments with data to aid communication with suppliers and customers and achieve cost optimization.
- Participate in supplier meetings and negotiations to challenge prices and aim for cost reductions to meet target costs.
- Take end-to-end responsibility for the full scope interacting with all internal and external stakeholders as required.
- Collaborate with buyers to enhance best practices in the supplier process by drawing on past expertise.
- Work with all BU cross functional teams to achieve cost targets for NPD & existing products.
- Work with Design team for Design optimization to reduce the cost of new products.
- Internal communication and maintaining project related documentation.
- Excellent in written, verbal, presentation, planning, and problem-solving skills.
- Cost analysis without prototypes. & Input for design improvements.

Minimum years of experience
16 - 18 years of relevant experience in any of this domain. (Casting -1, Forging - 1, Stampings - 1, Gears - 1, Machining & Powder metals -1
Plastics & Rubber - 1, Motors & Inverters -1, Wiring, electrical & Electronics -1)

Nature of experience
- Costing of components and assemblies in Mfg.
- Process and product mfg. knowledge in Digital Environment.

Educational Qualifications: BE / M.E. in Mechanical/Production /Electrical & Electronics Eng from reputed university.

Our client is seeking a highly motivated and technically inclined individual to join their team as an Advanced Manufacturing Apprentice, specializing in CNC Machining. This is an exceptional opportunity to gain hands-on experience in a state-of-the-art manufacturing facility located in **Lucknow, Uttar Pradesh, IN**. You will work alongside seasoned professionals, learning to operate, program, and maintain advanced CNC machinery. Responsibilities will include interpreting blueprints and technical drawings, setting up machines, selecting appropriate tooling, performing precision machining operations, inspecting parts for quality and adherence to specifications, and contributing to process improvement initiatives. The ideal candidate will possess a strong aptitude for mechanical systems, a keen eye for detail, and a commitment to learning and safety. While formal experience is not required, a background in vocational training or a demonstrable passion for engineering and manufacturing will be advantageous. This apprenticeship program is designed to provide comprehensive training, leading to a skilled trade qualification. Successful completion of the apprenticeship may lead to full-time employment opportunities within the company. We are looking for individuals who are eager to contribute, willing to follow instructions meticulously, and possess a proactive attitude towards problem-solving. This role requires physical stamina and the ability to work effectively in a team environment. Comprehensive training will be provided in areas such as CAD/CAM software, G-code programming, material science, and quality control standards. Join us to build a rewarding career in advanced manufacturing and become a skilled machinist.Responsibilities:

• Learn to operate and maintain CNC milling and turning centers.
• Read and interpret complex engineering drawings and blueprints.
• Perform precise measurements using calipers, micrometers, and other inspection tools.
• Assist in programming CNC machines under supervision.
• Ensure all work meets stringent quality standards and specifications.
• Maintain a clean and safe working environment.
• Participate in all scheduled training sessions and workshops.
• Contribute to continuous improvement efforts in the production process.

Qualifications:

• High school diploma or equivalent is required.
• Strong mathematical and mechanical aptitude.
• Excellent problem-solving skills and attention to detail.
• Ability to work effectively in a team and independently.
• Physical ability to stand for extended periods and lift moderate weight.
• Willingness to adhere to all safety regulations and company policies.
• A keen interest in manufacturing and technology.