874 Production Testing jobs in India

1. Participate in Toolbox Talks conducted by FAT (Factory Acceptance Test) Leads at the start of shift and understand daily tasks and special requirement for the orders planned for the day.

2. Daily supervision to ensure compliance of WIS (Work instruction sheet) and HIRA (Hazard identification and Risk Assessment) guidelines for testing during FRT (Factory Routine Test) and FAT.

3. Ensure compliance to PTW (Permit To Work) for switching ON power supply trolley.

4. Actively intervene to Identify Unsafe Act and Unsafe Conditions during testing.

5. Calibration, maintenance and upgradation of testing equipment.

6. Ensure all trolleys and equipment used in testing area are in good working condition.

7. Ensure compliance to EHS points on shopfloor as per guidelines.

8. Support in addressing technical queries of technicians with the help of FAT Leads.

9. Strive to instill culture of safe working practices in testing team.

10. Support in developing testing skills of testing team.

11. Sound knowledge - IEC, IS of Routine testing of MV switchgear panels.

12. Participation in Internal and external EHS and other audits.

13. Provide Product and Process training to testing engineers.

14. Daily monitoring of planned testing activities.

15. Handling of subordinate s topics like attendance, expense claim, daily output, behavior etc.

16. Ensure readiness of the panels before factory routine test.

17. KPI - Maintain records of process documents like PTW, UA/UC, calibration and maintenance of test trolleys.

18. Communicate feedback and lessons learnt to Assembly & Testing engineers.

19. Identify and drive Digitalization topics within area of responsibility to enhance and optimize the processes.

Qualification:

1. Degree Electrical Engineer with 6 to 8 years of experience or Diploma Electrical Engineer with 8 to 10 years of experience MV panel testing of AIS switchgear Products.

2. Preference for Electrical Safety Diploma.

3. Exposure to Field services or commissioning activities at sites will be an added advantage.

Skills:

1. Must have excellent verbal, written communication, and presentation skills to communicate technical information within Siemens.

2. Competent with Microsoft Office suite (Excel, Word, PowerPoint, etc.)

3. Good understanding required about EHS guideline to be followed during electrical / mechanical testing.

4. Must exhibit a high level of motivation and energetic approach to job duties and team management.

• Participate in Toolbox Talks conducted by FAT (Factory Acceptance Test) Leads at the start of the shift and understand daily tasks and special requirements for the orders planned for the day.
• Supervise daily activities to ensure compliance with WIS (Work Instruction Sheet) and HIRA (Hazard Identification and Risk Assessment) guidelines for testing during FRT (Factory Routine Test) and FAT.
• Ensure compliance with PTW (Permit To Work) for switching ON power supply trolley.
• Actively identify and intervene in unsafe acts and conditions during testing.
• Perform calibration, maintenance, and upgradation of testing equipment.
• Ensure all trolleys and equipment used in the testing area are in good working condition.
• Enforce compliance with EHS points on the shop floor as per guidelines.
• Support in addressing technical queries of technicians with the help of FAT Leads.
• Promote a culture of safe working practices within the testing team.
• Assist in developing the testing skills of the team.
• Possess sound knowledge of IEC, IS standards for routine testing of MV switchgear panels.
• Participate in internal and external EHS and other audits.
• Provide product and process training to testing engineers.
• Monitor daily planned testing activities.
• Manage subordinates' topics like attendance, expense claims, daily output, and behavior.
• Ensure readiness of panels before the factory routine test.
• Maintain records of process documents like PTW, UA/UC, calibration, and maintenance of test trolleys.
• Communicate feedback and lessons learned to assembly and testing engineers.
• Identify and drive digitalization topics to enhance and optimize processes within the area of responsibility.

Qualification

• Degree in Electrical Engineering with 6 to 8 years of experience, or Diploma in Electrical Engineering with 8 to 10 years of experience in MV panel testing of AIS switchgear products.
• Preference for Electrical Safety Diploma.
• Exposure to field services or commissioning activities at sites is an added advantage.

Skills

• Excellent verbal, written communication, and presentation skills to communicate technical information within Siemens.
• Proficient with Microsoft Office suite (Excel, Word, PowerPoint).
• Strong understanding of EHS guidelines to be followed during electrical/mechanical testing.
• High motivation, energetic approach to job duties, and team management.

Job Description of Testing shop Supervisor:

1.Participate in Toolbox Talks conducted by FAT (Factory Acceptance Test) Leads at the start of shift and understand daily tasks and special requirement for the orders planned for the day.

2.Daily supervision to ensure compliance of WIS (Work instruction sheet) and HIRA (Hazard identification and Risk Assessment) guidelines for testing during FRT (Factory Routine Test) and FAT.

3.Ensure compliance to PTW (Permit To Work) for switching ON power supply trolley.

4.Actively intervene to Identify Unsafe Act and Unsafe Conditions during testing.

5.Calibration, maintenance and upgradation of testing equipment.

6.Ensure all trolleys and equipment used in testing area are in good working condition.

7.Ensure compliance to EHS points on shopfloor as per guidelines.

8. Support in addressing technical queries of technicians with the help of FAT Leads.

9. Strive to instill culture of safe working practices in testing team.

10. Support in developing testing skills of testing team.

11. Sound knowledge - IEC, IS of Routine testing of MV switchgear panels.

12. Participation in Internal and external EHS and other audits.

13. Provide Product and Process training to testing engineers.

14. Daily monitoring of planned testing activities.

15. Handling of subordinates topics like attendance, expense claim, daily output, behavior etc.

16.Ensure readiness of the panels before factory routine test.

17. KPI - Maintain records of process documents like PTW, UA/UC, calibration and maintenance of test trolleys.

18.Communicate feedback and lessons learnt to Assembly & Testing engineers.

19.Identify and drive Digitalization topics within area of responsibility to enhance and optimize the processes.

Qualification:

1.Degree Electrical Engineer with 6 to 8 years of experience or Diploma Electrical Engineer with 8 to 10 years of experience MV panel testing of AIS switchgear Products.

2.Preference for Electrical Safety Diploma.

3.Exposure to Field services or commissioning activities at sites will be an added advantage.

Skills:

1.Must have excellent verbal, written communication, and presentation skills to communicate technical information within Siemens.

2.Competent with Microsoft Office suite (Excel, Word, PowerPoint, etc.)

3.Good understanding required about EHS guideline to be followed during electrical / mechanical testing.

4.Must exhibit a high level of motivation and energetic approach to job duties and team management

• Planning & performing routine testing of circuit breakers as per relevant IEC & IS standards and customer requirements to ensure good quality products.
• Planning & execution of testing manpower as per the priority of testing & dispatches.
• Providing necessary training & input to the workmen related to new products to ensure maximum quality output.
• Troubleshooting & solving the issues that arise during routine testing of CBs and informing the vendor to avoid future occurrences.
• Providing input to the Process Planning dept. for tools, fixtures, & testing equipment required during testing to improve the quality of work & output.
• Entry of attendance records of the workmen in SAP.

• Ensure readiness of the breakers before customer inspections.
• Responsible for export & domestic customer inspections.
• Submission of compliance & incorporation of necessary changes suggested by the customer during inspection and ensuring the same in the breaker before dispatch.
• Preparation & submission of inspection reports, MOM, breaker witnessed reports, RTC's to the customer, along with calibration report, bought-out component TC's & relevant IEC & IS standards to the customer if required.
• Visiting the customer office (MSEDCL, PGCIL) for obtaining the inspection clearance.
• Taking customer feedback through customer feedback forms & communicating the customer suggestion to the QM.

• Providing necessary support to the customer dept. for resolving the site issue.
• For small site issues, providing the necessary procedures, instructions, and pictures to the customer for sorting the issues.
• Visiting the site export & domestic for attaining & resolving serious issues & providing feedback to concerned dept. regarding failure & discussion of CAPA to avoid the same in future.
• Providing support to the customer service dept. by direct interaction with the customer or service franchisee by telephone conversation and presentation emails of methods/trainings.

• Visit to vendor depends upon the feedback from shop floor & providing input to the vendor for improvements.
• Vendor audits along with quality incoming & follow up with vendors for compliance.
• Incorporation of checkpoints & checklists at the manufacturing process at vendor end.

• Providing feedback to the concerned SOE engineer regarding drawing related issues.
• Providing feedback to manufacturing team regarding upcoming issues, thus planning for rectification from manufacturing or vendor side.
• Attending daily production meetings for understanding priority and other important points of breakers in process and their respective dispatches.
• Reporting of serious quality issues of materials to incoming department and thus sending defective materials/parts for & working on root cause analysis of same.
• Providing full assistance to design team for technical inputs and testing of circuit breaker.
• Supporting Product Development department for in-house routine testing of Circuit breakers for M1 & M2 type test conducted by ERDA.
• Providing desired inputs in ECM meetings and thus giving the same input to the team, about the changes made.
• Providing assistance to export team for breaker testing data and its test reports.
• Involving Process planning team for development of fixtures, tools, and testing instruments.

• Month wise generation of MIS, FPY & DPT reports, thus taking immediate & necessary actions for respective improvements.
• Preparing, maintaining, tracking & updating calibration of measuring & testing instruments.
• Maintaining audit reports like OHSAS, QMS, etc., and other MOM's like with vendors & clients.
• Regular generation, submission & uploading of Breaker RTC's as per requirement.

• B.E/B.Tech with 5+ years of experience or Diploma with 10+ years of experience.

Qualifications and Skills

• Familiarity with statistical process control to foster continuous improvement in manufacturing processes and product quality.
• Understanding of quality management systems to maintain excellence in organizational processes and customer satisfaction.
• Knowledge of lean manufacturing concepts to enhance process efficiency and minimize waste effectively in the production environment.
• Ability to perform non-destructive testing techniques for ensuring product quality and reliability in compliance with industry standards.
• Experience or foundational knowledge in testing and evaluating rubber for distinct industry applications and product development.
• Proficiency in sample collection from factory environments to ensure quality compliance and adherence to predefined standards.
• Capable of conducting thorough quality control activities to verify product conformity and maintain high-quality benchmarks.
• Effective communication and problem-solving skills to address quality concerns with relevant stakeholders and facilitate improvements.

Roles and Responsibilities

• Conduct routine quality checks on raw materials and finished products to maintain standards and ensure customer satisfaction.
• Implement quality control procedures and processes aligned with QMS to uphold product quality and safety requirements.
• Collaborate with production teams to address quality issues and introduce corrective actions for continuous process improvements.
• Prepare detailed reports on quality findings and recommend strategic adjustments for superior production outcomes.
• Perform audits on production processes and quality management practices to identify areas for enhancement and operational efficiency.
• Monitor production environments to prevent defects and ensure adherence to established quality parameters.
• Identify root causes of quality deviations and work collaboratively with cross-functional teams to develop effective solutions.
• Keep abreast of industry best practices and technological advancements in quality control to drive innovation across operational functions.

The QC Engineer (Civil/MEP) is responsible for ensuring that construction activities comply with technical specifications, standards, and client requirements. The role involves conducting inspections, material testing, and reviewing documentation to ensure quality control throughout the project lifecycle.

Key Responsibilities:

For Civil QC:

Inspect ongoing civil works such as RCC, brickwork, plastering, waterproofing, and finishing to ensure compliance with drawings and quality standards.

Verify formwork, rebar, concrete mix, and curing processes.

Monitor third-party testing of materials like cement, sand, aggregates, bricks, and concrete.

Ensure proper documentation of material approvals, inspection requests (IRs), and non-conformance reports (NCRs).

For MEP QC:

Inspect installation of HVAC, electrical panels, plumbing systems, fire-fighting, and other MEP services.

Verify testing and commissioning of MEP systems as per design and safety standards.

Ensure correct routing, cable management, pipe sizing, insulation, and earthing practices are followed.

Check and verify materials as per approved make and technical submittals.

Common QC Duties:

Coordinate with contractors and consultants for inspections and approvals.

Maintain and update quality checklists, logs, and QA/QC reports.

Issue NCRs and follow up on corrective and preventive actions (CAPA).

Support internal and third-party audits and ensure timely closure of observations.

Train site staff and workers on quality best practices and specifications.

Key Skills & Competencies:

Strong knowledge of IS codes, NBC, and standard construction & MEP practices.

Familiar with quality tools and procedures such as checklists, WIR, MIR, NCR, RFI, etc.

Proficient in reading civil/MEP drawings and specifications.

Hands-on experience in site inspections and lab/field testing.

Good communication, documentation, and problem-solving abilities.

Preferred Background:

Real Estate Projects (Residential, Commercial, Mixed-use)

Infrastructure (Hospitals, Hotels, Factories, Malls)

MEP Contracting Firms or PMC.

We are seeking an experienced Quality Control professional to join our team in India. The ideal candidate will have a strong background in quality assurance processes and a proven track record in maintaining high standards of product quality.

• Conduct regular inspections of products to ensure they meet quality standards.
• Develop and implement quality control processes and procedures.
• Analyze quality data and prepare reports to identify trends and areas for improvement.
• Collaborate with production teams to resolve quality issues and enhance product quality.
• Train and mentor team members on quality control practices and standards.
• Ensure compliance with industry regulations and quality assurance standards.

• Bachelor's degree in Engineering, Quality Assurance, or a related field.
• 5-15 years of experience in quality control or quality assurance roles.
• Strong knowledge of quality control methodologies and tools (e.g., Six Sigma, ISO standards).
• Proficiency in statistical analysis and quality inspection techniques.
• Excellent attention to detail and problem-solving skills.
• Effective communication and interpersonal skills to work with cross-functional teams.