668 R D Chemist jobs in India

Job Title : Raw Material & Sand Testing Engineer – Foundry Quality Assurance

Department : Quality

Experience Required : 4–7 years in Foundry/Metallurgical Quality Control

Industry : Foundry / ductile iron/ Metallurgical

Key Responsibilities :

• Incoming Raw Material Inspection :
• Conduct quality checks for raw materials such as pig iron, CRC scrap, ferroalloys, and other additives.
• Inspect and approve/reject incoming CRC scrap based on chemical and physical parameters.
• Sand Testing and Evaluation :
• Perform regular testing of Green Sand , No Bake Sand , and Neno Sand to ensure conformity to process specifications.
• Evaluate sand parameters such as AFS grain fineness, SiO₂ %, Moisture %, Compactability , and Green Strength .
• Chemical Analysis :
• Analyze and monitor ductile iron parameters including:
• %C (Carbon)
• %Si (Silicon)
• %Mn (Manganese)
• %P (Phosphorus)
• %S (Sulfur)
• %Mg (Magnesium)
• %Al (Aluminum)
• %VM (Volatile Matter)
• Hardness & Mechanical Testing :
• Conduct and evaluate Brinell/ Rockwell hardness tests as part of the quality control process.
• Support metallurgical and microstructure evaluation where required.
• Laboratory Standards and Documentation :
• Maintain documentation and test reports as per ISO , NABL , and internal quality standards.
• Ensure all laboratory procedures comply with ISO 9001 , ISO/IEC 17025 and customer audit requirements.
• CML Testing Support :
• Assist in CML (Central Material Lab) testing and analysis for validation of material specifications.
• Audit and Compliance Support :
• Participate in internal and external audits (ISO, NABL, customer audits).
• Prepare, maintain and present relevant audit documents.

Qualifications :

• Diploma / B.Sc in Metallurgy, Mechanical Engineering, chemical, chemistry or related field.
• Minimum 3 years of experience in foundry or material testing lab.
• Hands-on experience with spectrometers, sand testing equipment , and mechanical testing tools .

Job Title: Chemist in Water Purification Plant

Job Description: The Chemist in a water purification plant is responsible for conducting chemical analysis, monitoring water quality, and ensuring the efficiency of water treatment processes. They work to develop and implement strategies to improve water purification methods and maintain compliance with regulatory standards.

• Conduct chemical analysis of water samples
li>Monitor and maintain water quality
• Optimize water treatment processes
• Develop and implement new purification methods
• Ensure compliance with environmental regulations

• Bachelor's degree in Chemistry or related field
• Experience in water treatment or environmental chemistry
• Knowledge of analytical instruments and laboratory techniques
• Strong attention to detail and analytical skills
• Excellent communication and teamwork abilities

• Chemical analysis
• Water quality monitoring
• Regulatory compliance
• Analytical chemistry
• Lab techniques

Summary

Maintain specific quality of water required for a supercritical power plant. Responsible for testing input chemicals, coal; analysis of ash; treatment of all the waste generated in the plant.

Key Responsibilities

1.Maintain the boiler feed and steam parameters as per Original Equipment Manufacturer (OEM) recommendation.

2.Ensure the proper usage of Personal Protective Equipment (PPE) for handling hazardous chemicals. 

3.Ensure proper maintenance and upkeep of membrane as per design.

4.Carry out testing of water and steam parameters as per thermal power requirements. 

5.Carry out testing of chemicals for their purity assessment for use in water treatment plant (Pre-Treatment + D.M. Plant), Reverse osmosis plant, condensate polishing unit and cooling water system, etc. 

6.Possess experience of Water treatment plant (Pre-Treatment + D.M. Plant), R.O water Plant, Chlorination Plant, condensate polishing system, Cooling water system using effluent water with and without cooling tower and having both Open & Closed recirculation system. 

7.Associate in the maintenance work of above plants, up-keeping of laboratory testing equipment, and planning and procurement of chemicals and vendor development to input materials. 

8.Associate in pre-commissioning & post-commissioning activity of Pre-treatment Plant, DM Plant, Chlorination Plant & also in pre-chemical cleaning of the boiler, the Cooling system followed by its passivation/preservation to commercial operation.

9.Handle the types of equipment used in water, oil, & instrumental analysis. 

10.Associate in day-to-day improvement in Quality Management System as per process requirement.

11.Provide new updates on power plant corrosion chemistry. 

12.Attend knowledge-sharing sessions to keep up with the developments in the outer environment.

Job Accountabilities :

• Support shift in charge for shift co-ordination work.
• Priorities the samples for testing.
• Provide right containers to collect samples, identifies right carriers to distribute samples and designate right location for pre-testing storage.
• Ensure the usability of the chemicals / standards to use in the test and performs the test by following the procedure step by step. Confirms test results by using validation techniques before reporting.
• Calibration -

1. Identify the calibrations as per the method protocol and the instruments as per schedule.

2. Prepare calibration and working standards as per requirement.

3. Perform the calibrations as per the method and instrument as per schedule. Standardizes the laboratory solutions.

• Evaluates performance of additives and process chemicals.
• Collects samples of raw materials as per the requirement and track the quality of incoming raw material.
• Timely testing and results reporting of Raw materials, in process, product & trouble shooting samples of all plants.
• Classify the product grades based on the specification.
• Detect exceptions or deviations in test results
• Perform on-spot mitigation in emergency situation under the guidance of the section head
• Ensure proper sample retention as per defined lab procedure for addressing issues with customers (need based)
• Dispose left over samples safely as per SOP and co-ordinate with plant and other agencies for further actions.
• Awareness about Laboratory Quality Systems requirements and good knowledge and skills for LIMS and SAP QM operations for day to day laboratory work.
• Maintain laboratory inventory (Reagents, Glassware, and Equipment) and raise the requirement for its availability in time.
• Participate in various audits of lab quality systems including safety.
• Data Management
• Comply to quality systems
• Ensure timely entry approval of test results in LIMS.
• HSE & other regulatory compliance
• Stay aware of environmental, site, statutory regulations.
• Handle chemicals and tools as per safety norms
• Ensure Good Housekeeping and safe working conditions
• Follow and enforce applicable HSE procedures/ practices
• Learning & mentoring
• Conduct on job training to analysts and new joiners for laboratory analytical work.
• Business / Function-specific Competencies (Technical /Functional)
• Participate in external trainings and events as advised by the section head
• Timely execution of assigned tasks
• Erratic changes in plans
• Working with multiple interface such as business, customers, operations, E&M and HSEF
• Sample management
• Prioritization of assigned activities
• HSEF -specific Competencies
• Fire Safety Management
• Fire & Gas Detection system
• Waste Management
• Integrated Management System
• RIL HSE Management System
• HSE Policy, Principles, Standards and Procedures & Practices
• Emergency Preparedness and response

Skills :

• Statistical Skill required assessing the reliability of test results.
• Relevant knowledge of the test procedure and results reporting as per standard method requirement.
• Knowledge of Raw Material, in process samples & finished product specifications and analysis as per contractual & domestic specifications.
• Competency to operate specific equipment, perform test, calibrations and evaluate results.
• Knowledge of significance of test parameters including safety in laboratory.

Education & Experience : B. Sc. Chemistry, Masters preferred. Minimum 4-9 years in QA/QC discipline

The mission of the Kandla laboratory department is to build a more efficient service delivery, to fulfil customers’ needs, with implementation of COTECNA QMS.

Chemist will have the responsibility to apply required standard methodology, maintaining TAT, accuracy in reported results, operation, and verification of equipment and functional of it.

Key Responsibilities

Qualifications, Experience and Technical Skills

This is where you save and sustain lives

At Baxter, we are deeply connected by our mission. No matter your role at Baxter, your work makes a positive impact on people around the world. You'll feel a sense of purpose throughout the organization, as we know our work improves outcomes for millions of patients.

Baxter's products and therapies are found in almost every hospital worldwide, in clinics and in the home. For over 85 years, we have pioneered significant medical innovations that transform healthcare.

Together, we create a place where we are happy, successful and inspire each other. This is where you can do your best work.

Join us at the intersection of saving and sustaining lives—where your purpose accelerates our mission.

To perform the cleanliness of area and machines before starting the filling process.

To perform CIP/SIP of machine before commencing the filling activity.

To perform availability of Batch filling record before fill the filling activity.

To perform the compliance of environmental conditions before commencing the filling activity.

To perform the line clearance from IPQA before commencing the filling activity.

To run the machine as per approved SOP and in compliance with cGMP

To record all the activities in the approved formats at the time of observation/activity is performed. 

Job description

px; background-color: rgb(255, 255, 255);">Job description - 

Job Title : Raw Material & Sand Testing Engineer – Foundry Quality Assurance

Department : Quality

Experience Required : 4–7 years in Foundry/Metallurgical Quality Control

Industry : Foundry / ductile iron/ Metallurgical

Key Responsibilities :

• Incoming Raw Material Inspection :
• Conduct quality checks for raw materials such as pig iron, CRC scrap, ferroalloys, and other additives.
• Inspect and approve/reject incoming CRC scrap based on chemical and physical parameters.
• Sand Testing and Evaluation :
• Perform regular testing of Green Sand , No Bake Sand , and Neno Sand to ensure conformity to process specifications.
• Evaluate sand parameters such as AFS grain fineness, SiO₂ %, Moisture %, Compactability , and Green Strength .
• Chemical Analysis :
• Analyze and monitor ductile iron parameters including:
• %C (Carbon)
• %Si (Silicon)
• %Mn (Manganese)
• %P (Phosphorus)
• %S (Sulfur)
• %Mg (Magnesium)
• %Al (Aluminum)
• %VM (Volatile Matter)
• Hardness & Mechanical Testing :
• Conduct and evaluate Brinell/ Rockwell hardness tests as part of the quality control process.
• Support metallurgical and microstructure evaluation where required.
• Laboratory Standards and Documentation :
• Maintain documentation and test reports as per ISO , NABL , and internal quality standards.
• Ensure all laboratory procedures comply with ISO 9001 , ISO/IEC 17025 and customer audit requirements.
• CML Testing Support :
• Assist in CML (Central Material Lab) testing and analysis for validation of material specifications.
• Audit and Compliance Support :
• Participate in internal and external audits (ISO, NABL, customer audits).
• Prepare, maintain and present relevant audit documents.

Qualifications :

• Diploma / B.Sc in Metallurgy, Mechanical Engineering, chemical, chemistry or related field.
• Minimum 3 years of experience in foundry or material testing lab.
• Hands-on experience with spectrometers, sand testing equipment , and mechanical testing tools .