10,604 System Design jobs in India

System Design Engineer

Bengaluru, Karnataka ALTEN India

Posted 17 days ago

Job Viewed

Tap Again To Close

Job Description

System Designer (SD)

Key accountabilities

  • Analyse and translate gas turbine product requirements into a set of validated functional requirements for the control sub-systems.
  • Capture applicable design constraints (must meet conditions, such as safety attributes) and quality attributes (may be traded) that apply to the system.
  • Design the control sub-systems to meet the functional requirements and design constraints.
  • Analyse functional behaviour, which may include modelling and simulation to demonstrate that the design meets the functional requirements.
  • Liaise with other disciplines to understand functional performance capabilities of hardware components of the system to facilitate effective requirements specification.
  • Present in Design review gates and get agreement from senior stakeholders/approvers
  • Ensure robust designs and problem solutions through the effective application of appropriate engineering tools and applicable processes.
  • Produce reports where to document the work carried out and specifications produced

Key experience / qualifications

  • Working knowledge of engine and airframe interfaces, engine component technology and behaviour during normal and abnormal operation, verification vehicles, controls sub-system design, system architecture, software and/or hardware architecture, and software and hardware development process constraints.
  • A working appreciation of associated engineering disciplines.
  • An ability to interpret test results and provide an informed opinion or conclusion as to the outcome of the analysis. This includes an understanding of measurement uncertainty.
  • Demonstrated ability to manage tasks to completion ensuring that the relevant areas of the engineering team are appropriately consulted/informed.
  • Good presentation and communication skills is essential
  • Appreciation of aerospace industry standards and working practices (ARP4754A, ARP4761 etc.)

Tools/Methodologies used:

  • Requirements management: DOORs, PTC Integrity
  • System Modelling: Matlab/Simulink, SysML
This advertiser has chosen not to accept applicants from your region.

System Design Engineer

Bengaluru, Karnataka ALTEN India

Posted 2 days ago

Job Viewed

Tap Again To Close

Job Description

System Designer (SD)

Key accountabilities

  • Analyse and translate gas turbine product requirements into a set of validated functional requirements for the control sub-systems.
  • Capture applicable design constraints (must meet conditions, such as safety attributes) and quality attributes (may be traded) that apply to the system.
  • Design the control sub-systems to meet the functional requirements and design constraints.
  • Analyse functional behaviour, which may include modelling and simulation to demonstrate that the design meets the functional requirements.
  • Liaise with other disciplines to understand functional performance capabilities of hardware components of the system to facilitate effective requirements specification.
  • Present in Design review gates and get agreement from senior stakeholders/approvers
  • Ensure robust designs and problem solutions through the effective application of appropriate engineering tools and applicable processes.
  • Produce reports where to document the work carried out and specifications produced

Key experience / qualifications

  • Working knowledge of engine and airframe interfaces, engine component technology and behaviour during normal and abnormal operation, verification vehicles, controls sub-system design, system architecture, software and/or hardware architecture, and software and hardware development process constraints.
  • A working appreciation of associated engineering disciplines.
  • An ability to interpret test results and provide an informed opinion or conclusion as to the outcome of the analysis. This includes an understanding of measurement uncertainty.
  • Demonstrated ability to manage tasks to completion ensuring that the relevant areas of the engineering team are appropriately consulted/informed.
  • Good presentation and communication skills is essential
  • Appreciation of aerospace industry standards and working practices (ARP4754A, ARP4761 etc.)

Tools/Methodologies used:

  • Requirements management: DOORs, PTC Integrity
  • System Modelling: Matlab/Simulink, SysML
This advertiser has chosen not to accept applicants from your region.

System Design Engineer

Bangalore, Karnataka ALTEN India

Posted today

Job Viewed

Tap Again To Close

Job Description

System Designer (SD)

Key accountabilities

  • Analyse and translate gas turbine product requirements into a set of validated functional requirements for the control sub-systems.
  • Capture applicable design constraints (must meet conditions, such as safety attributes) and quality attributes (may be traded) that apply to the system.
  • Design the control sub-systems to meet the functional requirements and design constraints.
  • Analyse functional behaviour, which may include modelling and simulation to demonstrate that the design meets the functional requirements.
  • Liaise with other disciplines to understand functional performance capabilities of hardware components of the system to facilitate effective requirements specification.
  • Present in Design review gates and get agreement from senior stakeholders/approvers
  • Ensure robust designs and problem solutions through the effective application of appropriate engineering tools and applicable processes.
  • Produce reports where to document the work carried out and specifications produced

Key experience / qualifications

  • Working knowledge of engine and airframe interfaces, engine component technology and behaviour during normal and abnormal operation, verification vehicles, controls sub-system design, system architecture, software and/or hardware architecture, and software and hardware development process constraints.
  • A working appreciation of associated engineering disciplines.
  • An ability to interpret test results and provide an informed opinion or conclusion as to the outcome of the analysis. This includes an understanding of measurement uncertainty.
  • Demonstrated ability to manage tasks to completion ensuring that the relevant areas of the engineering team are appropriately consulted/informed.
  • Good presentation and communication skills is essential
  • Appreciation of aerospace industry standards and working practices (ARP4754A, ARP4761 etc.)

Tools/Methodologies used:

  • Requirements management: DOORs, PTC Integrity
  • System Modelling: Matlab/Simulink, SysML

This advertiser has chosen not to accept applicants from your region.

System Design Engineer

Bengaluru, Karnataka ALTEN India

Posted today

Job Viewed

Tap Again To Close

Job Description

System Designer (SD)

Key accountabilities

  • Analyse and translate gas turbine product requirements into a set of validated functional requirements for the control sub-systems.
  • Capture applicable design constraints (must meet conditions, such as safety attributes) and quality attributes (may be traded) that apply to the system.
  • Design the control sub-systems to meet the functional requirements and design constraints.
  • Analyse functional behaviour, which may include modelling and simulation to demonstrate that the design meets the functional requirements.
  • Liaise with other disciplines to understand functional performance capabilities of hardware components of the system to facilitate effective requirements specification.
  • Present in Design review gates and get agreement from senior stakeholders/approvers
  • Ensure robust designs and problem solutions through the effective application of appropriate engineering tools and applicable processes.
  • Produce reports where to document the work carried out and specifications produced

Key experience / qualifications

  • Working knowledge of engine and airframe interfaces, engine component technology and behaviour during normal and abnormal operation, verification vehicles, controls sub-system design, system architecture, software and/or hardware architecture, and software and hardware development process constraints.
  • A working appreciation of associated engineering disciplines.
  • An ability to interpret test results and provide an informed opinion or conclusion as to the outcome of the analysis. This includes an understanding of measurement uncertainty.
  • Demonstrated ability to manage tasks to completion ensuring that the relevant areas of the engineering team are appropriately consulted/informed.
  • Good presentation and communication skills is essential
  • Appreciation of aerospace industry standards and working practices (ARP4754A, ARP4761 etc.)

Tools/Methodologies used:

  • Requirements management: DOORs, PTC Integrity
  • System Modelling: Matlab/Simulink, SysML
This advertiser has chosen not to accept applicants from your region.

System Design Engineer

Bangalore, Karnataka ALTEN India

Posted 15 days ago

Job Viewed

Tap Again To Close

Job Description

System Designer (SD)

Key accountabilities

  • Analyse and translate gas turbine product requirements into a set of validated functional requirements for the control sub-systems.
  • Capture applicable design constraints (must meet conditions, such as safety attributes) and quality attributes (may be traded) that apply to the system.
  • Design the control sub-systems to meet the functional requirements and design constraints.
  • Analyse functional behaviour, which may include modelling and simulation to demonstrate that the design meets the functional requirements.
  • Liaise with other disciplines to understand functional performance capabilities of hardware components of the system to facilitate effective requirements specification.
  • Present in Design review gates and get agreement from senior stakeholders/approvers
  • Ensure robust designs and problem solutions through the effective application of appropriate engineering tools and applicable processes.
  • Produce reports where to document the work carried out and specifications produced

Key experience / qualifications

  • Working knowledge of engine and airframe interfaces, engine component technology and behaviour during normal and abnormal operation, verification vehicles, controls sub-system design, system architecture, software and/or hardware architecture, and software and hardware development process constraints.
  • A working appreciation of associated engineering disciplines.
  • An ability to interpret test results and provide an informed opinion or conclusion as to the outcome of the analysis. This includes an understanding of measurement uncertainty.
  • Demonstrated ability to manage tasks to completion ensuring that the relevant areas of the engineering team are appropriately consulted/informed.
  • Good presentation and communication skills is essential
  • Appreciation of aerospace industry standards and working practices (ARP4754A, ARP4761 etc.)

Tools/Methodologies used:

  • Requirements management: DOORs, PTC Integrity
  • System Modelling: Matlab/Simulink, SysML
This advertiser has chosen not to accept applicants from your region.

System Design Engineer

Bengaluru, Karnataka ALTEN India

Posted today

Job Viewed

Tap Again To Close

Job Description

System Designer (SD)

Key accountabilities

  • Analyse and translate gas turbine product requirements into a set of validated functional requirements for the control sub-systems.
  • Capture applicable design constraints (must meet conditions, such as safety attributes) and quality attributes (may be traded) that apply to the system.
  • Design the control sub-systems to meet the functional requirements and design constraints.
  • Analyse functional behaviour, which may include modelling and simulation to demonstrate that the design meets the functional requirements.
  • Liaise with other disciplines to understand functional performance capabilities of hardware components of the system to facilitate effective requirements specification.
  • Present in Design review gates and get agreement from senior stakeholders/approvers
  • Ensure robust designs and problem solutions through the effective application of appropriate engineering tools and applicable processes.
  • Produce reports where to document the work carried out and specifications produced

Key experience / qualifications

  • Working knowledge of engine and airframe interfaces, engine component technology and behaviour during normal and abnormal operation, verification vehicles, controls sub-system design, system architecture, software and/or hardware architecture, and software and hardware development process constraints.
  • A working appreciation of associated engineering disciplines.
  • An ability to interpret test results and provide an informed opinion or conclusion as to the outcome of the analysis. This includes an understanding of measurement uncertainty.
  • Demonstrated ability to manage tasks to completion ensuring that the relevant areas of the engineering team are appropriately consulted/informed.
  • Good presentation and communication skills is essential
  • Appreciation of aerospace industry standards and working practices (ARP4754A, ARP4761 etc.)

Tools/Methodologies used:

  • Requirements management: DOORs, PTC Integrity
  • System Modelling: Matlab/Simulink, SysML
This advertiser has chosen not to accept applicants from your region.

Cab System design Engineer

Thiruvallur, Kerala Caterpillar, Inc.

Posted 4 days ago

Job Viewed

Tap Again To Close

Job Description

**Career Area:**
Engineering
**Job Description:**
**Your Work Shapes the World at Caterpillar Inc.**
When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it.
This position involves an engineering role within the Cabin System & Components department to support CIPL build cabs. The responsibilities include fulfilling factory requirements related to cab design from start to finish.
The scope extends beyond cab design to acting as a primary contact in CIPL, with responsibility for CPPD, reliability concerns, AQE, NPI build, resourcing, and localization. The role requires coordination with the relevant product group manager and L6 engineers, as well as collaboration with cross-functional teams such as SCM, Manufacturing, SDE, and SQE to ensure design requirements are met.
Core skill requirements:
Strong Knowledge of Structure design
+ Must be aware of CIPL facility process.
+ Must be aware of APQP, DMFEA, DMIAC approach, PPAP, WPS and PQR
+ Hands on Experience in Design principle, ISO standards for validation, Knowledge on tooling, manufacturing process, Paint process for cab.
+ Creo FEA analysis will be added advantage.
+ Should be able to read, understand and interpret the FEA reports,
+ Candidate must have strong technical expertise to develop new design concepts/ proposals and drive decisions - with appropriate data facts & Logics.
+ Must be able to work with Suppliers, Buyers, provide engineering support required to develop the parts.
+ Must be a good team player, provide technical supports in day -day activities,
+ Strong knowledge of Geometric Dimensioning & Tolerancing (GD &T) and Tolerance Stack up analysis.
+ Should be able to take individual design decisions.
+ Excellent communication and interpersonal skills
Qualification requirement:
+ Post-Graduation / master's degree / bachelor's degree in engineering (Mechanical/ Production/Automobile)
+ Ability to travel domestically and internationally as the need arises.
+ SIX SIGMA Green belt will be added advantage.
Software proficiency:
Expert level - Creo (Solid modelling, Sheet metal etc.) Expert Level - Team centre or equivalent PLM tool
Work experience:
+ Relevant work experience of min. 10 years
+ Must have a record of delivering min.2+ Cabin/Machine Design from concept to production.
+ Must have worked on CIPL.
+ Must understand various mechanical systems and relations between system/components and their failure modes.
+ Should have involved in resolving the field failures / part fit up issue etc.
+ Should have worked on reverse engineering projects.
+ Handled few costs saving or Quality improvement projects.
+ Technical ability to collaborate across organizational/ sub-system team.
+ Excellent communication and interpersonal skills.
Skill Descriptors
Analytical Thinking: Knowledge of techniques and tools that promote effective analysis; ability to determine the root cause of organizational problems and create alternative solutions that resolve these problems.
- Approaches a situation or problem by defining the problem or issue and determining its significance.
- Makes a systematic comparison of two or more alternative solutions.
- Uses flow charts, Pareto charts, fish diagrams, etc. to disclose meaningful data patterns.
Effective Communications: Understanding of effective communication concepts, tools and techniques; ability to effectively transmit, receive, and accurately interpret ideas, information, and needs through the application of appropriate communication behaviors.
- Delivers helpful feedback that focuses on behaviors without offending the recipient.
- Listens to feedback without defensiveness and uses it for own communication effectiveness.
- Makes oral presentations and writes reports needed for own work.
Technical Excellence: Knowledge of a given technology and various application methods; ability to develop and provide solutions to significant technical challenges.
- Provides effective technical solutions to routine functional challenges via sound technical competence, effectively examining implications of events and issues.
- Effectively performs the technical job aspects, continuously building knowledge and keeping up-to-date on technical and procedural job components.
Relocation is available for this position.
**Posting Dates:**
September 2, 2025 - September 11, 2025
Caterpillar is an Equal Opportunity Employer. Qualified applicants of any age are encouraged to apply
Not ready to apply? Join our Talent Community ( .
This advertiser has chosen not to accept applicants from your region.
Be The First To Know

About the latest System design Jobs in India !

Lead System Design Engineer

Uttar Pradesh, Uttar Pradesh GE Vernova

Posted 16 days ago

Job Viewed

Tap Again To Close

Job Description

**Job Description Summary**
Become part of a winning team and help to deliver the Green Energy transition
**Job Description**
In this position, you will be mainly involved in design and engineering of SVC and STATCOM solutions in close coordination with various engineering team globally. As a key member of team, you will be responsible for designing of Flexible AC Transmission Systems (FACTS) solution for global projects & tenders.
**Role & Responsibility**
+ Specify and implement grid/transmission system modelling as well as SVC and STATCOM system modelling in most common simulation environment (PSCAD, PSSE).
+ Perform the various power system studies like load flow, short circuit, transient stability and switching transients, insulation coordination, simulation of temporary and transient overvoltage stresses on equipment and surge arrester energy ratings.
+ Developing scripts to automate execution and analysis of simulations
+ Co-operation and working closely with the ITO (sales) team to understand and being able to find the most feasible solution that customers are seeking for.
+ Support technical tendering, review and approve technical specifications, plans and estimations.
+ Support in research and development tasks in the field of FACTS NPI. Organize and participate in innovation workshops, contribute in patent applications
**Required Qualification**
+ A bachelor's degree in electrical engineering or related discipline with 5-15 years' experience in power system study and modelling of electrical network.
+ Design experience in HV and MV applications with good knowledge of electrical/power engineering.
+ Understanding of power system analysis (e.g. system performance analysis and grid code compliance studies).
+ Experience on simulation tools (PSCAD, DigSilent, PSS/E, ATP or similar).
+ Strong oral and written communication skills in English
**Desire qualification**
+ Proficiency in PSSE simulation tools will be an added advantage.
+ Experience in international projects with working exposure of international, national and customer specific standards in electricity.
+ Knowledge of power electronics devices and modelling of electrical network in HV/EHV system like HVDC & FACTS.
The North Europe Grid System Integration (GSI) team delivers a wide range of turnkey high voltage AC and DC transmission projects to its Customers in the UK, Ireland, and Scandinavia.
Grid Solutions, a GE Vernova business, serves customers globally with over 20,000 employees. We provide power utilities and industries worldwide with equipment, systems and services to bring power reliably and efficiently from the point of generation to end power consumers. Grid Solutions is focused on addressing the challenges of the energy transition by enabling the safe and reliable connection of renewable and distributed energy resources to the grid. We electrify the world with advanced grid technologies and accelerate the energy transition.
**About GE Grid Solutions:**
At GE Grid Solutions we are electrifying the world with advanced grid technologies. As leaders in the energy space our goal is to accelerate the transition for a more energy efficient grid to full fill the needs of tomorrow. With a focus on growth and sustainability GE Grid Solutions plays a pivotable role in integrating Renewables onto the grid to drive to carbon neutral. In Grid Solutions we help enable the transition for a greener more reliable Grid. GE Grid Solutions has the most advanced and comprehensive product and solutions portfolio within the energy sector.
**Why we come to work:**
At GE Renewable Energy, our engineers are always up for the challenge - and we're always driven to find the best solution. Our projects are unique and interesting, and you'll need to bring a solution-focused, positive approach to each one to do your best. Surrounded by committed, loyal colleagues, if you can dare to bring your ingenuity and desire to make an impact, you'll be exposed to game-changing, diverse projects that truly allow you to play your part in the energy transition.
**What we offer:**
A key role in a dynamic, international working environment with a large degree of flexibility of work agreements
Competitive benefits, and great development opportunities - including private health insurance.
**Additional Information**
**Relocation Assistance Provided:** Yes
GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.
This advertiser has chosen not to accept applicants from your region.

Jr. System Design Engineer

Mysuru, Karnataka Mindpool Technologies

Posted today

Job Viewed

Tap Again To Close

Job Description

Mindpool Technologies is hiring for Jr. System Design Engineer in Bangalore.


1-2 Years
Bangalore

Responsibilities:

  • Define and own System requirements design from our main Functional domains: ADAS/AD; Body; Cockpit; and Connectivity that exceed our Customer user experience and Cost requirements.
  • Author vehicle electrical system requirements.
  • Model the requirements and check for completeness, consistency, and correctness (INCOSE and MBSE).
  • Relentlessly drive to early life cycle delivery through an agile approach.
  • Provide requirements to develop HW & SW solutions, based on a Service Oriented Architecture (SOA).
  • Design EE System requirements considering Cyber Security and Functional Safety requirements.
  • Develop a culture of collaboration, diversity and inclusion.


Minimum Qualifications:

  • 1 - 3 years of industry experience in EE Architecture design or Electrical Engineering architecture roles.
  • Bachelor in Computer Engineering, Computer Science, or Electrical Engineering.
  • Familiar with CAN, CAN-FD, LIN and Ethernet.
  • Knowledgeable with Electrical/Electronic systems and integration designs.
  • Experience in requirements specification in the automotive environment and good knowledge of INCOSE best practices.
  • Good understanding of typical vehicle EE architectures and automotive development processes.
  • Fluency in English is required, any other European language is an advantage.


Preferred Qualifications:

  • Designed EE platforms or components for Service Oriented Architecture (SOA).
  • Track record experience with the design and requirements of the following complex automotive domains: ADAS/AD; Body; Cockpit; Connectivity, Powertrain and Power Distribution.
  • 3+ years of experience in EE Systems or EE Architecture R&D.
  • Exhibits excellent, clear, and detail-oriented written and verbal communication on highly complex topics.


About Mindpool Technologies:

Mindpool Technologies Limited is one of the renowned development and digital marketing firm with a decade long experience. We design strategies and solutions that are tailored specifically to your business vision. What makes us strong are our diverse expertise and a proven record of working with every industry type. We are powered with a strong team of certified and promising professionals. Our unique approach and innovative thinking have helped many businesses to expand and gain recognition. Accredited with ISO 9001:2015 and ISO/IEC 27001:2013, Mindpool has proven to be a trusted technology partner to our clients by maintaining a high standard of products/service

This advertiser has chosen not to accept applicants from your region.

Senior System Design Engineer

Karnataka, Karnataka Volvo Group

Posted today

Job Viewed

Tap Again To Close

Job Description

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport and infrastructure solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 

Who are we?

The Services & Connectivity group’s role within the Global Truck Technology - Vehicle Technology is to secure the telematics solutions are deployed on all truck brands in a quality assured way. This group will play a vital role for the Group Truck Technology to effectively utilize the potential of Telematics linked solutions like Uptime Services, Fleet Management, Vehicle Tracking, Navigation etc.,.

Services & Connectivity organization will secure connected vehicles supporting the increasing demand for soft products. Connectivity is a key enabler for fleet management, uptime services and advanced vehicle services such as driver assistance, truck specific navigation and fuel reduction, targeting reduced costs as well as increased revenues.

In a Nutshell

As a Lead System Design Engineer you will gain a good understanding of complete System knowledge of Connectivity and detail the logical design of End to End functions, with a good understanding of project scope and delivery timelines, while working in a global environment. The position holder will report to Group Manager - System, Integration & Verification.

Role Description

  • Develop Concepts and Prepare Technical Report (TR) for the Connectivity systems Engineering team.
  • Detailing logical design of End to End functions, and Technical Report as input, in accordance with Connectivity modelling rules
  • Develop the collaboration model including scenarios and message sequence charts for relevant E2E functions
  • Identify and document necessary concept development activities and deliverables in a concept development plan.
  • Identify needed resources/competences to perform the concept development and communicate this to the EPIC Owner
  • Support the EPIC Owner with estimation input and Lead the concept development team.
  • Ensuring that the system development is performed according to defined system development processes and methods.
  • Develop balanced concept alternatives based on input requirements, aligned with technology, platform/system strategies/roadmap, and Test Data results.
  • Recommend and anchor a proposed concept that is aligned with Connectivity/E2E platform committees and the concept team.
  • Support responsible SW and HW developers to be able to deliver requested functionality
  • Requirements

  • BE/BTech/ME/M.Tech in Electrical/Electronics and communication/ engineering with years of experience in embedded software development /functional development / diagnostics area.
  • Over-all knowledge of system development and system verification in automotive or similar domain along with strong ElectricalElectronics engineering knowledge.
  • Experience in working with Requirement Engineering tools like DOORS or System Weaver
  • Knowledge of the Telematics Solutions and E2E functionality
  • Knowledge in Platform Management and Leadership skills
  • Knowledge in Functional Development
  • Pro-active and ability to drive work forward.
  • Ability to do risk management
  • Expert knowledge in Systems engineering
  • Good automotive domain knowledge around Microcontrollers, CAN Protocol, Serial Communication, etc.,
  • Good communication skill (written and verbal) in English.
  • Good to have

  • Genuine interest in Telematics for Automotive domain (GSM, UDP, Truck Knowledge)
  • Knowledge of CAN (e.g. J1939) protocol and Canalyzer, CANoE , AUTOSAR 
  • Good experience in Agile WOW
    Proficiency in Microcontrollers
  • Knowledge of Service areas and System thinking
  • Someone who enjoys working in a Global Organization with cross functional interaction

  • We value your data privacy and therefore do not accept applications via mail. 

    Who we are and what we believe in 
    Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.

    Applying to this job offers you the opportunity to join Volvo Group . Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 

    Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation.

    This advertiser has chosen not to accept applicants from your region.
     

    Nearby Locations

    Other Jobs Near Me

    Industry

    1. request_quote Accounting
    2. work Administrative
    3. eco Agriculture Forestry
    4. smart_toy AI & Emerging Technologies
    5. school Apprenticeships & Trainee
    6. apartment Architecture
    7. palette Arts & Entertainment
    8. directions_car Automotive
    9. flight_takeoff Aviation
    10. account_balance Banking & Finance
    11. local_florist Beauty & Wellness
    12. restaurant Catering
    13. volunteer_activism Charity & Voluntary
    14. science Chemical Engineering
    15. child_friendly Childcare
    16. foundation Civil Engineering
    17. clean_hands Cleaning & Sanitation
    18. diversity_3 Community & Social Care
    19. construction Construction
    20. brush Creative & Digital
    21. currency_bitcoin Crypto & Blockchain
    22. support_agent Customer Service & Helpdesk
    23. medical_services Dental
    24. medical_services Driving & Transport
    25. medical_services E Commerce & Social Media
    26. school Education & Teaching
    27. electrical_services Electrical Engineering
    28. bolt Energy
    29. local_mall Fmcg
    30. gavel Government & Non Profit
    31. emoji_events Graduate
    32. health_and_safety Healthcare
    33. beach_access Hospitality & Tourism
    34. groups Human Resources
    35. precision_manufacturing Industrial Engineering
    36. security Information Security
    37. handyman Installation & Maintenance
    38. policy Insurance
    39. code IT & Software
    40. gavel Legal
    41. sports_soccer Leisure & Sports
    42. inventory_2 Logistics & Warehousing
    43. supervisor_account Management
    44. supervisor_account Management Consultancy
    45. supervisor_account Manufacturing & Production
    46. campaign Marketing
    47. build Mechanical Engineering
    48. perm_media Media & PR
    49. local_hospital Medical
    50. local_hospital Military & Public Safety
    51. local_hospital Mining
    52. medical_services Nursing
    53. local_gas_station Oil & Gas
    54. biotech Pharmaceutical
    55. checklist_rtl Project Management
    56. shopping_bag Purchasing
    57. home_work Real Estate
    58. person_search Recruitment Consultancy
    59. store Retail
    60. point_of_sale Sales
    61. science Scientific Research & Development
    62. wifi Telecoms
    63. psychology Therapy
    64. pets Veterinary
    View All System Design Jobs