28,955 Technical Professionals jobs in India
Technical Professional
Posted today
Job Viewed
Job Description
Title
Technical Professional - Instrumentation
Should be knowledgeable in SPI. Should have experience in preparation of instrument index, IO list, instrument datasheets, Material Requisition, Technical Bid Evaluation.
R
Technical Professional
Posted today
Job Viewed
Job Description
Title:
Technical Professional - Instrumentation
Should be knowledgeable in SPI. Should have experience in preparation of instrument index, IO list, instrument datasheets, Material Requisition, Technical Bid Evaluation.
Technical Professional
Posted today
Job Viewed
Job Description
Title
Technical Professional
Division
KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset
life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.
Summary Section
As part of the electrical engineering team you will be involved in the design of electrical systems for the oil and gas and/or power including renewable energies industries. This may be a conceptual study or front-end engineering design (FEED) or a design execution involving, the procurement of all equipment and detailed drawings for the construction and commissioning of an entire facility.
Responsibilities
- Shall be able to read, understand and implement client specifications / local / international standards
- Shall have good knowledge of electrical equipment like MV/LV Switchgears, transformers, UPS etc.
- Shall be able to prepare technical specifications and datasheets for electrical items with minimum supervision.
- Shall have good understanding of various electrical layouts and shall be able to guide and check work performed by designers
- Shall be able to understand overall power distribution scheme and SLDs
- Shall be able to prepare load list, load calculations, cable sizing, earthing and lighting calculations including preparation of cable schedules and interconnection diagrams
- Shall be aware of and implement relevant HSE aspects while performing assigned tasks
- Working experience in ETAP / SPEL will be an added advantage
- Shall have good written and oral communication skills
- Shall be able to work in multi-cultural environment
Qualifications Including Required Education, Experience, & Skills
- Shall have a Bachelor's Degree (Full Time) in Electrical & Electronics Engineering
- 8 - 12 years of experience in Oil & Gas / industrial projects
Belong. Connect. Grow. with KBR
R
Technical Professional Leader
Posted 5 days ago
Job Viewed
Job Description
Technical Professional Leader
Division:
KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.
Summary Section
As a Lead Process Engineer, under broad direction, supervises and leads a group of engineers. Provides technical direction over a group and is responsible for employee performance appraisals and for coaching and developing junior professionals. Plans, budgets, organizes, and controls an important segment of a very extensive and highly diversified engineering program or an entire engineering program of moderate scope. Job role is responsible for a measurable asset such as an assigned staff and budget.
Responsibilities:
▪ Develops Process Design Basis and Design Philosophies based on scope of work
▪ Reviews / Performs Process Simulations and Guides Process Engineers to perform Process Simulations and develop Heat & Mass Balance as required.
▪ Experience in development of PFDs, PSFDs, P&IDs, C&EDs, Safe charts.
▪ Proven skills in routine process calculations (hydraulics and sizing) and use of process software and inhouse developed spreadsheets.
▪ Experience in Process control configurations and ESD systems, equipment designs such as separators, pumps, compressors, gas treatment units.
▪ Experience in engineering and design of facilities involving Fired Heaters, Heat Exchangers, Columns is preferred.
▪ Experience with Steam, Instrument air, Plant air, Nitrogen, Fuel gas/oil systems, Water systems (Cooling water, Chilled water, Potable water treatments, DM water, Wastewater) Design
▪ Should be familiar with Steam balance ▪ Should be conversant with Compressor hydraulics
▪ Experience in performing relief valve and flare load calculations.
▪ Develops utility balance, UFD and summary for all utilities of a process plant.
▪ Knowledge in offsites which includes tank farm, boilers and power generation. ▪ Knowledge of engineering practices, calculation methods, international standards, codes, specifications, and procedures.
▪ Carry out all the planning, scheduling and coordination required to execute a project.
▪ Coordinate with peers and sub-ordinates involved from other engineering Depts.
▪ Identify and mitigate risks related to performance guarantees, vendor packages scope etc Review of vendor offers, preparation of technical bid analysis.
▪ Evaluates Vendor / Consultant/Licensor offers for Process Packages / Equipment, Specialized Process Engineering Studies etc.
▪ Should be familiar with routine safety studies like HAZOP, HAZID, SIL etc.
▪ Knowledge of Pre commissioning/Commissioning/Operations is an added advantage.
▪ Should have good report writing skills.
Qualifications including Required Education, Experience, & Skills:
▪ Bachelor's degree in Chemical Engineering with 19 to 25 years of experience
▪ Proficient in process engineering software's (HYSYS, Flarenet, Pipenet, Pipesim) is required.
▪ Excellent communication, and interpersonal skills.
▪ Experience in the fields of Oil & Gas, Petrochemical, refinery, Offshore and Utilities & Offsites related to industry.
Belong. Connect. Grow. with KBR!
Sr. Technical Professional
Posted 5 days ago
Job Viewed
Job Description
Sr. Technical Professional
Process Senior EngineerDivision:KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.Summary Section:Senior Process Engineer will be responsible for wide variety of process engineering activities and would assist the lead process engineer to meet project schedule and quality requirements.Responsibilities:▪ Develops Process Design Basis and Design Philosophies based on scope of work.▪ Reviews / Performs Process Simulations and Guides Process Engineers to perform Process Simulations and develop Heat & Mass Balance as required.▪ Experience in development of PFDs, PSFDs, P&IDs, C&EDs, Safe charts.▪ Proven skills in routine process calculations (hydraulics and sizing) and use of process software and in-house developed spreadsheets.▪ Experience in Process control configurations and ESD systems, equipment designs such as separators, pumps, compressors, gas treatment units.▪ Experience in engineering and design of facilities involving Fired Heaters, Heat Exchangers, Columns is preferred.▪ Experience with Steam, Instrument air, Plant air, Nitrogen, Fuel gas/oil systems, Water systems (Cooling water, Chilled water, Potable water treatments, DM water, Wastewater) Design▪ Should be familiar with Steam balance.▪ Should be conversant with Compressor hydraulics.▪ Experience in performing relief valve and flare load calculations.▪ Develops utility balance, UFD and summary for all utilities of a process plant.▪ Knowledge in offsites which includes tank farm, boilers and power generation.▪ Knowledge of engineering practices, calculation methods, international standards, codes, specifications, and procedures.▪ Carry out all the planning, scheduling and coordination required to execute a project.▪ Coordinate with peers and sub-ordinates involved from other engineering Depts.▪ Identify and mitigate risks related to performance guarantees, vendor packages scope etc Review of vendor offers, preparation of technical bid analysis.▪ Evaluates Vendor / Consultant/Licensor offers for Process Packages / Equipment, Specialized Process Engineering Studies etc.▪ Should be familiar with routine safety studies like HAZOP, HAZID, SIL etc.▪ Knowledge of Pre commissioning/Commissioning/Operations is an added advantage.Qualifications including Required Education, Experience, & Skills:▪ Bachelor's degree in chemical engineering with 10 to 15 years of experience▪ Good knowledge in process engineering softwares (HYSYS, Flarenet) is required.▪ Excellent communication, and interpersonal skills.▪ Experience in any of the fields of Oil & Gas, Petrochemical, refinery, Offshore and Utilities & Offsites related to industry.▪ Willingness to travel for work within KBR offices.▪ Experience in FEED/Detail Engineering stages of project.
Belong. Connect. Grow. with KBR!
Sr. Technical Professional
Posted 5 days ago
Job Viewed
Job Description
Sr. Technical Professional
Process Senior EngineerDivision:KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.Summary Section:Senior Process Engineer will be responsible for wide variety of process engineering activities and would assist the lead process engineer to meet project schedule and quality requirements.Responsibilities:▪ Develops Process Design Basis and Design Philosophies based on scope of work.▪ Reviews / Performs Process Simulations and Guides Process Engineers to perform Process Simulations and develop Heat & Mass Balance as required.▪ Experience in development of PFDs, PSFDs, P&IDs, C&EDs, Safe charts.▪ Proven skills in routine process calculations (hydraulics and sizing) and use of process software and in-house developed spreadsheets.▪ Experience in Process control configurations and ESD systems, equipment designs such as separators, pumps, compressors, gas treatment units.▪ Experience in engineering and design of facilities involving Fired Heaters, Heat Exchangers, Columns is preferred.▪ Experience with Steam, Instrument air, Plant air, Nitrogen, Fuel gas/oil systems, Water systems (Cooling water, Chilled water, Potable water treatments, DM water, Wastewater) Design▪ Should be familiar with Steam balance.▪ Should be conversant with Compressor hydraulics.▪ Experience in performing relief valve and flare load calculations.▪ Develops utility balance, UFD and summary for all utilities of a process plant.▪ Knowledge in offsites which includes tank farm, boilers and power generation.▪ Knowledge of engineering practices, calculation methods, international standards, codes, specifications, and procedures.▪ Carry out all the planning, scheduling and coordination required to execute a project.▪ Coordinate with peers and sub-ordinates involved from other engineering Depts.▪ Identify and mitigate risks related to performance guarantees, vendor packages scope etc Review of vendor offers, preparation of technical bid analysis.▪ Evaluates Vendor / Consultant/Licensor offers for Process Packages / Equipment, Specialized Process Engineering Studies etc.▪ Should be familiar with routine safety studies like HAZOP, HAZID, SIL etc.▪ Knowledge of Pre commissioning/Commissioning/Operations is an added advantage.Qualifications including Required Education, Experience, & Skills:▪ Bachelor's degree in chemical engineering with 10 to 15 years of experience▪ Good knowledge in process engineering softwares (HYSYS, Flarenet) is required.▪ Excellent communication, and interpersonal skills.▪ Experience in any of the fields of Oil & Gas, Petrochemical, refinery, Offshore and Utilities & Offsites related to industry.▪ Willingness to travel for work within KBR offices.▪Experience in FEED/Detail Engineering stages of project.
Belong. Connect. Grow. with KBR!
Technical Professional - Piping
Posted 5 days ago
Job Viewed
Job Description
Technical Professional - Piping
Stress Engineer :
It is the responsibility of the Piping Mechanical/Stress Engineer to:
+ Carry out the necessary calculations to ensure that all loading conditions, which may be experienced by a piping system, are considered and catered for, within the design.
+ Ensure that piping systems comply fully with the stress analysis requirements specified
+ Issue approved stress isometrics for critical lines as required.
+ Prepare stress calculations and nozzle loads summaries demonstrating Code compliance and prepare a Stress Analysis Report containing calculations and information for each piping system analyzed (when required by the Client).
+ Confirm that the design of piping, pipe supports, and piping mechanical special piping (SP) items are in accordance with the requirements of the applicable ASME codes, industry standards and all applicable project, client and Company procedures and specifications.
The Candidate shall be able to perform
+ Pipe Stress Analysis Calculations
+ Plant Layout Comments - loads to all other disciplines
+ Piping Mechanical Specifications
+ Special Studies
+ Special Piping (SP) Item Calculations, Drawings, and Data Sheets
+ Special Piping (SP) Item Requisition Worksheets
+ Pipe Support Drawings
+ Pipe Support Requisition Worksheets
+ Pipe Support Locations
Knowledge of Caesar II software to perform flexibility analysis
Knowledge of Support selection and support design , spl support Drawing creation
Should be well verse in Fatigue/Blast, FPSO Hog, Sag and structural consideration
Knowledge of Navis Model / Review Reality is a must
Knowledge of AIV/FIV is preferable
Excellent skill to Guide young engineers to perform the work
Knowledge in Pml macros development will be added advantage
Be The First To Know
About the latest Technical professionals Jobs in India !
Sr. Technical professional
Posted 5 days ago
Job Viewed
Job Description
Sr. Technical professional
Job Profile
ROLE:
Sr. Technical Professional (Furnace Projects)
REPORTS TO:
CTA - Engineering
POSITION DESCRIPTION:
Preparation of Technical Requisition, Project Design Basis, Engineering execution plan Preparation and review of basic design of Primary reformer / Furnace / heater / flare components such as Heater, exchanger design, Pressure part calculations, combustion calculations, Radiant section design, Draft calculation, Tube material selection, sizing, thermal flux calculation, refractory design, convection section design, Ceaser analysis etc Review of Process datasheet, PFD, P&ID, control narratives Interfacing with other Disciplines such as Static, Machinery, Piping, Instrumentation, Electrical, Civil etc Technical Bid Evaluation Participate in 3D Model & Iso-metric Reviews and Hazop studies Visit Vendor Fabrication Shops during manufacturing Visit client Site during Installation and Critical stages of commissioning.
REQUIREMENTS:
+ A graduate Mechanical / Civil engineer with around 12-15 years of experience
+ Must have excellent skillsets and understanding of P&IDs, calculations of Furnace / heater components, PFD, P&ID, Control narratives, Piping Material Specifications, line Lists, isolation and vent/drain philosophies, Tie-Ins, and interface engineering with other disciplines.
+ Experienced and proficient in executing work using intelligent CAD systems like PDMS, E3D & SP3D, Tekla including AutoCAD & MicroStation. Experience in 3D Model reviews, Liquidating Punch Lists, responding to queries with proper technical justification.
+ Ability to perform various Engineering and Project functions such as participating in relevant meetings, establishing change management processes, assist and advise during procurement and execution activities.
+ Good communication skills with sound writing and spoken skills in English. Must be ready to travel based on Project needs (within India and abroad). Flexibility to travel for client meetings / Sites etc - could account for 30% of work time.
KEY RELATIONSHIPS:
Work with different Technology Leads within various KBR Offices
JDE Technical Professional
Posted today
Job Viewed
Job Description
Look for the candidate who has technical exp into JDE , E2E implemenation
Notice Period-60
Locations : Mumbai, Bengaluru, Pune, Chennai, Hyderabad, Kolkata, Delhi NCR (Delhi & Noida), Coimbatore, Mysore, Nagpur, Bhubaneswar, Indore, Warangal, Pan India
Technical Professional Leader
Posted today
Job Viewed
Job Description
Title
Technical Professional Leader
Division
KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.
Summary Section
As a Lead Process Engineer, under broad direction, supervises and leads a group of engineers. Provides technical direction over a group and is responsible for employee performance appraisals and for coaching and developing junior professionals. Plans, budgets, organizes, and controls an important segment of a very extensive and highly diversified engineering program or an entire engineering program of moderate scope. Job role is responsible for a measurable asset such as an assigned staff and budget.
Responsibilities
Develops Process Design Basis and Design Philosophies based on scope of work
Reviews / Performs Process Simulations and Guides Process Engineers to perform Process Simulations and develop Heat & Mass Balance as required.
Experience in development of PFDs, PSFDs, P&IDs, C&EDs, Safe charts.
Proven skills in routine process calculations (hydraulics and sizing) and use of process software and inhouse developed spreadsheets.
Experience in Process control configurations and ESD systems, equipment designs such as separators, pumps, compressors, gas treatment units.
Experience in engineering and design of facilities involving Fired Heaters, Heat Exchangers, Columns is preferred.
Experience with Steam, Instrument air, Plant air, Nitrogen, Fuel gas/oil systems, Water systems (Cooling water, Chilled water, Potable water treatments, DM water, Wastewater) Design
Should be familiar with Steam balance Should be conversant with Compressor hydraulics
Experience in performing relief valve and flare load calculations.
Develops utility balance, UFD and summary for all utilities of a process plant.
Knowledge in offsites which includes tank farm, boilers and power generation. Knowledge of engineering practices, calculation methods, international standards, codes, specifications, and procedures.
Carry out all the planning, scheduling and coordination required to execute a project.
Coordinate with peers and sub-ordinates involved from other engineering Depts.
Identify and mitigate risks related to performance guarantees, vendor packages scope etc Review of vendor offers, preparation of technical bid analysis.
Evaluates Vendor / Consultant/Licensor offers for Process Packages / Equipment, Specialized Process Engineering Studies etc.
Should be familiar with routine safety studies like HAZOP, HAZID, SIL etc.
Knowledge of Pre commissioning/Commissioning/Operations is an added advantage.
Should have good report writing skills.
Qualifications Including Required Education, Experience, & Skills
Bachelor's degree in Chemical Engineering with 19 to 25 years of experience
Proficient in process engineering software's (HYSYS, Flarenet, Pipenet, Pipesim) is required.
Excellent communication, and interpersonal skills.
Experience in the fields of Oil & Gas, Petrochemical, refinery, Offshore and Utilities & Offsites related to industry.
Belong. Connect. Grow. with KBR
R