999 Test Equipment jobs in India

Test Equipment Specialist IV

FORVIA HELLA is a listed international automotive supplier. As a company of the FORVIA Group, FORVIA HELLA stands for high-performance lighting technology and vehicle electronics and, with the Lifecycle Solutions Business Group, also covers a broad service and product portfolio for the spare parts and workshop business as well as for manufacturers of special vehicles. With currently around 36,500 employees at over 125 locations, the Company is active worldwide and generated adjusted sales of €8.1 billion in fiscal year 2024.

YOUR TASKS

Job Objective
Steering, coordination and execution of planning, development and implementation of test equipment as well as
monitoring / maintenance and introduction of improvement measures
Duties and Responsibilities
A Testing
1 Planning, creating and agreeing test concepts (models, set-ups, simulations, test circuits) for components,
sub-assemblies, devices and systems; involvement in/supporting the creation of requirement
specifications and test specifications
2 Planning of test equipment in consideration of Hella regulation, Hella standards and legal requirement
specifications, data sheets and specifications for new products and preparing of quotations together with
internal or external partners
3 Determine and arranging of procurement of needed material, components and systems. Following up the
procurement process to ensure the in time delivery
4 Creating/Changing or arranging creation/change of test software as well as designing test circuits in
agreement with the affected partners
5 Supervising set-up and verification of new test equipment in domestic plant or abroad as well as
arrangement and execution of user trainings
6 Arrangement for creation and updating all relevant documentation
7 Steering and executing in monitoring of the used test equipment in the running production and laboratory
as well as suggestion and implementation of improvement / cost reduction action (continuous
improvement)
8 Involvement in the processing of customer claims and production difficulties in agreement with e. g. quality
department, production, laboratory etc.
9 Daily direct support to production and laboratory for failure analysis, maintenance, repair and calibration
of test equipment and test software together with internal and external partners
B Projecting
1 Leading of project teams for any kind of product / product family related cost improvements

Qualifications:
Education: Engineering in Electronics/Instrumentation Engineering.
Experience: 3-5 years in electrical/electronic panel wiring, vendor management, and procurement.

HELLA India Automotive Pvt Ltd.
Rimsha Shaikh

Job description

What You'll Do

• Eaton is seeking a highly skilled Test Engineer specializing in Automated Test Equipment (ATE) development for MTL and Crouse-Hinds series products. The role demands proficiency in VC++, LabVIEW & Python for source code development, alongside hands-on experience with test measurement instruments utilizing GPIB, USB, and Ethernet communication protocols. Join our team and contribute to innovative testing solutions that drive product excellence.

Key Responsibilities:

• Design, develop, and implement Automated Test Equipment (ATE) systems for Eaton's MTL and Crouse-Hinds series products.
• Develop and debug test source codes using VC++ and LabVIEW platforms.
• Interface with test measurement instruments using GPIB, USB, and Ethernet communication protocols for automated testing purposes.
• Collaborate with NPI, Engineering and Quality assurance teams to define testing parameters and ensure compliance with product requirements.
• Perform hardware (Relay based PCB, Multiplexer controller, High voltage relay cards) and software troubleshooting to enhance test accuracy and system reliability.
• Conduct data analysis in Breakdown log & implement Kaizens to improve testing efficiency and streamline workflows.
• Meet Functional metrics of Preventive Maintenance adherence, MTTR, MTBF and OEE
• Document test procedure, Software release for Audits.
• Stay updated on emerging technologies and testing methodologies to enhance ATE capabilities.

Additional Responsibilities

• Development of Test Strategies: Define and implement test strategies to validate the performance and reliability of MTL and Crouse-Hinds series products.
• Maintenance of Test Equipment: Perform regular calibration and maintenance of test equipment, Test fixture to ensure accurate and consistent results.
• Test System Integration: Collaborate with hardware and software engineers to integrate test systems into production lines seamlessly.
• Automation Enhancement: Identify opportunities to enhance automation in testing processes to reduce manual intervention and improve efficiency.
• Cost Optimization: Focus on cost-effective test solutions without compromising quality or accuracy.
• Training and Support: Train production teams, new joiners on test equipment usage and troubleshooting, providing technical support as needed.
• Compliance Testing: Ensure that test setups meet all relevant industry standards and regulatory requirements.
• Risk Analysis: Conduct risk assessments for new test setups to predict and mitigate potential failures.
• Data Management: Manage version control of test software repositories in Server. Analyze test data to identify lags/delays, speed up and optimize processes, and support decision-making.
• Collaboration on Design Improvements: Provide feedback to design teams based on test results to improve product performance and manufacturability.

Qualifications

• Bachelor's degree in Electrical, Electronics & Instrumentation Enginering
• 10-12 years of experience in developing and maintaining Automated Test Equipment (ATE) & Process control Instruments.

Skills

• Expertise in VC++ and LabVIEW with significant hands-on source code development and debugging experience for product testing.
• Proficiency in interfacing and working with test measurement instruments using GPIB, USB, and Ethernet protocols.
• Solid understanding of hardware systems and test integration methodologies.
• Familiarity with industrial safety standards and compliance guidelines for Eaton's MTL and Crouse-Hinds series.
• Knowledge of industrial automation and system-level testing protocols.
• Strong analytical skills and problem-solving abilities.
• Effective communication and teamwork skills.

Unspecified

Overview:

In this role the Sr Lead Engineer will actively drive the design and development of test equipment hardware, review or create test engineering artifacts, support estimate preparation, and guide junior engineers on test equipment design and development.

In performing these activities, the Senior Lead Engineer will interface with customers, external suppliers, project managers, engineering managers, mechanical, software, electrical, and systems engineers, as well as the manufacturing organization and report to Test Engineering technical manager.

Position: Senior Lead Engineer (P3), Hardware - Test Equipment

Primary Responsibilities:

Support the engineering organizations in new business pursuits, including customer technical visits, preparation of estimates and RFQ responses. Direct and support design and development of test equipment electrical and mechanical specifications from test system requirements. Manage requirements tracking. Develop/Review test equipment hardware design. Lead the development of Automatic Test Equipment (ATE) hardware from conception through implementation Have good experience in the design and development of interconnect solutions including interface test adapter (ITA). Drive trade studies, prototype creation, design of signal conditioning circuits, simulation for critical design concepts Review/ create test equipment design drawings, schematics, BOM and assembly instructions for ATE as per design specification Develop verification and validation procedures for ATE to ensure system will perform as specified to meet customer and system requirements. Develop systems integration plan and drive cross-functional team efforts in integration, verification, validation, and commissioning of test equipment Review test engineering artifacts like design documents, test plan, user manual and related documents Support the Test Equipment team and SCM in Vendor or Supplier identification for Test equipment build activities.

Skill Sets:

Basic Qualifications:

Collins Aerospace, a Raytheon Technologies company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio and expertise to solve customers’ toughest challenges and to meet the demands of a rapidly evolving global market.

Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement – we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us!

Qualifications and Skills

• Familiarity with statistical process control to foster continuous improvement in manufacturing processes and product quality.
• Understanding of quality management systems to maintain excellence in organizational processes and customer satisfaction.
• Knowledge of lean manufacturing concepts to enhance process efficiency and minimize waste effectively in the production environment.
• Ability to perform non-destructive testing techniques for ensuring product quality and reliability in compliance with industry standards.
• Experience or foundational knowledge in testing and evaluating rubber for distinct industry applications and product development.
• Proficiency in sample collection from factory environments to ensure quality compliance and adherence to predefined standards.
• Capable of conducting thorough quality control activities to verify product conformity and maintain high-quality benchmarks.
• Effective communication and problem-solving skills to address quality concerns with relevant stakeholders and facilitate improvements.

Roles and Responsibilities

• Conduct routine quality checks on raw materials and finished products to maintain standards and ensure customer satisfaction.
• Implement quality control procedures and processes aligned with QMS to uphold product quality and safety requirements.
• Collaborate with production teams to address quality issues and introduce corrective actions for continuous process improvements.
• Prepare detailed reports on quality findings and recommend strategic adjustments for superior production outcomes.
• Perform audits on production processes and quality management practices to identify areas for enhancement and operational efficiency.
• Monitor production environments to prevent defects and ensure adherence to established quality parameters.
• Identify root causes of quality deviations and work collaboratively with cross-functional teams to develop effective solutions.
• Keep abreast of industry best practices and technological advancements in quality control to drive innovation across operational functions.

The QC Engineer (Civil/MEP) is responsible for ensuring that construction activities comply with technical specifications, standards, and client requirements. The role involves conducting inspections, material testing, and reviewing documentation to ensure quality control throughout the project lifecycle.

Key Responsibilities:

For Civil QC:

Inspect ongoing civil works such as RCC, brickwork, plastering, waterproofing, and finishing to ensure compliance with drawings and quality standards.

Verify formwork, rebar, concrete mix, and curing processes.

Monitor third-party testing of materials like cement, sand, aggregates, bricks, and concrete.

Ensure proper documentation of material approvals, inspection requests (IRs), and non-conformance reports (NCRs).

For MEP QC:

Inspect installation of HVAC, electrical panels, plumbing systems, fire-fighting, and other MEP services.

Verify testing and commissioning of MEP systems as per design and safety standards.

Ensure correct routing, cable management, pipe sizing, insulation, and earthing practices are followed.

Check and verify materials as per approved make and technical submittals.

Common QC Duties:

Coordinate with contractors and consultants for inspections and approvals.

Maintain and update quality checklists, logs, and QA/QC reports.

Issue NCRs and follow up on corrective and preventive actions (CAPA).

Support internal and third-party audits and ensure timely closure of observations.

Train site staff and workers on quality best practices and specifications.

Key Skills & Competencies:

Strong knowledge of IS codes, NBC, and standard construction & MEP practices.

Familiar with quality tools and procedures such as checklists, WIR, MIR, NCR, RFI, etc.

Proficient in reading civil/MEP drawings and specifications.

Hands-on experience in site inspections and lab/field testing.

Good communication, documentation, and problem-solving abilities.

Preferred Background:

Real Estate Projects (Residential, Commercial, Mixed-use)

Infrastructure (Hospitals, Hotels, Factories, Malls)

MEP Contracting Firms or PMC.

We are seeking an experienced Quality Control professional to join our team in India. The ideal candidate will have a strong background in quality assurance processes and a proven track record in maintaining high standards of product quality.

• Conduct regular inspections of products to ensure they meet quality standards.
• Develop and implement quality control processes and procedures.
• Analyze quality data and prepare reports to identify trends and areas for improvement.
• Collaborate with production teams to resolve quality issues and enhance product quality.
• Train and mentor team members on quality control practices and standards.
• Ensure compliance with industry regulations and quality assurance standards.

• Bachelor's degree in Engineering, Quality Assurance, or a related field.
• 5-15 years of experience in quality control or quality assurance roles.
• Strong knowledge of quality control methodologies and tools (e.g., Six Sigma, ISO standards).
• Proficiency in statistical analysis and quality inspection techniques.
• Excellent attention to detail and problem-solving skills.
• Effective communication and interpersonal skills to work with cross-functional teams.

Job description

1.On-Line Checks:
○ Perform continuous monitoring of the production line to ensure all products
meet predefined quality parameters.
○ Conduct real-time inspections of products during various stages of production
to identify any defects or deviations.
○ Discuss with production staff to immediately address and correct any
identified issues.
○ Maintain detailed logs of on-line checks, including data on any defects,
corrections made, and overall product quality.
○ Conduct regular inspections to ensure compliance with GMP standards,
focusing on cleanliness, hygiene, and safety within the production area.
○ Monitor employee adherence to GMP protocols, including proper use of
protective gear, hand hygiene, and contamination prevention practices.
○ Identify and report any non-conformities or potential risks observed during
GMP checks.
○ Participate in training sessions to reinforce GMP guidelines and ensure all
staff are up-to-date on best practices.
 2. Finished Goods (FG) Inspections:
○ Carry out thorough inspections of finished goods to verify that they meet all
quality, safety, and customer specifications before shipment.
○ Sensory Analysis of Products.
○ Ensure that packaging and labeling are accurate and meet the company's
branding and regulatory requirements.
○ Maintain records of FG inspections, including batch numbers, inspection
dates, and outcomes, to facilitate traceability.
 3. Raw Material (RM) Checks:
○ Inspect and evaluate incoming raw materials against quality standards and
purchase specifications before they are accepted for production.
○ Conduct sampling and testing of raw materials for quality, consistency, and
compliance with safety standards.
○ Document the quality of incoming materials, including any issues detected,
and work with suppliers to resolve discrepancies.
○ Oversee the proper storage of raw materials to prevent contamination or
degradation, ensuring that storage conditions meet the required standards.
 4. Vehicle Inspections:
○ Inspect vehicles used for transporting raw materials and finished goods to
ensure they are clean, well-maintained, and suitable for the safe transport of
food products.
○ Check that vehicles comply with industry standards for temperature control,
sanitation, and safety during the loading and unloading process.
○ Document vehicle inspection findings, including any necessary maintenance
or cleaning, and coordinate with the logistics team to ensure timely resolution
of issues.
○ Ensure that all vehicles used for transportation meet regulatory and companyspecific hygiene and safety standards.


JD for Quality Control
Qualifications:
 ● Degree in Quality Control, Food Science, or a related field is preferred.
● Minimum of 1 years of experience in quality control, preferably in the food industry.
● Excellent attention to detail with the ability to detect and resolve quality issues
quickly.
● Strong communication skills, both written and verbal, for effective reporting and
collaboration with cross-functional teams.
● Strong problem-solving skills with a proactive approach to identifying and addressing
quality issues.


interested candidates can contact on 
/

We are looking for a Quality Control professional to ensure that our products meet the highest quality standards. The ideal candidate will have 1-3 years of experience in quality control within a manufacturing environment, with a strong focus on continuous improvement.

• Conduct regular quality inspections and audits of products and processes.
• Identify defects and deviations from quality standards and report findings.
• Collaborate with production teams to implement corrective actions for quality issues.
• Maintain accurate records of quality inspections and test results.
• Prepare quality reports and documentation for management review.
• Assist in the development and implementation of quality control policies and procedures.

• Bachelor's degree in Engineering, Science, or a related field.
• Strong understanding of quality control standards and methodologies.
• Familiarity with quality inspection tools and techniques (e.g., Six Sigma, ISO 9001).
• Proficient in data analysis and statistical process control (SPC).
• Excellent attention to detail and problem-solving skills.
• Strong communication and interpersonal skills.
• Ability to work independently and as part of a team.