23 Welding Engineer jobs in India
Welding Engineer
Posted 4 days ago
Job Viewed
Job Description
WELD CELL ENGINEER
JD :
(a) Good knowledge on weld drawing and weld symbols.
(b) Line Balancing. ( Knowledge of cycle time, takt time, lead time)
(c) Knowledge of identifying and implementation of improvement ideas. ( Kaizen & poka-yoke )
(d) Experience in manual and robotic (GMAW MAG) welding and able to do programming of Yaskawa Robot (This skill is must)
(e) Ability to train operator & Manpower manpower handling.
(f) Able to handle robotic welding (Yaskawa-Moto man) Programming and teaching.
(g) Knowledge of productivity and OEE of machine and its calculation.
h) Knowledge of PFD, PFMEA, Control plan and NPD (New project development)
(i) Knowledge of problem-solving tool's ( 7QC tool's)
(j) Knowledge of lean manufacturing process.
(k) Experience in MS office and SAP.
(l) Knowledge of 5's and its implementation on shop floor.
(l) Will be ready to work in shift.
Brief Job Description (In Brief) :
(a) Plan v Actual should be 100 % to achieve OTIF.
(b) Ensuring product quality and reliability by achieving zero Customer rejection.
(c) 5's Implementation on shop floor.
(d) Productivity Improvement.
(e) Rejection analysis and its reduction by implementation of corrective actions.
(f) Continual Improvement.
Welding Engineer
Posted today
Job Viewed
Job Description
WELD CELL ENGINEER
JD :
(a) Good knowledge on weld drawing and weld symbols.
(b) Line Balancing. ( Knowledge of cycle time, takt time, lead time)
(c) Knowledge of identifying and implementation of improvement ideas. ( Kaizen & poka-yoke )
(d) Experience in manual and robotic (GMAW MAG) welding and able to do programming of Yaskawa Robot (This skill is must)
(e) Ability to train operator & Manpower manpower handling.
(f) Able to handle robotic welding (Yaskawa-Moto man) Programming and teaching.
(g) Knowledge of productivity and OEE of machine and its calculation.
h) Knowledge of PFD, PFMEA, Control plan and NPD (New project development)
(i) Knowledge of problem-solving tool's ( 7QC tool's)
(j) Knowledge of lean manufacturing process.
(k) Experience in MS office and SAP.
(l) Knowledge of 5's and its implementation on shop floor.
(l) Will be ready to work in shift.
Brief Job Description (In Brief) :
(a) Plan v Actual should be 100 % to achieve OTIF.
(b) Ensuring product quality and reliability by achieving zero Customer rejection.
(c) 5's Implementation on shop floor.
(d) Productivity Improvement.
(e) Rejection analysis and its reduction by implementation of corrective actions.
(f) Continual Improvement.
Welding Engineer
Posted 3 days ago
Job Viewed
Job Description
JD :
(a) Good knowledge on weld drawing and weld symbols.
(b) Line Balancing. ( Knowledge of cycle time, takt time, lead time)
(c) Knowledge of identifying and implementation of improvement ideas. ( Kaizen & poka-yoke )
(d) Experience in manual and robotic (GMAW MAG) welding and able to do programming of Yaskawa Robot (This skill is must)
(e) Ability to train operator & Manpower manpower handling.
(f) Able to handle robotic welding (Yaskawa-Moto man) Programming and teaching.
(g) Knowledge of productivity and OEE of machine and its calculation.
h) Knowledge of PFD, PFMEA, Control plan and NPD (New project development)
(i) Knowledge of problem-solving tool's ( 7QC tool's)
(j) Knowledge of lean manufacturing process.
(k) Experience in MS office and SAP.
(l) Knowledge of 5's and its implementation on shop floor.
(l) Will be ready to work in shift.
Brief Job Description (In Brief) :
(a) Plan v Actual should be 100 % to achieve OTIF.
(b) Ensuring product quality and reliability by achieving zero Customer rejection.
(c) 5's Implementation on shop floor.
(d) Productivity Improvement.
(e) Rejection analysis and its reduction by implementation of corrective actions.
(f) Continual Improvement.
Welding Engineer
Posted 1 day ago
Job Viewed
Job Description
WELD CELL ENGINEER
JD :
(a) Good knowledge on weld drawing and weld symbols.
(b) Line Balancing. ( Knowledge of cycle time, takt time, lead time)
(c) Knowledge of identifying and implementation of improvement ideas. ( Kaizen & poka-yoke )
(d) Experience in manual and robotic (GMAW MAG) welding and able to do programming of Yaskawa Robot (This skill is must)
(e) Ability to train operator & Manpower manpower handling.
(f) Able to handle robotic welding (Yaskawa-Moto man) Programming and teaching.
(g) Knowledge of productivity and OEE of machine and its calculation.
h) Knowledge of PFD, PFMEA, Control plan and NPD (New project development)
(i) Knowledge of problem-solving tool's ( 7QC tool's)
(j) Knowledge of lean manufacturing process.
(k) Experience in MS office and SAP.
(l) Knowledge of 5's and its implementation on shop floor.
(l) Will be ready to work in shift.
Brief Job Description (In Brief) :
(a) Plan v Actual should be 100 % to achieve OTIF.
(b) Ensuring product quality and reliability by achieving zero Customer rejection.
(c) 5's Implementation on shop floor.
(d) Productivity Improvement.
(e) Rejection analysis and its reduction by implementation of corrective actions.
(f) Continual Improvement.
Welding Engineer -QA &QC
Posted today
Job Viewed
Job Description
Go through complete customer order requirements and attend contract review.
Prepare Quality Documents like ITP, JQR (Job Quality Requirements), NDE Procedures, Material Standard specification inline to Project requirements.
Preparation of WPS/PQR/WPQ as necessary in line with applicable standards EN/ASME/
Set and monitor the welding and Heat treatment activity to comply to international standards EN/ASME/
Work closely with Project Engineering on fixing the quality requirements for each part.
Review Purchase requisitions and ensure complete technical requirements are captured.
Submit Pre-Manufacturing Welding documents to customer as per the agreed timeline.
Support Inside sales for pre-order queries and documents welding.
Work closely with cross functional team & supplier and communicate the project quality requirements thru meetings.
Audit and supplier development and monitoring on the process in line with company's and international standard requirements.
Handling customer complaints and demonstrate the RCA and CAPA effectively.
Ensure all documents are maintained as per QMS & company policy.
Knowledge on PED, CRN, ASME S/U-stamp, API & other certifications valve Industry.
Handled various certification and audits and TPIA Inspections
Knowledge in MS Office
Welding Engineer/ Inspector Saudi Arabia
Posted today
Job Viewed
Job Description
We have an urgent requirement for a Welding Engineer/ Inspector for shutdown/ Maintenance (Oil and Gas EPC Company) at the Saudi Arabia Location.
Qualification - DME/ BE (Mechanical).
Additional Certification:-
CSWIP 3.1, CWI, IWE
Experience (Oil and Gas/ Chemical/ Petrochemical Industry: - Shut Down/ Maintenance).
Min 8 years for DME or Min 5 years for BE.
Shutdown - Brown Field Work Experience preferred.
Duration - 8 Months FTC
Job Description :
1) Understanding of ASME B31.3 & BPVC Sec VIII, ASME SEC IX, AWS D1.1.
2) Knowledge of WPS, PQR, and WQR
3) Support welding troubleshooting
4) Liaise with TPI/PRC for welding-related approvals.
Please mail your resume to:-
( )
In the Mail subject, please mention: - Welding Engineer/ Inspector- Saudi Arabia- Maintenance
Welding Engineer/ Inspector Saudi Arabia
Posted 4 days ago
Job Viewed
Job Description
We have an urgent requirement for a Welding Engineer/ Inspector for shutdown/ Maintenance (Oil and Gas EPC Company) at the Saudi Arabia Location.
Qualification - DME/ BE (Mechanical).
Additional Certification:-
CSWIP 3.1, CWI, IWE
Experience (Oil and Gas/ Chemical/ Petrochemical Industry: - Shut Down/ Maintenance).
Min 8 years for DME or Min 5 years for BE.
Shutdown - Brown Field Work Experience preferred.
Duration - 8 Months FTC
Job Description :
1) Understanding of ASME B31.3 & BPVC Sec VIII, ASME SEC IX, AWS D1.1.
2) Knowledge of WPS, PQR, and WQR
3) Support welding troubleshooting
4) Liaise with TPI/PRC for welding-related approvals.
Please mail your resume to:-
( )
In the Mail subject, please mention: - Welding Engineer/ Inspector- Saudi Arabia- Maintenance
Be The First To Know
About the latest Welding engineer Jobs in India !
Welding Production Engineer
Posted today
Job Viewed
Job Description
Job Title: Welding Production Engineer
Experience: 1 to 3 Years
Salary: Depends on Experience
Job Summary:
We are seeking a skilled and detail-oriented Welding Production Engineer to oversee and manage all welding operations within the production process. The ideal candidate will have expertise in welding techniques, metallurgical properties, and production planning to ensure high-quality outputs while meeting project deadlines and cost targets. This role requires strong leadership, technical expertise, and adherence to safety and quality standards.
Key Responsibilities:
Plan, coordinate, and supervise all welding production activities to meet daily/weekly targets.
Review engineering drawings, specifications, and welding procedures to ensure compliance with design and quality requirements.
Develop and implement Welding Procedure Specifications (WPS) and ensure adherence to approved standards.
Select appropriate welding techniques, materials, and consumables for different projects.
Monitor production processes, identify bottlenecks, and implement corrective actions to improve efficiency.
Conduct inspection and testing of welded joints to ensure compliance with international standards (ASME, AWS, ISO).
Train, guide, and supervise welders to maintain consistent quality and productivity.
Collaborate with the Quality Assurance/Quality Control (QA/QC) team to ensure defect-free production.
Maintain accurate production records, welding logs, and reports.
Enforce safety regulations and promote a safe working environment in welding operations.
Essential Qualifications:
Bachelor’s Degree/Diploma in Mechanical Engineering, Metallurgy, or a related field.
3–5 years of experience in welding production or fabrication engineering.
Certification in Welding Inspection (AWS CWI, CSWIP is highly desirable.
Knowledge of various welding processes such as SMAW, GMAW, GTAW, FCAW, and SAW.
Skills Required:
Strong technical knowledge of welding metallurgy and manufacturing processes.
Ability to read and interpret technical drawings, WPS, and PQR.
Proficiency in using welding equipment, measuring instruments, and inspection tools.
Excellent problem-solving, leadership, and team management skills.
Strong understanding of quality standards (ASME, AWS, ISO 3834).
Knowledge of Lean Manufacturing and production optimization techniques is an advantage.
Good communication skills to coordinate with cross-functional teams.