21 Biomedical Engineer jobs in India

Key Responsibilities: Service

• Adhere to departmental policies and procedures to ensure continuous, safe and quality services of biomedical equipment to clinical care facilities
• Ensure timely resolution of technical problems of the biomedical equipment to ensure smooth functioning of biomedical equipment and highest internal customer satisfaction
• Interface with end-users on an ongoing basis for biomedical equipment maintenance requirements 
• Attend to and ensure prompt response to service call logs and take timely actions
• Perform Installation of Biomedical Equipment in coordination with vendor
• Plan and coordinate with vendor engineer to execute calibration and inspection of the biomedical equipment
• Coordinate with vendor to attend breakdown calls & preventive maintenance calls
• Prioritize and attend to technical crisis and emergency calls keeping the fires safety and security departments informed during emergency
• Ensure equipment and supplies are properly stored as per the safety norms
• Conduct equipment operational and technical training to the end-user for safe and efficient utilization of biomedical equipment
• Execute training programs in collaboration with Service Partner and maintain training documentation
• Collect and document the service report of the maintenance activities carried out by vendor for respective equipment
• Perform Calibration and inspection of the Biomedical equipment
• Maintain hard copies and upload service and training manuals in the HIS for reference and record   
• Prepare and maintain permanent record for each piece of biomedical equipment on HIS
• Monitor the inventory of biomedical equipment, parts and spares and to ensure minimum disruption of patient care.   
• Carry out critical root cause analysis of repeated breakdown event to understand and overcome the frequent breakdown issues of critical equipment
• Perform any other duty as assigned by the HOD from time to time

• Supports patient diagnosis and treatment by installing, testing, calibrating and repairing biomedical equipment; training users; maintaining safe operations.
• Approves new equipment by conducting tests, ensuring adherence to codes and making modifications.
• Installs new equipment by establishing, adjusting, calibrating and testing performance.
• Maintains equipment by completing preventive maintenance schedules, conducting tests and troubleshooting and repairing malfunctions.
• Calls for special equipment service, evaluates service contracts and maintains equipment inventories.
• Directs biomedical equipment operation by providing equipment operation demonstrations, instructing other healthcare staff in use and care of equipment and answering questions.
• Evaluates proposed equipment by conducting tests and evaluations.
• Improves equipment performance by studying machine-patient interaction, conferring with equipment users, developing modifications, and collaborating with manufacturers.
• Maintains supplies inventory by checking stock, anticipating needs, placing and expediting orders, and verifying receipt.
• Prepares biomedical reports by collecting, analyzing, and summarizing information and trends.
• Maintains patient confidence by keeping information confidential.
• Maintains safe and healthy working environment by conducting safety tests, recommending and complying with procedures, training and guiding medical and healthcare personnel and complying with codes.

SKILLS

• Documentation skills
• Analyzing information
• Creating a safe, effective environment
• Infection control
• Training management
• Lab environment
• Clinical lab testing
• Confidentiality
• Equipment calibration
• Sterilization
• Conceptual skills

• Supports patient diagnosis and treatment by installing, testing, calibrating and repairing biomedical equipment; training users; maintaining safe operations.
• Approves new equipment by conducting tests, ensuring adherence to codes and making modifications.
• Installs new equipment by establishing, adjusting, calibrating and testing performance.
• Maintains equipment by completing preventive maintenance schedules, conducting tests and troubleshooting and repairing malfunctions.
• Calls for special equipment service, evaluates service contracts and maintains equipment inventories.
• Directs biomedical equipment operation by providing equipment operation demonstrations, instructing other healthcare staff in use and care of equipment and answering questions.
• Evaluates proposed equipment by conducting tests and evaluations.
• Improves equipment performance by studying machine-patient interaction, conferring with equipment users, developing modifications, and collaborating with manufacturers.
• Maintains supplies inventory by checking stock, anticipating needs, placing and expediting orders, and verifying receipt.
• Prepares biomedical reports by collecting, analyzing, and summarizing information and trends.
• Maintains patient confidence by keeping information confidential.
• Maintains safe and healthy working environment by conducting safety tests, recommending and complying with procedures, training and guiding medical and healthcare personnel and complying with codes.

SKILLS

• Documentation skills
• Analyzing information
• Creating a safe, effective environment
• Infection control
• Training management
• Lab environment
• Clinical lab testing
• Confidentiality
• Equipment calibration
• Sterilization
• Conceptual skills

Qualifications and Skills

• Extensive experience in project management, including planning, execution, and closing of projects, to ensure timely and cost-effective delivery of healthcare IT initiatives.
• Proven proficiency in maintaining cybersecurity protocols to protect sensitive patient data and ensuring compliance with healthcare regulations.
• Strong understanding of cloud computing technologies and their application in the healthcare sector to improve storage and accessibility of data.
• Experience in designing and managing robust network infrastructure to support the operational needs of healthcare facilities.
• Familiarity with the ITIL framework for managing and delivering quality IT services efficiently within a healthcare setting.
• Proficiency in data analytics to extract actionable insights from large sets of healthcare data to aid decision-making processes.
• Proven capability in vendor management to ensure that partnerships and procurements meet the strategic goals and compliance standards.
• Strong skills in agile methodologies to enhance the flexibility and efficiency of IT service development and implementation.

Roles and Responsibilities

• Lead and manage IT teams to deliver strategic technology solutions that meet healthcare business requirements.
• Oversee the implementation of security measures to safeguard critical healthcare information against data breaches and cyber threats.
• Coordinate with healthcare professionals to align IT services with patient care objectives and operational needs.
• Manage cloud-based solutions and services, ensuring reliability and scalability to meet growing healthcare demands.
• Develop and enforce IT policies and best practices to streamline operations and improve IT service delivery.
• Collaborate with key stakeholders to identify IT needs and opportunities for enhancing technology-driven healthcare services.
• Monitor and evaluate IT systems and infrastructure, proposing upgrades or enhancements as necessary to maintain efficiency.
• Negotiate contracts and maintain relationships with external vendors to ensure optimal pricing and service levels.

Company Overview

JD Healthcare Limited, a part of JD Lifesciences, is a dynamic company at the forefront of the medical device industry. With a focus on biomedical equipment and life-saving solutions, we provide innovative and quality products throughout India. Our dedication to reliability and excellence makes us a trusted partner to hospitals and healthcare institutions nationwide.

Job Overview

We are seeking a dedicated Ecommerce Specialist for our medical devices division, located in Nahur, Mumbai. This is a full-time, mid-level position requiring 4 to 6 years of work experience. The successful candidate will excel in driving our ecommerce strategies and proactively managing digital marketing initiatives within the healthcare sector.

Qualifications and Skills

• Proven experience in developing and implementing comprehensive digital marketing strategies tailored towards ecommerce platforms. (Mandatory skill)
• Expert knowledge in utilizing data analytics tools to measure site performance, understand consumer behavior and drive business growth. (Mandatory skill)
• Competency in ecommerce platform management with hands-on experience with platforms such as Shopify and WooCommerce. (Mandatory skill)
• Strong proficiency in product listing optimization aimed at improving visibility and conversion rates on various ecommerce platforms.
• Advanced skills in search engine optimization to enhance product searchability and increase organic traffic.
• Analytical mindset with the ability to interpret data and propose actionable business strategies.
• Excellent communication and teamwork skills for effective collaboration with internal and external stakeholders.

Roles and Responsibilities

• Develop and execute ecommerce strategies to drive sales growth for our medical device offerings.
• Manage day-to-day operations of ecommerce platforms, ensuring optimal performance and user experience.
• Coordinate with marketing teams to devise and implement digital campaigns aligned with business goals.
• Analyze consumer analytics and develop insights to refine marketing and sales strategies.
• Optimize product listings to improve searchability and increase conversion rates.
• Engage in SEO efforts to enhance visibility and ranking on search engines.
• Utilize CRM tools to manage customer interactions and improve service delivery.
• Collaborate with cross-functional teams to leverage business opportunities and drive profitability.

At IF MedTech, we are dedicated to revolutionizing healthcare through cutting-edge medical device design,

development, and pilot manufacturing. Our global team collaborates with experts across medical, engineering,

business, and research domains to bring innovative solutions that enhance healthcare and improve lives. Join us in

our mission to drive innovation and make a global impact in the medical technology sector.

Responsibilities:

● Define, refine, and maintain system architecture across multiple medical devices.

● Identify and document critical subsystems, their interdependencies, and system integration complexity.

● Create and maintain system block diagrams, interface control documents (ICDs), and control/data flow

charts.

● Decompose product requirements into core working principles and coordinate engineering solutions

around them.

● Ensure coherence in product function, behavior, and user experience.

● Conduct early design feasibility assessments to identify critical components that determine system

feasibility

● Map critical development paths, including components with long lead times, dependency risks, and

integration constraints.

● Proactively flag dependencies that can delay product readiness and escalate mitigation strategies.

● Lead the technical integration of mechanical, electronic, firmware, and industrial design subsystems.

● Coordinate to define tolerances, mounting constraints, connector selection, and interface sealing as per

product use case.

● Lead system-level DFMEA/ PFMEA, including interface-level failure modes

● Collaborate with V&V to map requirements to test cases, ensuring test coverage for integrated systems.

● Actively support prototype building and test bench development and debug integration-related during

testing.

● Own the integration readiness checklist for each product milestone.

● Ensure all system-level documentation complies with ISO 13485, ISO 14971, IEC 60601, IEC 62304, and

usability norms.

● Coordinate deliverables with mechanical, electronics, embedded, V&V, usability, and regulatory teams.

● Provide regular technical status updates to the Project Manager, including risk flags, component delays,

and dependency shifts.

● Work closely with the Project Manager to support deliverable tracking, timeline reviews, and milestone

readiness.

Qualifications:

● Bachelor’s or Master’s degree in Mechanical, Electronics, Mechatronics, or Biomedical Engineering.

● 6+ years of experience in medical device product development.

● Must have led the end-to-end development and integration of at least two medical devices.

● Proven hands-on experience in at least one core domain (e.g., mechanical, electronics, embedded systems,

or software), along with a sound understanding of other domains to enable effective cross-functional

collaboration and technical integration.

● Exposure to design for manufacturing (DFM/DFA), sterilization compatibility, and design controls under

ISO 13485.

● Systems thinking and deep attention to cross-domain interactions.

● Proactive communicator and integrator across technical functions.

1. Senior Technical Architect – Medical Devices P-
2. Mechanical Technical Lead – Medical Devices P-

Senior Technical Architect – Medical Devices P-

Key Responsibilities

• • Mechanical Design Engineer with 15-20 Years of experience
• Minimum 8 years’ experience in medical devices, Renal dialysis machines and consumables design .
• Hands on experience in all phases of medical device life cycle (NPD, sustenance, post market support)
• Develop Medical device architecture (Mechanical)
• Proficiency in Plastic, Sheetmetal and machined part design
• Design for compliance with regulatory standards
• Regulatory standards knowledge like IEC 60601-1, MDR 2017/745 or MDR 2017/746, QSR per 21 CFR Part 820, particular standards, collateral standards, FDA510K, UL, CE
• Provide key inputs to the team, take proactive initiatives and thorough knowledge on RCA/troubleshooting.
• Knowledge on Quality Management System as per ISO 13485
• Risk management documentation as per ISO 14971
• DFMEA, PFMEA and SFMEA document preparation and control
• Document and change management process in medical device industry using PDM/PLM software.
• Experience in Obsolescence management.
• Manage complete system Bill of materials.
• Should be cost conscious towards the device and should take up Value Engineering initiatives.
• Design documentation, review critical designs and release for Prototype/Production
• Prototype development and supplier management and detailed DFM reviews.
• Support for Pilot lot assembly & production support
• Support for maintenance of Design History file, Device History Record and Device Master Record documents
• Support for Verification and Validation tests (External and Internal)
• Proficiency in 3D tools like Solid works, Creo, etc.
• Concept Design and Complete Engineering design
• Good mechanical design skills with GD&T and tolerance stack up, FEA and CFD knowledge
• Good knowledge on manufacturing processes- DFM, DFA, DFT
• Material selection proficiency. Assess impact of alternate material and finalization with Supplier.
• Labelling and Packaging design experience

Work Experience

• Work experience with Mechanical part development/tool design, CAD drawings & Manufacturing Drawing
• Good Customer from ending, Delivery Leadership experience as Tech Architect, good Team player, Team management skills.
• Proficiency in Carrying out Tests – Functional test, Critical IEC tests & Particular standards testing.
• Expertise in Change Management process.
• Experience in Sustenance activities in medical products/ Healthcare business
• Good knowledge on ISO 13485 QMS, IEC Standards (General Safety, Particular & Collateral) and MDR
• Ability to take initiatives and drive the project to completion.

Desired Skills:

• Knowledge in Product Life Cycle management and Supplier transfer activities for Mechanical components
• Ability to support engineers by providing new or alternative design solutions and contribute to product development decisions.
• Proficient use of enabling technology, computer and time management skills.
• Having Japanese Visa and willing to work on short term/long time onsite assignment will be added advantage.

Mechanical Technical Lead – Medical Devices P-

• Mechanical Design Engineer with 8-12 Years of experience
• Minimum 6 years’ experience in medical devices industry, Renal dialysis machines and consumables design .
• Hands on experience in all phases of medical device life cycle (NPD, sustenance, post market support)
• Experience in leading a team of mechanical engineers in the medical device industry, providing guidance, mentorship, and technical expertise
• Excellent communication skills to effectively communicate with internal and external stakeholders, presenting technical information clearly and concisely
• Experience in conducting design reviews, design verification, and validation activities to ensure compliance with regulatory requirements and industry standards
• Knowledge of international regulations and standards related to medical devices, ensuring products meet global market requirements
• Continuous improvement mindset, identifying opportunities to enhance design processes, reduce costs, and improve product performance
• Ability to adapt to changing priorities and work in a fast-paced, dynamic environment while maintaining attention to detail and quality standards
• Passion for innovation and staying updated on emerging technologies and trends in the medical device industry
• Ability to collaborate with cross-functional teams including R&D, Quality, Regulatory, and Manufacturing to ensure successful product development and launch
• Develop Medical device architecture (Mechanical)
• Design for compliance with regulatory standards
• Design Control documentation for Renal care disposables products
• Risk management documentation as per ISO 14971
• DFMEA, PFMEA and SFMEA document preparation and control
• Prototype development and supplier management and detailed DFM reviews.
• Support for Verification and Validation tests
• Proficiency in 3D tools like Solid works, Creo, etc.
• Proficiency in GD&T and tolerance stack up

Work Experience

• Work experience with Mechanical part development, CAD drawings & Manufacturing Drawing.
• Proficiency in Carrying out Tests – Functional test, Critical IEC tests & Particular standards testing.
• Expertise in Change Management process. Experience in Sustenance activities in medical products/ Healthcare business.
• Good knowledge on ISO 13485 QMS, IEC Standards (General Safety, Particular & Collateral) and MDR.
• Ability to take initiatives and drive the project to completion.
• Lead team effectively and work closely with customers. Project scheduling and planning.

Desired Skills:

• Experience in medical devices industry is mandatory, Renal dialysis machines and consumables design
• Knowledge of Product Life Cycle management and Supplier transfer activities for Mechanical components.
• Ability to support engineers by providing new or alternative design solutions and contribute to product development decisions.
• Proficient use of enabling technology, computer, and time management skills.
• Strong communication skills to effectively collaborate with cross-functional teams and external stakeholders in the medical devices industry.

Summary:

The industrial designer is typically focused on the user experience, desirability, physical

appearance, functionality, and manufacturability of a product, though they are often

involved in far more during the development cycle. The designer brings specialized

competencies to an interdisciplinary team as they attempt to find solutions for problems

of form, function, usability, physical ergonomics, marketing and brand development,

sustainability, and sales.

Responsibilities:

● Responsible for defining product offerings, form development, human factors

and ergonomics, material selection, finishes, color, brand language and graphical

user interfaces.

● Support a product development team with visual communication in all phases of

the product development process.

● Act in the role of the product development team’s synthesizer, using a diverse set

of design tools and methods to create probes for the purpose of gaining valuable

feedback from the team and customers. A designer should be quick to action and

create concepts through sketching, visual storytelling, and physical prototypes.

● Develop and facilitate research to gain key end user insights for concept

generation and design usability validation.

● Actively participate in strategic discussions/planning regarding product

development and development direction.

● Inform the project team of key trends in design-related topics such as product

design, color, materials and finishes. Assure product concepts proposals are

inclusive of market winning attributes consistent with, or inspired by, global

design and technology trends.

● Manage the external design partners when necessary.

Qualifications and Experience:

● Bachelor's or Master's degree in Industrial Design or Product Design.

● Minimum of 1 year of professional industrial or medical device design

experience.

● Must be fully proficient in CAD surfacing and parametric modeling software such

as Solidworks, Creo, Rhino, Blender, etc.

● Very good Keyshot rendering and 3D visualization skills and experience.

● Excellent working proficiency with the Adobe creative suite (Photoshop and

Illustrator are essential)

● Good Industrial design sketching and oral and verbal presentation techniques to

communicate ideas.

● Must have excellent communication skills to lead conversations, solve technical

challenges, and mentor and facilitate discussions with other clients on design-

related challenges and innovative opportunities.

● Very good CAD model-making skills are required to communicate the product

look and feel of designs.

Location: BETIC, IIT Bombay, Mumbai, Maharashtra, India