227 Electrical Design Engineer jobs in Delhi

Key Skill: -
PLC Wiring

Roles and Responsibilities -

• Execution of the projects as per the given deadlines.
• Candidate should have knowledge of reading electrical Drawing.
• Candidate should have experience of PLC wiring, VFD drive.
• Candidate Should have knowledge of hard wiring (Relay & Contractor)
• Candidate should have knowledge of sensors wiring.
• Handle the entire process from selections and procurement of equipment's like sensors, PLCs etc.
• Monitor & provide support and guidance to the operational activities of the electrical department; reviewing systems and processes to accommodate the demanding operational environment.
• Site installation of electrical panels and equipment at site.
• Execution of electrical work at site and in house.

Skills we required:

• Should have knowledge of basic electrical & electronics like- transformers, motors, switch gears, logic gates, transistors, diodes, relays.
• Average Communication Skills.
• Should have knowledge of panel wiring, panel designing and PLC
• Able to manage team of electricians to execute the given projects.
• Open for Pan India Travelling.

About the Job

Skills

electrical design

building projects

detail design

Design & Procurement (preparing technical specifications, resolving pre-bid queries,

vendor drawing review, etc.) Experience 5 - 6 Years in Airport, Metro, Hospital,

Factories Building, Ports, High Rise Bldg, etc in a Contracting / consultancy firm.

Minimum Qualification: B.E. / B.Tech Electrical Engineering

Aptitude towards adaption of new technologies to improve productivity and quality

Must be pro-active and well communicative in approach.

Experience in designing procurement of AIS / GIS / Hybrid type 66KV /33KV/11KV

Substations, Compact Substations (CSS), switch yard hardwares e.g., Clamps,

Connectors, insulator strings shall be an added advantage

Must have completed Minimum 02 Projects from Design to Hand over stage

independently.

Experience in project planning, scheduling, monitoring &; work delegation to designers

Well versed with Codal Requirement in Substation electrical Design

Hands on experience of relevant IS / BS / IEC / NEC / NFPA / NBC/ Green building/

GRIHA standards/ requirements during design

Experience in designing and selection of HT switch gears (Circuit Breakers, Isolators,

Load Break Switch, Surge Arrestor, Earth Switches, etc)

Experience in designing, procurement selection of LT distribution system switchgear/ panels, Bus Ducts/ Bus riser/ Trunking systems

Experience in designing, sizing, procurement selection of Power distribution

Transformers / DG sets/ UPS systems

Experience in selection of HT LT Cables base on short circuit, voltage drop calculation

Experience in design calculations viz. fault level calculation, earthing, lightning

protection, lighting, relay co-ordination, etc.

Experience in Peer Review of design, drawings, documents.

Experience in analysing RFP/ Tender Documents, Drgs, etc, raising of Pre-bid queries

Leading Technical discussions with client, consultant, PMC, vendors and other stake

holders (interaction with government/ public sector officials shall be added advantage)

Hands on experience in preparation of Concept Design Documents Drgs, estimating

BoQs at RFP stage preparation of detailed BoQ during design.

Hands on experience in preparation of Design Basis Report (DBR) layouts (power,

cable tray, lighting, lightning protection, substation, etc.)

Familiarization with AUTOCAD, BIM operation

Hand on experience on review of MEP coordinated drawing

Experience in factory witness test of transformers, DG testing, HT LT panels, UPS

Candidate should have knowledge of plant design, site engineering, load estimation, SLD, selection, sizing, plant lighting, substation / switchyard design, cable selection & sizing, cost estimation and evaluation, electrical drawings & layouts.

Company Description

GLOBAL Hydro Energy is a worldwide leader in hydropower technologies, specializing in Kaplan, Pelton, and Francis turbines with capacities ranging from 100 kW to 30 MW. With innovative solutions like HEROS 4.0, a fully automated turbine and plant control system, and smarT, a fully assembled PLUG-IN power plant solution, we provide sustainable package solutions to our customers. With over 80 years of experience, we are committed to ensuring a livable environment for future generations.

Role Description

This is a full-time role for an Electrical Design Engineer at GLOBAL Hydro Energy. As an Electrical Design Engineer, you will be responsible for designing and engineering electrical systems for hydropower plants. This includes power distribution, electrical design, and ensuring the safe and efficient operation of electrical equipment. This is an on-site role located in Noida.

To prepare complete SLD for the project.

Must have good command on E-Plan Electric P8 2023 or 2024

Preparation of communication overview for projects based on tender specification.

Good command on designing Electric AC & DC schematics.

Good Knowledge of products and instruments like MFM, Exciter, Governor.

Good Knowledge of PLC system designing.

D model designing of cubicles (General arrangement and internal arrangement)

Cable length calculation.

Qualification :

Must have good communication skills. In English

Vendor Coordination

Attending inspections at Vendor end.

Customer interaction and discussions for approval and technical modifications.

3-5 year (Electrical panel industry candidate preferred)

Apply with Minimum 4-to-10-year experience only in Electrical Design with E-Plan software knowledge

We are seeking a skilled Electrical Design Engineer with expertise in electrical design calculations, AutoCAD, and Revit. The ideal candidate will be responsible for designing, developing, and reviewing electrical systems for various projects, ensuring compliance with industry standards and regulations.

Key Responsibilities:

• Design and develop electrical systems for residential, commercial, and industrial projects.
• Perform electrical load calculations, short circuit analysis, voltage drop calculations, and cable sizing.
• Prepare single-line diagrams (SLDs), schematics, and electrical layouts using AutoCAD and Revit.
• Coordinate with architects, mechanical engineers, and other stakeholders to ensure seamless integration of electrical systems.
• Ensure designs comply with national and international codes such as NEC, IEC, IS, and other relevant standards.
• Conduct site visits for inspections, testing, and troubleshooting of electrical installations.
• Assist in the preparation of BOQs, technical specifications, and project documentation.
• Stay updated on the latest trends, materials, and technologies in electrical design and engineering.

Requirements:

• Bachelors degree in Electrical Engineering or a related field.
• Minimum 4 years of experience in electrical design engineering.
• Proficiency in AutoCAD and Revit for electrical drafting and modeling.
• Strong knowledge of electrical calculations
• Familiarity with electrical codes and standards (NEC, IEC, IS, etc.).
• Ability to work collaboratively in a multidisciplinary environment.
• Strong problem-solving skills and attention to detail.

• To produce design and drawings for electrical system for the assigned projects tasks site survey and data assigned projects for design.
• Preparation of diagrams.
• Control schemes, interconnect and block diagrams. Preparation of electrical system layouts for earthing & Lighting.
• Coordinate with R&D, Mechanical Design, Purchase, and Production teams for smooth execution.
• Assist in troubleshooting and resolving design-related issues during production and site execution.
• Excellent proficiency in AutoCAD

Desired Profile: Diploma/B. Tech (Electrical) with 1 to 2 year experience.

Knowledge of Auto-cad mandatory.

Candidate ready to relocate to Noida.

Salary not constrain for deserving candidate.

Male/Female both can apply @

Job Type: Full-time

Pay: ₹18,000.00 per month

Key Responsibilities: -

• Maintain inventory for the Electrical Equipment's.

• Electrical CAD & E-Plan drawings.

• Maintenance, services and troubleshooting of SPM's.

• Panel layout designing.

• Wiring up the SPM's

Should have knowledge of following points :-

ü Electrical panels layouts.

ü Control and operator panels wiring.

ü Sensors, cylinder read switches

ü Pneumatic wiring and pipings.

ü Good hand on Autocad

These are some required qualities for Electrical Designer :

· Experience with electrical control design, electric panel design, circuit design Input/Output)

· Proficient in software package such as Autocad/ E-plan and Microsoft applications.

· Have knowledge of electrical basic calculations.

· Being analytic and strategic.

· Basic Knowledge of sensors, Drives, PLC and panel wiring require.

· Can handle the work individually.