193 Quality Control jobs in Delhi

• Conducting Inspection of incoming material and reviewing the material testing certificates. Also conducting Third Party Testing of Material as per ITP
• To ensure that site activity goes as per Construction Methodology, Technical Specification & Drawing.
• All QC Laboratory document preparation like work procedures, ITP, QAP, Checklist, formats required for carrying out project specific activity and testing as per project specifications and codes of practice.
• Keeping record of Calibration status and conduct regular calibration of all lab testing equipment & batching plant.
• Daily check concrete mix design on batching plant, Check all Work activity With Check List.
• Coordinating with client for the field-testing, pre and post concrete inspection and obtaining approvals.
• Audit: Prepare and faced ISO9001, ISO 14001 & ISO 45001 – TUV NORD audit process at INRP, BARC Project at Hindustan Construction Company Ltd.

Testing of Materials

• Brick: Dimension And Tolerances, Compressive Strength, Water Absorption, Efflorescence.
• Fine Aggregate: Silt Content, Sieve Analysis, Moisture Content, Density, Voids & Bulking.
• Coarse Aggregate: Sieve Analysis, Crushing Value, Impact Value, Flakiness Index, Elongation Index, Specific Gravity, Absorption And Bulking, Soundness Test, Density.
• Cement Test: Fineness Test, Consistency Of Cement, Soundness Test, Initial Setting Time, Final Setting Time, Compressive Strength.
• Steel Test: Rolling Margin, Tensile Test, Elongation Test, Chemical Composition – Carbon, Sulphur Phosphorus Sulphur And Phosphorus Limit And Bend – Rebend
• MS Pipe: Rolling Margin And Tolerances.
• Concrete Test: Slump Test, Cube Compressive Strength.
• Soil Test: Dry Density Of Soil By Core Cutter Method.
• Stone Dust, Fly Ash Brick And Block, Kota Stone , Marble Stone Water Test Etc ,

Industry: Construction  /  Engineering  /  Cement  /  Metals

Functional Area: Quality control

Role Category: Engineering

Role: QC Engineer/Quality Engineer

Employment Type: Permanent Job, Full Time

We are seeking an experienced QC Engineer (Piping) to join our team for a project at Panipat Refinery (P25 expansion project). In this role, you will be responsible for ensuring all piping fabrication, erection, and testing activities meet the required quality standards, project specifications, and applicable codes. You will conduct inspections, coordinate with site teams, and maintain compliance throughout all phases of the piping works.

Key Responsibilities:

• Implement quality control procedures and inspection plans for piping works.
• Inspect piping materials, fabrication, welding, and installation for compliance with project specifications.
• Review and verify quality documentation, material certificates, and NDT reports.
• Monitor hydrotesting, pneumatic testing, and other piping system tests.
• Coordinate with construction teams, subcontractors, and third-party inspectors to resolve quality issues.
• Maintain accurate inspection records and prepare reports for audits and client review.

Requirements:

• Bachelor’s degree or diploma in Mechanical Engineering.
• Minimum 5 years of QC experience in piping projects within the oil and gas industry.
• Strong knowledge of ASME, ASTM, API codes and relevant piping standards.
• Certifications such as CSWIP 3.1, AWS-CWI, or ASNT Level II and III in RT/UT/MT/PT preferred.
• Good understanding of welding processes, material specifications, and testing procedures.
• Strong attention to detail, documentation, and problem-solving skills.

Accommodation and meals will be provided by the company.

We are seeking an experienced QC Engineer (Piping) to join our team for a project at Panipat Refinery (P25 expansion project). In this role, you will be responsible for ensuring all piping fabrication, erection, and testing activities meet the required quality standards, project specifications, and applicable codes. You will conduct inspections, coordinate with site teams, and maintain compliance throughout all phases of the piping works.

Key Responsibilities:

• Implement quality control procedures and inspection plans for piping works.
• Inspect piping materials, fabrication, welding, and installation for compliance with project specifications.
• Review and verify quality documentation, material certificates, and NDT reports.
• Monitor hydrotesting, pneumatic testing, and other piping system tests.
• Coordinate with construction teams, subcontractors, and third-party inspectors to resolve quality issues.
• Maintain accurate inspection records and prepare reports for audits and client review.

Requirements:

• Bachelor’s degree or diploma in Mechanical Engineering.
• Minimum 5 years of QC experience in piping projects within the oil and gas industry.
• Strong knowledge of ASME, ASTM, API codes and relevant piping standards.
• Certifications such as CSWIP 3.1, AWS-CWI, or ASNT Level II and III in RT/UT/MT/PT preferred.
• Good understanding of welding processes, material specifications, and testing procedures.
• Strong attention to detail, documentation, and problem-solving skills.

Accommodation and meals will be provided by the company.

We are seeking an experienced QC Engineer (Piping) to join our team for a project at Panipat Refinery (P25 expansion project). In this role, you will be responsible for ensuring all piping fabrication, erection, and testing activities meet the required quality standards, project specifications, and applicable codes. You will conduct inspections, coordinate with site teams, and maintain compliance throughout all phases of the piping works.

Key Responsibilities:

• Implement quality control procedures and inspection plans for piping works.
• Inspect piping materials, fabrication, welding, and installation for compliance with project specifications.
• Review and verify quality documentation, material certificates, and NDT reports.
• Monitor hydrotesting, pneumatic testing, and other piping system tests.
• Coordinate with construction teams, subcontractors, and third-party inspectors to resolve quality issues.
• Maintain accurate inspection records and prepare reports for audits and client review.

Requirements:

• Bachelor’s degree or diploma in Mechanical Engineering.
• Minimum 5 years of QC experience in piping projects within the oil and gas industry.
• Strong knowledge of ASME, ASTM, API codes and relevant piping standards.
• Certifications such as CSWIP 3.1, AWS-CWI, or ASNT Level II and III in RT/UT/MT/PT preferred.
• Good understanding of welding processes, material specifications, and testing procedures.
• Strong attention to detail, documentation, and problem-solving skills.

Accommodation and meals will be provided by the company.

JoVE is the world- leading producer and provider of video solutions with the mission to improve scientific research and education. Millions of scientists, educators and students use JoVE for their research, teaching and learning. Our institutional clients comprise over 1,000 universities, colleges, and biopharma companies, including such leaders as Harvard, MIT, Yale, and Stanford. As a rapidly growing company, with offices in the USA, UK, Australia, and India servicing clients in over 60 countries, we are seeking talented and ambitious individuals to join our company.

The Role

We are seeking a detail-oriented Quality Control (QC) Manager to oversee the end-to-end review of our animated educational video collections across disciplines such as business, mathematics, physical sciences, and life sciences. As QC Manager, you will manage the quality review of video collections and will coordinate closely with the content development and production teams to ensure accuracy, clarity, and on-time delivery. You will also hire, guide, and manage freelance subject matter expert (SME) reviewers to maintain the highest standards of quality and academic rigor.

Responsibilities

• Review animated educational concept videos for academic accuracy, conceptual clarity, animation–script alignment, and pedagogical value.
• Understand and comment meaningfully on a variety of 2D visual representations, such as animated characters, abstract icons, graphs, and metaphoric visuals.
• Ensure all videos meet JoVE’s standards for scientific/academic quality, accessibility, and instructional coherence.
• Collaborate with both the content and production teams to resolve feedback and maintain quality through iterations.
• Track progress across multiple active video collections simultaneously in the Google ecosystem (Google Sheets and Docs), managing timelines, assignments, review status, and QC progress.
• Lead the recruitment, onboarding, and performance management of freelance SME reviewers, ensuring consistent standards and turnaround times.

Requirements:

• A Master’s or Ph.D in STEM, business, or education.
• 3–6 years of experience in academic content QC or educational video production.
• Proven ability to manage multiple short-term projects in parallel using Excel or other tracking tools.
• Exceptional attention to detail, with the ability to spot both content errors and production glitches.
• Excellent communication skills—must be able to give constructive feedback clearly.
• Strong working knowledge of Google Workspace (Docs, Sheets, Drive, etc.)
• Familiarity with 2D animation formats and ability to give feedback on visual storytelling and pacing.
• Experience working with cross-functional creative teams, managing timelines and content revisions.
• Ability to work independently in a fast paced environment.

Why Join JoVE?

• When working with JoVE, you can expect salary and benefit package competitively placed within the local market.
• You will make a direct impact in accelerating science research and in improving student learning in science education.
• Opportunity to work with global teams and in an environment that promotes innovation and collaboration.
• Our strong promotion from within culture draws a clear path to advance your career with us.