157 Cae Engineer jobs in India

We’re Hiring: Durability Analysis Engineer | Vadodara / Pune

Experience: 5–10 Years

Qualification: BE/B.Tech/ME/M.Tech

Openings: 2 Positions

Role Overview

We’re looking for experienced Durability Analysis Engineers to develop and optimize FEA models for vehicle systems. The ideal candidate will have deep expertise in fatigue life evaluation, vibration endurance, and load-bearing analysis for complete vehicle structures.

Key Responsibilities

• Develop detailed FEA models for vehicle durability and fatigue life prediction.
• Perform road load data analysis and correlate with CAE fatigue results.
• Use tools like Ncode , Abaqus , and Nastran for cyclic load and damage prediction.
• Optimize structural load paths, material fatigue thresholds, and road load transfers.
• Design and execute durability test plans for vehicle systems and components.
• Correlate virtual to physical test results and document recommendations.

Required Skills

Expertise in Durability / Fatigue Analysis

Strong in FEA tools – Ncode, Abaqus, Nastran, ANSA

Experience with chassis, suspension, body structures, and powertrain mounts

Ability to simulate and validate solutions for real-world conditions

Apply Now:

Location: Noida

Department:FEA & PipingDepartment

Experience Required: 0-1 experience. Bachelor’s/Master’s degree in Mechanical Engineering, Structural Engineering, Piping Engineering, AerospaceEngineering, or a related field.

Job Summary:

We are seekingan Engineer with strong technical understanding of Solid Mechanics, Strength of Material etc. Familiar with industry codes (ASME, API, ASTM, AISC etc.). The ideal candidate will perform structural, thermal, and piping system simulations to ensure the reliability, safety, and performance of designs.

Key Responsibilities:

• Perform FEA-based simulations for structural, thermal,fatigue, and vibration analysis.
• Develop and validate numericalmodels for linear,non-linear, and transientanalysis.
• Conduct pipe stress analysisfor thermal, seismic,wind, and pressureloads.
• Perform calculations using CaesarII, AutoPIPE to ensure compliance with ASME and API standards.
• Identify thermal expansion, nozzleloads, and supportplacements to avoid failures.
• Ensure designs comply with ASME, API, ASTM, AISC, ASCE and other standards.
• Document FEA/Pipe stress methodologies, assumptions, and analysisreports.
• Optimize simulation methodologies to improve accuracyand reduce computational cost.

Software & Tools Expertise:

• Use FEA tools: ANSYS,and NASTRAN, etc.
• Use Pipe Stress tools:Caesar II, and AutoPIPE, etc.

Technical Skills:

• Knowledge of FEA and Pipe StressAnalysis.
• Solid understanding of Solid Mechanics, Strengthof Material, etc.
• Understanding of seismic, wind,and vibration load analysis.

Soft Skills:

• Strong problem-solving and analytical skills and good communication skillsfor presenting results and reports.
• Ability to handle multipleprojects.

Looking For CAE Modelling Using ANSA Professionals For Global IT MNC @Bangalore

Greetings From 2COMS Group! Location: Bangalore Experience:  4+ years Must-Have: CAE Modeling For NVH or Durability Using ANSA Job Description:  * 4-8 Years of experience in modeling for NVH or Durability CAE models using ANSA

 * Should be proficient in FE Modeling (Plastics/Solid/Sheet metal) and Connection in ANSA.

 * Knowledge of debugging the model is an added advantage

 * Familiarity with CATIA 3D & 2D data extraction would be added advantage

**Company Description**
**Work with Us. Change the World.**
At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world's most complex challenges and build legacies for future generations.
There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world.
We're one global team driven by our common purpose to deliver a better world. Join us.
**Job Description**
**A) GENERAL**
* Senior technical resource may serve as technical advisor for team and shall lead a team
for set of projects.
* Provides specialized technical input to studies and design for staff's specific area of
expertise.
* Develops study and design procedures to facilitate high-quality cost-effective work by others.
* Participates in interdisciplinary review of project deliverables.
* Develops construction cost estimates and estimates of technical efforts for projects.
* Uses expertise in all steps of completing discipline component of PL-FF package.
* Performs quality control review of design calculations or drawings.
* Prepares technical specification sections.
* Provides input to the development of engineering budget and schedule to meet
requirements.
* Represents company at Senior level before clients and stakeholders.
**JOB DESCRIPTION FOR PLUMBING SYSTEM DESIGN**
Design of Plumbing system shall consist of (but not limited to) the following -
+ Understanding and categorizing of project into type of Building as per National Building Code of India 2016.
+ Conceptualization of design theme.
+ Performing hydraulic calculations for determining the flowrates, head and pipe sizes for various systems under Plumbing.
+ Preparing Water demand calculations and Water Balance diagram.
+ Preparation of Design Basis Report for Plumbing System along with required drawings/sketches.
+ Estimating of Water storage / reserve to be planned. Deciding size and arrangement of U.G and O.H storage tanks. Planning of pump room with equipment, networking of pumps, piping, panel etc.
+ Preparation of Water supply & Drainage schematic.
+ Preparation of Schematic layouts for water supply, internal drainage, external drainage etc.
+ Estimation of Power demand for Plumbing system.
+ Preparation of Automation scheme for water tanks, deciding minimum I/Os required.
TENDER & PROCUMENT:
+ Preparation of Tender documents includes detailed Plumbing Layouts, Technical Specification, approved make List & BOQ for Tender enquiry.
+ Techno-Commercial Evaluation of different types of Plumbing equipment & selection of optimum solution in view of project requirement.
+ Preparation of block estimates based on available rates or through rate analysis.
+ Techno-Commercial Evaluation of technical bids.
+ Attending pre-bid meetings.
GOOD FOR CONSTRUCTION STAGE:
+ Preparation of Plumbing GFC layouts and sections.
+ Coordination of layouts with Architectural, Structural/Civil and other disciplines.
CONSTRUCTION ADMINISTRATION:
+ Timely completing Vendor data reviews such as that of Shop Drawings, Product Submittals, GA Drawings etc., participating in discussion with Authorities, witnessing testing of equipment etc.
+ Attending meetings with Client or Client representatives as per decided schedule. Site visits as and when required.
DOCUMENTATION PROCESSES:
+ Actively coordinating with various disciplines such as Architecture, Civil, Structural etc.
+ Strictly adhering to company processes such as obtaining reviews from assigned experts, inter-disciplinary checks from various disciplines and clearances from discipline leaders.
IT/SOFTWARE SKILLS:
+ Proficiency in use of M.S office.
+ Knowledge of AutoCAD.
+ Knowledge and preferably experience on REVIT 3D.
**JOB DESCRIPTION FOR FIRE FIGHTING SYSTEM DESIGN**
Design of Fire Fighting system consists of (but not limited to) the following -
+ Understanding and categorizing of project into applicable Class of Fire .
+ Conceptualization of design theme.
+ Preparation of Design Basis Report for Fire Fighting System along with required drawings/sketches.
+ Designing of Fire Fighting system and its equipment adhering to NBC/IS/NFPA norms or guidelines consisting of (but not limited to):
+ Hydraulic calculation of water flowrate required for effective Fire Fighting. Selection of Pump capacity accordingly.
+ Estimating of Water storage / reserve. Deciding size and arrangement of U.G and O.H storage tanks. Planning of Fire pump room, networking of pumps.
+ Preparation of Sprinkler system schematic layouts referring provisions given in standards.
+ Hydraulic design of Sprinkler system using Pipenet.
+ Preparation of Hydrants schematic layouts referring criteria given in standards.
+ Hydraulic design of Wet-riser network using Pipenet.
+ Design of Preaction system.
+ Design of Gas suppression system.
+ Selection and planning of Fire Extinguishers on layouts.
+ Planning, design and preparation of Water curtains for compartmentation.
+ Preparation of Schematic Fire fighting layouts & Fire SLD.
+ Gas suppression system.
TENDER & PROCUREMENT:
+ Preparation of Tender documents includes detailed Fire Fighting Layouts, Technical Specification, approved make List & BOQ for Tender enquiry.
+ Techno-Commercial Evaluation of different types of fire pumps & selection of optimum solution in view of project requirement.
+ Preparation of block estimates.
+ Techno-Commercial Evaluation of technical bids.
+ Attending pre-bid meetings.
GOOD FOR CONSTRUCTION STAGE:
+ Preparation of Fire Fighting GFC layouts and sections.
+ Coordination of layouts with Architectural, Structural/Civil and other disciplines.
CONSTRUCTION ADMINISTRATION:
+ Timely completing Vendor data reviews such as that of Shop Drawings, Product Submittals, GA Drawings etc., participating in discussion with Authorities, witnessing testing of equipment etc.
+ Attending meetings with Client or Client representatives as per decided schedule. Site visits as and when required.
DOCUMENTATION PROCESSES:
+ Actively coordinating with various disciplines such as Architecture, Civil, Structural etc.
+ Strictly adhering to company processes such as obtaining reviews from assigned experts, inter-disciplinary checks from various disciplines and clearances from discipline leaders.
Process Engineering:
+ Should have In-depth knowledge of designing WTP for industrial/Residential/Commercial/Food industry/advanced manufacturing/Leather industry/Hotels/Hospitality/semi- conductor projects including process for preliminary treatment for domestic water and in addition process water generation like soft water, RO water, DI/DM water, EDI, UPW etc.
+ Should have In depth knowledge of designing WWTP (ETP) for industrial/Residential/Commercial/Food industry/advanced manufacturing/Leather industry/Hotels/Hospitality/semi- conductor projects including recycling the effluent to process water using Zero Liquid Discharge processes.
+ Should have In depth knowledge of designing STP for industrial/Residential/Commercial/Food industry/advanced manufacturing/Leather industry/Hotels/Hospitality/semi- conductor projects including process for preliminary treatment for domestic water and in addition process water generation like soft water, RO water, DI/DM water, EDI, UPW etc.
IT/SOFTWARE SKILLS:
+ Use of Navisworks for review of Model.
+ Experience of working on Pipenet Spray/Sprinkler module.
+ Proficiency in use of M.S office.
+ Knowledge of AutoCAD.
**Qualifications**
**Additional Information**
**About AECOM**
AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.
AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients' complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle - from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com.
**What makes AECOM a great place to work**
You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you'll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you've always envisioned. Here, you'll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity.
As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.
**ReqID:** J
**Business Line:** Building Engineering
**Business Group:** DCS
**Strategic Business Unit:** Europe & India
**Career Area:** Engineering
**Work Location Model:** Hybrid

Our client is offering an exceptional opportunity for an enthusiastic Mechanical Engineering Apprentice to join their innovative team in Pune, Maharashtra, IN . This apprenticeship program is designed to provide hands-on training and practical experience in a real-world manufacturing and design environment. The apprentice will work closely with experienced mechanical engineers, gaining exposure to various aspects of the engineering lifecycle, from design and prototyping to testing and production. Key responsibilities will include assisting in the development of mechanical designs, creating and modifying CAD models, and participating in the assembly and testing of mechanical components and systems. The apprentice will also be involved in conducting performance tests, documenting results, and supporting the troubleshooting of engineering issues. This role requires a strong foundational understanding of mechanical engineering principles, acquired through academic study. The ideal candidate will be a recent graduate or a student nearing completion of a Bachelor's degree in Mechanical Engineering. Curiosity, a keen interest in problem-solving, and a willingness to learn are essential qualities. The ability to follow instructions, work collaboratively in a team, and maintain a high level of attention to detail will be critical for success. This apprenticeship offers a structured learning path, mentorship from industry professionals, and exposure to cutting-edge technologies. It is an ideal stepping stone for aspiring mechanical engineers looking to build a solid career foundation. Join our client's team and contribute to exciting projects while developing your engineering skills in a supportive and challenging setting.

Our client is offering an exceptional Apprenticeship opportunity for motivated individuals seeking to gain hands-on experience in Mechanical Engineering within their facility in **Ghaziabad, Uttar Pradesh, IN**. This program is designed to provide comprehensive training and practical exposure to various aspects of mechanical engineering under the guidance of experienced professionals. Apprentices will have the chance to work on real-world projects, learn essential technical skills, and develop a strong foundation for a successful career in the field. The apprenticeship will involve assisting engineers and technicians in designing, developing, manufacturing, and testing mechanical components and systems. Key learning areas may include CAD software operation, material selection, manufacturing processes, quality control, and equipment maintenance. Apprentices will be expected to actively participate in training sessions, follow instructions meticulously, and contribute to team projects. This is a fantastic opportunity for individuals who are eager to learn, possess a strong work ethic, and have a keen interest in mechanical principles. A high school diploma or equivalent is required. A basic understanding of physics and mathematics will be beneficial. We are looking for candidates who are reliable, possess good communication skills, and are committed to developing their professional capabilities. The apprenticeship duration is typically for one year, with the potential for full-time employment upon successful completion based on performance and business needs. Join us to gain invaluable practical experience and kickstart your career in mechanical engineering in a supportive and industrial environment.